ath79: add support for Senao Watchguard AP100

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 0802b8345f792921a17ebe48d48b5a9ea2b7457d..606a194f7eb7baa9eca816d82df8b4cec7121416 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -40,7 +40,10 @@ alfa-network,n5q)
        ucidef_set_led_rssi "signal3" "SIGNAL3" "green:signal3" "wlan0" "50" "100"
        ucidef_set_led_rssi "signal4" "SIGNAL4" "green:signal4" "wlan0" "75" "100"
        ;;
-alfa-network,pi-wifi4)
+alfa-network,pi-wifi4|\
+watchguard,ap100|\
+watchguard,ap200|\
+watchguard,ap300)
        ucidef_set_led_netdev "lan_data" "LAN_DATA" "orange:lan_data" "eth0" "tx rx"
        ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan_link" "eth0" "link"
        ;;
@@ -61,6 +64,11 @@ asus,pl-ac56)
        ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan2g" "wlan1" "link"
        ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan5g" "wlan0" "link"
        ;;
+asus,rp-ac51)
+       ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
+       ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2G" "wlan1" "link"
+       ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5G" "wlan0" "link"
+       ;;
 asus,rp-ac66)
        ucidef_set_rssimon "wlan0" "200000" "1"
        ucidef_set_rssimon "wlan1" "200000" "1"
@@ -319,6 +327,9 @@ qca,ap143-16m)
 qihoo,c301)
        ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
        ;;
+ruckus,zf7372)
+       ucidef_set_led_switch "lan" "LAN" "green:eth1" "switch0" "0x02"
+       ;;
 samsung,wam250)
        ucidef_set_led_netdev "lan" "LAN" "white:lan" "eth0"
        ;;
@@ -479,6 +490,9 @@ zbtlink,zbt-wd323)
        ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10"
        ucidef_set_led_switch "lan2" "LAN2" "orange:lan2" "switch0" "0x08"
        ;;
+zyxel,nwa1100-nh)
+       ucidef_set_led_netdev "lan_data" "LAN_DATA" "amber:lan" "eth0" "tx rx"
+       ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan" "eth0" "link"
 esac
 
 board_config_flush