ath79: add support for Senao Watchguard AP100

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index e22cee51a3e54d875b586c66be983377fffaa743..606a194f7eb7baa9eca816d82df8b4cec7121416 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -40,7 +40,10 @@ alfa-network,n5q)
        ucidef_set_led_rssi "signal3" "SIGNAL3" "green:signal3" "wlan0" "50" "100"
        ucidef_set_led_rssi "signal4" "SIGNAL4" "green:signal4" "wlan0" "75" "100"
        ;;
-alfa-network,pi-wifi4)
+alfa-network,pi-wifi4|\
+watchguard,ap100|\
+watchguard,ap200|\
+watchguard,ap300)
        ucidef_set_led_netdev "lan_data" "LAN_DATA" "orange:lan_data" "eth0" "tx rx"
        ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan_link" "eth0" "link"
        ;;
@@ -56,6 +59,16 @@ alfa-network,tube-2hq)
        ucidef_set_led_rssi "signal3" "SIGNAL3" "green:signal3" "wlan0" "50" "100"
        ucidef_set_led_rssi "signal4" "SIGNAL4" "green:signal4" "wlan0" "75" "100"
        ;;
+asus,pl-ac56)
+       ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3e"
+       ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan2g" "wlan1" "link"
+       ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan5g" "wlan0" "link"
+       ;;
+asus,rp-ac51)
+       ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
+       ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2G" "wlan1" "link"
+       ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5G" "wlan0" "link"
+       ;;
 asus,rp-ac66)
        ucidef_set_rssimon "wlan0" "200000" "1"
        ucidef_set_rssimon "wlan1" "200000" "1"
@@ -246,9 +259,14 @@ glinet,gl-x750)
 hak5,lan-turtle)
        ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1"
        ;;
-joyit,jt-or750i)
+joyit,jt-or750i|\
+yuncore,xd3200)
        ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0"
        ;;
+hiwifi,hc6361)
+       ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+       ucidef_set_led_wlan "wlan" "WLAN" "blue:wlan" "phy0tpt"
+       ;;
 meraki,mr12|\
 tplink,cpe210-v2|\
 tplink,cpe210-v3)
@@ -309,6 +327,9 @@ qca,ap143-16m)
 qihoo,c301)
        ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
        ;;
+ruckus,zf7372)
+       ucidef_set_led_switch "lan" "LAN" "green:eth1" "switch0" "0x02"
+       ;;
 samsung,wam250)
        ucidef_set_led_netdev "lan" "LAN" "white:lan" "eth0"
        ;;
@@ -431,19 +452,11 @@ ubnt,powerbeam-5ac-gen2)
        ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "blue:rssi2" "wlan0" "51" "100"
        ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "blue:rssi3" "wlan0" "76" "100"
        ;;
-ubnt,bullet-m-ar7240|\
-ubnt,bullet-m-ar7241|\
 ubnt,bullet-m-xw|\
-ubnt,nanobridge-m|\
-ubnt,nanostation-loco-m|\
 ubnt,nanostation-loco-m-xw|\
-ubnt,nanostation-m|\
 ubnt,nanostation-m-xw|\
-ubnt,picostation-m|\
 ubnt,powerbeam-m2-xw|\
-ubnt,powerbeam-m5-xw|\
-ubnt,powerbridge-m|\
-ubnt,rocket-m)
+ubnt,powerbeam-m5-xw)
        ucidef_set_rssimon "wlan0" "200000" "1"
        ucidef_set_led_rssi "rssilow" "RSSILOW" "red:link1" "wlan0" "1" "100"
        ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "orange:link2" "wlan0" "26" "100"
@@ -477,6 +490,9 @@ zbtlink,zbt-wd323)
        ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10"
        ucidef_set_led_switch "lan2" "LAN2" "orange:lan2" "switch0" "0x08"
        ;;
+zyxel,nwa1100-nh)
+       ucidef_set_led_netdev "lan_data" "LAN_DATA" "amber:lan" "eth0" "tx rx"
+       ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan" "eth0" "link"
 esac
 
 board_config_flush