+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qca953x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ubnt,acb-isp", "qca,qca9533";
- model = "Ubiquiti airCube ISP";
-
- aliases {
- label-mac-device = &wmac;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x050000 0xf60000>;
- };
-
- partition@fb0000 {
- label = "cfg";
- reg = <0xfb0000 0x040000>;
- read-only;
- };
-
- art: partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&swphy4>;
-
- mtd-mac-address = <&art 0x0>;
-};
-
-ð1 {
- mtd-mac-address = <&art 0x6>;
-
- gmac-config {
- device = <&gmac>;
- };
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
-};