ath79: add new OF only target for QCA MIPS silicon

[openwrt/staging/hauke.git] / target / linux / ath79 / dts / ar7242_buffalo_wzr-hp-g450h.dts

diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
new file mode 100644 (file)
index 0000000..826790f
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7242.dtsi"
+
+/ {
+       compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
+       model = "Buffalo WZR-HP-G450H";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               poll-interval = <20>;
+               button@0 {
+                       label = "usb";
+                       linux,code = <BTN_2>;
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               button@1 {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               button@2 {
+                       label = "movie_engine";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+                       debounce-interval = <60>;
+               };
+
+               button@3 {
+                       label = "aoss";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               button@4 {
+                       label = "router_off";
+                       linux,code = <BTN_5>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+                       debounce-interval = <60>;
+               };
+
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               led@0 {
+                       label = "buffalo:orange:security";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+
+               led@1 {
+                       label = "buffalo:red:diag";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               gpio_usb_power {
+                       gpio-export,name = "wzr-hp-g450h:usb-power";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+       phy-mask = <0x1>;
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "rgmii";
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-mode = "rgmii";
+       pll-data = <0x62000000 0 0>;
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k@0000 {
+               reg = <0x0000 0 0 0 0>;
+               qca,no-eeprom;
+       };
+};