ath79: add support for ELECOM WRC-300GHBK2-I

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_elecom_wrc-300ghbk2-i.dts

diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
new file mode 100644 (file)
index 0000000..7052795
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+       model = "ELECOM WRC-300GHBK2-I";
+       compatible = "elecom,wrc-300ghbk2-i", "qca,qca9563";
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power: power {
+                       label = "wrc-300ghbk2-i:white:power";
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               wlan2g {
+                       label = "wrc-300ghbk2-i:white:wlan2g";
+                       gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wps {
+                       label = "wrc-300ghbk2-i:red:wps";
+                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               button_wps {
+                       label = "wps";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               ap {
+                       label = "ap";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "nvram";
+                               reg = <0x050000 0x020000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               label = "firmware";
+                               reg = <0x070000 0x770000>;
+                       };
+
+                       partition@7e0000 {
+                               label = "hwconfig";
+                               reg = <0x7e0000 0x010000>;
+                               read-only;
+                       };
+
+                       ART: partition@7f0000 {
+                               label = "ART";
+                               reg = <0x7f0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "sgmii";
+
+               qca,ar8327-initvals = <
+                       0x04 0x00000080 /* PORT0 PAD MODE CTRL */
+                       0x50 0xcf37cf37 /* LED_CTRL0 */
+                       0x54 0x00000000 /* LED_CTRL1 */
+                       0x58 0x00000000 /* LED_CTRL2 */
+                       0x5c 0x03ffff00 /* LED_CTRL3 */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+               >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       mtd-mac-address = <&ART 0x1002>;
+       mtd-mac-address-increment = <(-1)>;
+       phy-mode = "sgmii";
+       phy-handle = <&phy0>;
+};
+
+&uart {
+       status = "okay";
+};
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&ART 0x1000>;
+};