ath79: add support for ASUS PL-AC56

[openwrt/staging/hauke.git] / target / linux / ath79 / dts / qca9563_asus_pl-ac56.dts

diff --git a/target/linux/ath79/dts/qca9563_asus_pl-ac56.dts b/target/linux/ath79/dts/qca9563_asus_pl-ac56.dts
new file mode 100644 (file)
index 0000000..c597b56
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_asus_pl-ac56.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ASUS PL-AC56";
+       compatible = "asus,pl-ac56", "qca,qca9563";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-upgrade = &led_power;
+               label-mac-device = &eth0;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       linux,code = <BTN_0>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "red:power";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               lan {
+                       label = "green:lan";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan2g {
+                       label = "green:wlan2g";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan5g {
+                       label = "green:wlan5g";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x10000>;
+                               read-only;
+                       };
+
+                       art: partition@50000 {
+                               label = "art";
+                               reg = <0x050000 0x10000>;
+                               read-only;
+
+                               compatible = "nvmem-cells";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               macaddr_art_1002: macaddr@1002 {
+                                       reg = <0x1002 0x6>;
+                               };
+                       };
+
+                       partition@60000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x060000 0xf20000>;
+                       };
+
+                       partition@f80000 {
+                               label = "plc";
+                               reg = <0xf80000 0x80000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0>;
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "sgmii";
+               qca,mib-poll-interval = <500>;
+
+               qca,ar8327-initvals = <
+                       0x04 0x80000080 /* AR8327_REG_PAD0_MODE */
+                       0x08 0x01000000 /* AR8327_REG_PAD5_MODE */
+                       0x0c 0x07500000 /* AR8327_REG_PAD6_MODE */
+                       0x10 0x602613a0 /* AR8327_REG_POWER_ON_STRAP */
+                       0x50 0xcc35cc35 /* AR8327_REG_LED_CTRL0 */
+                       0x54 0xca35ca35 /* AR8327_REG_LED_CTRL1 */
+                       0x58 0xc935c935 /* AR8327_REG_LED_CTRL2 */
+                       0x5c 0x03ffff00 /* AR8327_REG_LED_CTRL3 */
+                       0x7c 0x0000007e /* AR8327_REG_PORT_STATUS(0) */
+                       0x94 0x0000007e /* AR8327_REG_PORT_STATUS(6) */
+               >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-mode = "sgmii";
+       nvmem-cells = <&macaddr_art_1002>;
+       nvmem-cell-names = "mac-address";
+       phy-handle = <&phy0>;
+};
+
+&wmac {
+       status = "okay";
+
+       qca,no-eeprom;
+};