ath79: drop, its not ready for a release yet

[openwrt/staging/blogic.git] / target / linux / ath79 / dts / ar9331_dragino_ms14.dts

diff --git a/target/linux/ath79/dts/ar9331_dragino_ms14.dts b/target/linux/ath79/dts/ar9331_dragino_ms14.dts
deleted file mode 100644 (file)
index e7c446a..0000000
--- a/target/linux/ath79/dts/ar9331_dragino_ms14.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
-       model = "Dragino MS14 (Dragino 2)";
-       compatible = "dragino,ms14";
-
-       aliases {
-               serial0 = &uart;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               wlan {
-                       label = "dragino2:red:wlan";
-                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-
-               lan {
-                       label = "dragino2:red:lan";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wan {
-                       label = "dragino2:red:wan";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               system {
-                       label = "dragino2:red:system";
-                       gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               button@0 {
-                       label = "jumpstart";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
-
-               button@1 {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&ref {
-       clock-frequency = <25000000>;
-};
-
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
-&usb {
-       dr_mode = "host";
-       status = "okay";
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&spi {
-       num-chipselects = <1>;
-       status = "okay";
-
-       /* Winbond 25Q128BVFG SPI flash */
-       spiflash: w25q128@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "winbond,w25q128", "jedec,spi-nor";
-               spi-max-frequency = <104000000>;
-               reg = <0>;
-       };
-};