ath79: add support for COMFAST CF-E375AC

[openwrt/staging/hauke.git] / target / linux / ath79 / dts / qca9563_comfast_cf-e375ac.dts

diff --git a/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts b/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts
new file mode 100644 (file)
index 0000000..1eeb02f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "COMFAST CF-E375AC";
+       compatible = "comfast,cf-e375ac", "qca,qca9563";
+
+       aliases {
+               label-mac-device = &eth0;
+               led-boot = &led_lan;
+               led-failsafe = &led_lan;
+               led-running = &led_lan;
+               led-upgrade = &led_lan;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_lan: lan {
+                       label = "green:lan";
+                       gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+               };
+
+               wan {
+                       label = "red:wan";
+                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+               };
+
+               wlan2g {
+                       label = "blue:wlan2g";
+                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       watchdog {
+               compatible = "linux,wdt-gpio";
+
+               gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+               hw_algo = "toggle";
+               hw_margin_ms = <500>;
+               always-running;
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       art: partition@40000 {
+                               label = "art";
+                               reg = <0x040000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x050000 0xfa0000>;
+                       };
+
+                       partition@ff0000 {
+                               label = "art-backup";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0>;
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "sgmii";
+               qca,mib-poll-interval = <500>;
+
+               qca,ar8327-initvals = <
+                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+               >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       pll-data = <0x03000101 0x00000101 0x00001919>;
+
+       phy-mode = "sgmii";
+       mtd-mac-address = <&art 0x0>;
+       phy-handle = <&phy0>;
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&art 0x0>;
+       mtd-mac-address-increment = <10>;
+};