ath79: add support for WD My Net N600

[openwrt/staging/nbd.git] / target / linux / ath79 / dts / ar9344_wd_mynet-nxxx.dtsi

diff --git a/target/linux/ath79/dts/ar9344_wd_mynet-nxxx.dtsi b/target/linux/ath79/dts/ar9344_wd_mynet-nxxx.dtsi
new file mode 100644 (file)
index 0000000..73e2c25
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_wd_mynet-nxxx.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+};
+
+&ref {
+       clock-frequency = <40000000>;
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "bootloader";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "bdcfg";
+                               reg = <0x040000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "devdata";
+                               reg = <0x050000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "devconf";
+                               reg = <0x060000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               compatible = "seama";
+                               label = "firmware";
+                               reg = <0x070000 0xf80000>;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+
+       wifi@0,0 {
+               compatible = "pci168c,0033";
+               reg = <0x0000 0 0 0 0>;
+               qca,no-eeprom;
+       };
+};
+
+&wmac {
+       status = "okay";
+
+       qca,no-eeprom;
+};