ath79: add support for TP-Link Archer C6 v2

[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / qca9563_tplink_archer-x6-v2.dtsi

diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi b/target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi
new file mode 100644 (file)
index 0000000..37ab164
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power: power {
+                       label = "tp-link:green:power";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wlan2g {
+                       label = "tp-link:green:wlan2g";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               wlan5g {
+                       label = "tp-link:green:wlan5g";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               lan {
+                       label = "tp-link:green:lan";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "tp-link:green:wan";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+
+               wan_fail {
+                       label = "tp-link:amber:wan";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "tp-link:green:wps";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "WPS button";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&uart {
+       status = "okay";
+};
+
+&gpio {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x020000>;
+                               read-only;
+                       };
+
+                       mac: partition@20000 {
+                               label = "mac";
+                               reg = <0x020000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x030000 0x7a0000>;
+                       };
+
+                       partition@7d0000 {
+                               label = "tplink";
+                               reg = <0x7d0000 0x020000>;
+                               read-only;
+                       };
+
+                       art: partition@7f0000 {
+                               label = "art";
+                               reg = <0x7f0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0>;
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "sgmii";
+
+               qca,ar8327-initvals = <
+                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+                       >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-mode = "sgmii";
+       mtd-mac-address = <&mac 0x8>;
+       phy-handle = <&phy0>;
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&mac 0x8>;
+};