ath79: drop, its not ready for a release yet
[openwrt/staging/blogic.git] / target / linux / ath79 / dts / ar9132.dtsi
diff --git a/target/linux/ath79/dts/ar9132.dtsi b/target/linux/ath79/dts/ar9132.dtsi
deleted file mode 100644 (file)
index 7a7a5f1..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/ath79-clk.h>
-
-/ {
-       compatible = "qca,ar9132";
-
-       #address-cells = <1>;
-       #size-cells = <1>;
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       device_type = "cpu";
-                       compatible = "mips,mips24Kc";
-                       clocks = <&pll ATH79_CLK_CPU>;
-                       reg = <0>;
-               };
-       };
-
-       cpuintc: interrupt-controller {
-               compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-
-               qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
-               qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
-                                       <&ddr_ctrl 0>, <&ddr_ctrl 1>;
-       };
-
-       ahb {
-               compatible = "simple-bus";
-               ranges;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               interrupt-parent = <&cpuintc>;
-
-               apb {
-                       compatible = "simple-bus";
-                       ranges;
-
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       interrupt-parent = <&miscintc>;
-
-                       ddr_ctrl: memory-controller@18000000 {
-                               compatible = "qca,ar9132-ddr-controller",
-                                               "qca,ar7240-ddr-controller";
-                               reg = <0x18000000 0x100>;
-
-                               #qca,ddr-wb-channel-cells = <1>;
-                       };
-
-                       uart: uart@18020000 {
-                               compatible = "ns8250";
-                               reg = <0x18020000 0x20>;
-                               interrupts = <3>;
-
-                               clocks = <&pll ATH79_CLK_AHB>;
-                               clock-names = "uart";
-
-                               reg-io-width = <4>;
-                               reg-shift = <2>;
-                               no-loopback-test;
-
-                               status = "disabled";
-                       };
-
-                       gpio: gpio@18040000 {
-                               compatible = "qca,ar9132-gpio",
-                                               "qca,ar7100-gpio";
-                               reg = <0x18040000 0x30>;
-                               interrupts = <2>;
-
-                               ngpios = <22>;
-
-                               gpio-controller;
-                               #gpio-cells = <2>;
-
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                       };
-
-                       pll: pll-controller@18050000 {
-                               compatible = "qca,ar9132-pll",
-                                               "qca,ar9130-pll";
-                               reg = <0x18050000 0x20>;
-
-                               clock-names = "ref";
-                               /* The board must provides the ref clock */
-
-                               #clock-cells = <1>;
-                               clock-output-names = "cpu", "ddr", "ahb";
-                       };
-
-                       wdt: wdt@18060008 {
-                               compatible = "qca,ar7130-wdt";
-                               reg = <0x18060008 0x8>;
-
-                               interrupts = <4>;
-
-                               clocks = <&pll ATH79_CLK_AHB>;
-                               clock-names = "wdt";
-                       };
-
-                       miscintc: interrupt-controller@18060010 {
-                               compatible = "qca,ar9132-misc-intc",
-                                          "qca,ar7100-misc-intc";
-                               reg = <0x18060010 0x8>;
-
-                               interrupt-parent = <&cpuintc>;
-                               interrupts = <6>;
-
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-
-                       rst: reset-controller@1806001c {
-                               compatible = "qca,ar9132-reset",
-                                               "qca,ar7100-reset";
-                               reg = <0x1806001c 0x4>;
-
-                               #reset-cells = <1>;
-                       };
-               };
-
-               usb: usb@1b000100 {
-                       compatible = "qca,ar7100-ehci", "generic-ehci";
-                       reg = <0x1b000100 0x100>;
-
-                       interrupts = <3>;
-                       resets = <&rst 5>;
-
-                       has-transaction-translator;
-
-                       phy-names = "usb";
-                       phys = <&usb_phy>;
-
-                       status = "disabled";
-               };
-
-               spi: spi@1f000000 {
-                       compatible = "qca,ar9132-spi", "qca,ar7100-spi";
-                       reg = <0x1f000000 0x10>;
-
-                       clocks = <&pll ATH79_CLK_AHB>;
-                       clock-names = "ahb";
-
-                       status = "disabled";
-
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-               };
-       };
-
-       usb_phy: usb-phy {
-               compatible = "qca,ar7200-usb-phy";
-
-               reset-names = "usb-phy", "usb-suspend-override";
-               resets = <&rst 4>, <&rst 3>;
-
-               #phy-cells = <0>;
-
-               status = "disabled";
-       };
-};