ath79: add AR934x NAND Flash Controller driver

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9344_tplink_tl-wdr4300.dtsi

diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
index 558a763747f8113664ca78fca06ce315aa047547..9ca96cc7cd0221b9fe49050bcb8a404d71abcfed 100644 (file)
--- a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
@@ -1,171 +1,67 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
+#include "ar9344_tplink_tl-wdrxxxx.dtsi"
 
 / {
-       model = "TP-Link WDR4300";
-       compatible = "tplink,tl-wdr4300";
-
        aliases {
-               led-status = &system;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb1 {
-                       label = "tp-link:green:usb1";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       trigger-sources = <&hub_port1>;
-                       linux,default-trigger = "usbport";
-               };
-
-               usb2 {
-                       label = "tp-link:green:usb2";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       trigger-sources = <&hub_port2>;
-                       linux,default-trigger = "usbport";
-               };
-
-               wlan2g {
-                       label = "tp-link:green:wlan2g";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               system: system {
-                       label = "tp-link:green:system";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               qss {
-                       label = "tp-link:green:qss";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
+               label-mac-device = &ath9k;
        };
+};
 
-       ath9k-leds {
-               compatible = "gpio-leds";
-
-               wlan5g {
-                       label = "tp-link:green:wlan5g";
-                       gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy1tpt";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               wifi {
-                       linux,code = <KEY_RFKILL>;
-                       linux,input-type = <EV_SW>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
+&leds {
+       usb1 {
+               label = "tp-link:green:usb1";
+               gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               trigger-sources = <&hub_port1>;
+               linux,default-trigger = "usbport";
        };
 
-       gpio-export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               gpio_usb1_power {
-                       gpio-export,name = "tp-link:power:usb1";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-               };
-
-               gpio_usb2_power {
-                       gpio-export,name = "tp-link:power:usb2";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
-               };
-
-               gpio_ext_lna0 {
-                       gpio-export,name = "tp-link:ext:lna0";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
-               };
-
-               gpio_ext_lna1 {
-                       gpio-export,name = "tp-link:ext:lna1";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-               };
+       usb2 {
+               label = "tp-link:green:usb2";
+               gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               trigger-sources = <&hub_port2>;
+               linux,default-trigger = "usbport";
        };
 };
 
-&ref {
-       clock-frequency = <40000000>;
-};
-
-&uart {
-       status = "okay";
-};
-
 &gpio {
-       status = "okay";
-};
+       lna0 {
+               gpio-hog;
+               gpios = <18 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "tp-link:ext:lna0";
+       };
 
-&spi {
-       num-cs = <1>;
+       lna1 {
+               gpio-hog;
+               gpios = <19 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "tp-link:ext:lna1";
+       };
 
-       status = "okay";
+       usb1_power {
+               gpio-hog;
+               gpios = <22 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "tp-link:power:usb1";
+       };
 
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       uboot: partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x020000 0x7d0000>;
-                       };
-
-                       art: partition@7f0000 {
-                               label = "art";
-                               reg = <0x7f0000 0x010000>;
-                               read-only;
-                       };
-               };
+       usb2_power {
+               gpio-hog;
+               gpios = <21 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "tp-link:power:usb2";
        };
 };
 
 &usb {
+       #address-cells = <1>;
+       #size-cells = <0>;
        status = "okay";
 
        port@1 {
+               #address-cells = <1>;
+               #size-cells = <0>;
                reg = <1>;
                #trigger-source-cells = <0>;
 
@@ -185,23 +81,11 @@
        status = "okay";
 };
 
-&pcie {
-       status = "okay";
-
-       ath9k: wifi@168c,0033 {
-               compatible = "pci168c,0033";
-               reg = <0x0000 0 0 0 0>;
-               mtd-mac-address = <&uboot 0x1fc00>;
-               qca,no-eeprom;
-               #gpio-cells = <2>;
-               gpio-controller;
-       };
+&ath9k {
+       mtd-mac-address = <&uboot 0x1fc00>;
 };
 
 &wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&uboot 0x1fc00>;
        mtd-mac-address-increment = <(-1)>;
 };