ath79: add support for Teltonika RUT955 H7V3C0

[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / ar9344.dtsi

diff --git a/target/linux/ath79/dts/ar9344.dtsi b/target/linux/ath79/dts/ar9344.dtsi
index 655ab35d79883e02650c506af8d3aefb3bc8d110..e99d962933b45c703920e2559daa905d57942981 100644 (file)
--- a/target/linux/ath79/dts/ar9344.dtsi
+++ b/target/linux/ath79/dts/ar9344.dtsi
@@ -6,7 +6,32 @@
        compatible = "qca,ar9344";
 };
 
-&apb {
+&cpuintc {
+       qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
+       qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
+                       <&ddr_ctrl 1>;
+};
+
+&rst {
+       intc2: interrupt-controller {
+               compatible = "qca,ar9340-intc";
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+
+               qca,int-status-addr = <0xac>;
+               qca,pending-bits = <0xf>,       /* wmac */
+                               <0x1f0>;        /* pcie rc1 */
+
+               qca,ddr-wb-channel-interrupts = <0>, <1>;
+               qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
+       };
+};
+
+&ahb {
        pcie: pcie-controller@180c0000 {
                compatible = "qcom,ar9340-pci", "qcom,ar7240-pci";
                #address-cells = <3>;
@@ -18,15 +43,23 @@
                reg-names = "crp_base", "ctrl_base", "cfg_base";
                ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
                                0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
-               interrupt-parent = <&cpuintc>;
-               interrupts = <2>;
+               interrupt-parent = <&intc2>;
+               interrupts = <1>;
+
+               resets = <&rst 6>, <&rst 7>;
+               reset-names = "hc", "phy";
 
                interrupt-controller;
                #interrupt-cells = <1>;
 
                interrupt-map-mask = <0 0 0 1>;
                interrupt-map = <0 0 0 0 &pcie 0>;
-               
+
                status = "disabled";
        };
 };
+
+&wmac {
+       interrupt-parent = <&intc2>;
+       interrupts = <0>;
+};