treewide: convert mtd-mac-address-increment* to generic implementation

[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / qca9561_tplink_archer-c5x.dtsi

diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi b/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
index 6d32fa3fc4eff64a1c6e58322d69cf2cf2fdd251..673805e132b7d41ec041906bbbbfbc6ca37c1d09 100644 (file)
--- a/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
@@ -1,15 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include "qca956x.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca956x.dtsi"
-
 / {
        compatible = "tplink,archer-c5x", "qca,qca9560";
 
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+               label-mac-device = &eth1;
        };
 
        led_spi {
@@ -32,23 +36,64 @@
                };
        };
 
+       leds: leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "green:power";
+                       gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wlan2g {
+                       label = "green:wlan2g";
+                       gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               wlan5g {
+                       label = "green:wlan5g";
+                       gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wan_green {
+                       label = "green:wan";
+                       gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               wan_amber {
+                       label = "amber:wan";
+                       gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+               };
+
+               lan {
+                       label = "green:lan";
+                       gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "green:wps";
+                       gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+               };
+       };
+
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
+               compatible = "gpio-keys";
 
-               wps_button {
+               wps {
                        label = "WPS button";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                };
 
-               wifi_button {
+               wifi {
                        label = "WiFi button";
                        linux,code = <KEY_RFKILL>;
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };
 
-               reset_button {
+               reset {
                        label = "Reset button";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
@@ -69,26 +114,21 @@
                        gpio-export,output = <1>;
                        gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
                };
-
        };
 };
 
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
 &pcie {
        status = "okay";
 };
 
 &eth0 {
-       phy-mode = "mii";
+       status = "okay";
+
        phy-handle = <&swphy0>;
 
+       mtd-mac-address = <&info 0x8>;
+       mac-address-increment = <1>;
+
        gmac-config {
                device = <&gmac>;
 
@@ -96,3 +136,16 @@
                switch-phy-swap = <1>;
        };
 };
+
+&eth1 {
+       status = "okay";
+
+       mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&info 0x8>;
+};