ath79: Forward port support for CR3000

[openwrt/staging/hauke.git] / target / linux / ath79 / dts / ar9341_pcs_cr3000.dts

diff --git a/target/linux/ath79/dts/ar9341_pcs_cr3000.dts b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts
new file mode 100644 (file)
index 0000000..48ec783
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9341.dtsi"
+
+/ {
+       model = "PowerCloud Systems CR3000";
+       compatible = "pcs,cr3000", "qca,ar9341";
+
+       aliases {
+               serial0 = &uart;
+               led-status = &status;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+                pinctrl-0 = <&jtag_disable_pins>;
+
+               reset {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "WPS button";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               status: power {
+                       label = "pcs:amber:power";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wlan2g {
+                       label = "pcs:blue:wlan";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wan {
+                       label = "pcs:blue:wan";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan1 {
+                       label = "pcs:blue:lan1";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan2 {
+                       label = "pcs:blue:lan2";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan3 {
+                       label = "pcs:blue:lan3";
+                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan4 {
+                       label = "pcs:blue:lan4";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+       };
+};
+
+&ref {
+       clock-frequency = <25000000>;
+};
+
+&uart {
+       status = "okay";
+};
+
+&gpio {
+       status = "okay";
+};
+
+&spi {
+       num-cs = <1>;
+
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x050000 0x07a0000>;
+                       };
+
+                       art: partition@7f0000 {
+                               label = "art";
+                               reg = <0x7f0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&art 0x1002>;
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy0>;
+       mtd-mac-address = <&art 0x0>;
+       mtd-mac-address-increment = <1>;
+
+};
+
+&eth1 {
+       status = "okay";
+
+       phy-handle = <&swphy4>;
+       mtd-mac-address = <&art 0x0>;
+       phy-mode = "gmii";
+       pll-data = <0x06000000 0x00000101 0x00001616>;
+
+       gmac-config {
+               device = <&gmac>;
+               switch-phy-swap = <1>;
+       };
+};