ath79: add support for Araknis AN-700-AP-I-AC

[openwrt/staging/hauke.git] / target / linux / ath79 / dts / qca9558_araknis_an-700-ap-i-ac.dts

diff --git a/target/linux/ath79/dts/qca9558_araknis_an-700-ap-i-ac.dts b/target/linux/ath79/dts/qca9558_araknis_an-700-ap-i-ac.dts
new file mode 100644 (file)
index 0000000..304eac5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_araknis_an-700-ap-i-ac.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_senao_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "araknis,an-700-ap-i-ac", "qca,qca9558";
+       model = "Araknis AN-700-AP-I-AC";
+
+       aliases {
+               label-mac-device = &eth0;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "amber:power";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               wifi2g {
+                       label = "blue:wifi2g";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               wifi5g {
+                       label = "blue:wifi5g";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wps {
+                       label = "blue:wps";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&partitions {
+       art: partition@ff0000 {
+               label = "art";
+               reg = <0xff0000 0x010000>;
+               read-only;
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy5: ethernet-phy@5 {
+               reg = <5>;
+               eee-broken-100tx;
+               eee-broken-1000t;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
+
+       phy-handle = <&phy5>;
+       phy-mode = "rgmii-id";
+
+       pll-data = <0x82000000 0x80000101 0x80001313>;
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
+};
+
+&art {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_art_0: macaddr@0 {
+               reg = <0x0 0x6>;
+       };
+};