ath79: drop, its not ready for a release yet

[openwrt/staging/blogic.git] / target / linux / ath79 / dts / qca9558_om5p_ac.dts

diff --git a/target/linux/ath79/dts/qca9558_om5p_ac.dts b/target/linux/ath79/dts/qca9558_om5p_ac.dts
deleted file mode 100644 (file)
index 974b1c6..0000000
--- a/target/linux/ath79/dts/qca9558_om5p_ac.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9557.dtsi"
-
-/ {
-       compatible = "openmesh,om5p-ac-v2", "qca,qca9557";
-       model = "OpenMesh OM5P-AC V2";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x8000000>;
-       };
-
-       extosc: ref {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-output-names = "ref";
-               clock-frequency = <40000000>;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power {
-                       label = "om5pac:blue:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wifi_green {
-                       label = "om5pac:green:wifi";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wifi_yellow {
-                       label = "om5pac:yellow:wifi";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wifi_red {
-                       label = "om5pac:red:wifi";
-                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               button@0 {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio-export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               gpio_pa_dcdc {
-                       gpio-export,name = "om5pac:pa_dcdc";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
-               };
-               gpio_pa_high {
-                       gpio-export,name = "om5pac:pa_high";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&pinmux {
-       pinmux_pa_dcdc_pins {
-               pinctrl-single,bits = <0x0 0xff00 0x0>;
-       };
-
-       pinmux_pa_high_pins {
-               pinctrl-single,bits = <0x10 0xff 0x0>;
-       };
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&pll {
-       clocks = <&extosc>;
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "mx25l12805d";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@1 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@2 {
-                               label = "firmware";
-                               reg = <0x850000 0x7a0000>;
-                       };
-
-                       partition@3 {
-                               label = "ART";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy4: ethernet-phy@4 {
-               reg = <4>;
-               phy-mode = "rgmii-id";
-       };
-};
-
-&mdio1 {
-       status = "okay";
-
-       phy1: ethernet-phy@1 {
-               reg = <1>;
-               phy-mode = "sgmii";
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       phy-handle = <&phy4>;
-       phy-mode = "rgmii";
-};
-
-&eth1 {
-       status = "okay";
-
-       phy-handle = <&phy1>;
-       phy-mode = "sgmii";
-};