ath79: add support for Pisen WMM003N (Cloud Easy Power)

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9331_pisen_wmm003n.dts

diff --git a/target/linux/ath79/dts/ar9331_pisen_wmm003n.dts b/target/linux/ath79/dts/ar9331_pisen_wmm003n.dts
new file mode 100644 (file)
index 0000000..223eaa2
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_pisen_wmm003n.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+       model = "Pisen WMM003N";
+       compatible = "pisen,wmm003n", "qca,ar9331";
+
+       aliases {
+               serial0 = &uart;
+               led-status = &led_system;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               led_system: system {
+                       label = "pisen:blue:system";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       reg_usb_vbus: reg_usb_vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       firmware: partition@20000 {
+                               reg = <0x20000 0x7d0000>;
+                               label = "firmware";
+                       };
+
+                       art: partition@7f0000 {
+                               reg = <0x7f0000 0x10000>;
+                               label = "art";
+                               read-only;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       mtd-mac-address = <&uboot 0x1fc00>;
+
+       gmac-config {
+               device = <&gmac>;
+
+               switch-phy-addr-swap = <0>;
+               switch-phy-swap = <0>;
+       };
+};
+
+&eth1 {
+       status = "okay";
+       compatible = "syscon", "simple-mfd";
+};
+
+&gpio {
+       status = "okay";
+};
+
+&uart {
+       status = "okay";
+};
+
+&usb {
+       dr_mode = "host";
+       vbus-supply = <&reg_usb_vbus>;
+       status = "okay";
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&uboot 0x1fc00>;
+};