ath79: add support for Winchannel WB2000

[openwrt/staging/hauke.git] / target / linux / ath79 / dts / ar9344_winchannel_wb2000.dts

diff --git a/target/linux/ath79/dts/ar9344_winchannel_wb2000.dts b/target/linux/ath79/dts/ar9344_winchannel_wb2000.dts
new file mode 100644 (file)
index 0000000..6a8ad70
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_winchannel_wb2000.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+       model = "Winchannel WB2000";
+       compatible = "winchannel,wb2000", "qca,ar9344";
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       aliases {
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
+       };
+
+       i2c {
+               compatible = "i2c-gpio";
+               gpios = <&gpio 17 GPIO_ACTIVE_HIGH
+                        &gpio 16 GPIO_ACTIVE_HIGH
+                       >;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               rtc@68 {
+                       compatible = "dallas,ds1339";
+                       reg = <0x68>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wlan2g {
+                       label = "wb2000:green:2g";
+                       gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               usb {
+                       label = "wb2000:green:usb";
+                       gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+                       trigger-sources = <&hub_port1>, <&hub_port2>;
+                       linux,default-trigger = "usbport";
+               };
+
+               led_system: system {
+                       label = "wb2000:green:system";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <50>;
+
+               reset {
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       ath9k-leds {
+               compatible = "gpio-leds";
+
+               wlan {
+                       label = "wb2000:green:5g";
+                       gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
+};
+
+&ref {
+       clock-frequency = <40000000>;
+};
+
+&uart {
+       status = "okay";
+};
+
+&spi {
+       num-cs = <1>;
+
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xf80000>;
+                               compatible = "denx,uimage";
+                       };
+
+                       partition@fd0000 {
+                               label = "nvram";
+                               reg = <0xfd0000 0x10000>;
+                               read-only;
+                       };
+
+                       art: partition@fe0000 {
+                               label = "art";
+                               reg = <0xfe0000 0x10000>;
+                               read-only;
+                       };
+
+                       addr: partition@ff0000 {
+                               label = "addr";
+                               reg = <0xff0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k: wifi@0,0 {
+               compatible = "pci168c,0030";
+               reg = <0x0000 0 0 0 0>;
+               qca,no-eeprom;
+               mtd-mac-address = <&addr 0x0>;
+               mtd-mac-address-increment = <0x10>;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+};
+
+&usb {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       port@1 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+               #trigger-source-cells = <0>;
+
+               hub_port1: port@1 {
+                       reg = <1>;
+                       #trigger-source-cells = <0>;
+               };
+
+               hub_port2: port@2 {
+                       reg = <2>;
+                       #trigger-source-cells = <0>;
+               };
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&addr 0x0>;
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0x10>;
+
+       phy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       pll-data = <0xe000000 0x04000101 0x04001313>;
+
+       mtd-mac-address = <&addr 0x0>;
+       mtd-mac-address-increment = <0x21>;
+
+       phy-mode = "rgmii-rxid";
+       phy-handle = <&phy4>;
+
+       gmac-config {
+               device = <&gmac>;
+               rgmii-gmac0 = <1>;
+               rxd-delay = <1>;
+               rxdv-delay = <1>;
+       };
+};