ath79: add support for OpenMesh OM2P-HS v2

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index c812f283af0d6bd058c764685edbe5aa5d2e1ed9..8926ffc0c8c1ecd871b240a84f9a0f120f506d53 100755 (executable)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -40,6 +40,10 @@ alfa-network,n5q)
        ucidef_set_led_rssi "signal3" "SIGNAL3" "green:signal3" "wlan0" "50" "100"
        ucidef_set_led_rssi "signal4" "SIGNAL4" "green:signal4" "wlan0" "75" "100"
        ;;
+alfa-network,pi-wifi4)
+       ucidef_set_led_netdev "lan_data" "LAN_DATA" "orange:lan_data" "eth0" "tx rx"
+       ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan_link" "eth0" "link"
+       ;;
 alfa-network,r36a)
        ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
        ucidef_set_led_switch "wan" "WAN" "blue:wan" "switch0" "0x10"
@@ -141,12 +145,14 @@ comfast,cf-e560ac)
        ucidef_set_led_switch "lan4" "LAN4" "blue:lan4" "switch0" "0x10"
        ;;
 comfast,cf-ew72|\
+openmesh,om2p-hs-v1|\
+openmesh,om2p-hs-v2|\
 telco,t1)
        ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02"
        ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
        ;;
 comfast,cf-wr752ac-v1|\
-engenius,ecb1750|\
+engenius,eap300-v2|\
 enterasys,ws-ap3705i)
        ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
        ;;
@@ -180,7 +186,8 @@ engenius,enh202-v1)
        ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100"
        ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "67" "100"
        ;;
-engenius,ens202ext-v1)
+engenius,ens202ext-v1|\
+engenius,enstationac-v1)
        ucidef_set_rssimon "wlan0" "200000" "1"
        ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan0" "1"  "100"
        ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100"
@@ -194,7 +201,13 @@ etactica,eg200)
        ucidef_set_led_netdev "lan" "LAN" "red:eth0" "eth0"
        ucidef_set_led_oneshot "modbus" "Modbus" "red:modbus" "100" "33"
        ;;
-glinet,gl-mifi)
+glinet,gl-mifi|\
+qxwlan,e600g-v2-8m|\
+qxwlan,e600g-v2-16m|\
+qxwlan,e600gac-v2-8m|\
+qxwlan,e600gac-v2-16m|\
+qxwlan,e750a-v4-8m|\
+qxwlan,e750a-v4-16m)
        ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x02"
        ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
        ;;
@@ -219,6 +232,11 @@ netgear,wnr2200-16m)
        ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "amber:lan3" "switch0" "0x08" "0x02"
        ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "amber:lan4" "switch0" "0x10" "0x02"
        ;;
+openmesh,om2p-v4|\
+openmesh,om2p-hs-v4)
+       ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0"
+       ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02"
+       ;;
 pcs,cr3000)
        ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
        ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x04"
@@ -323,8 +341,8 @@ tplink,tl-mr6400-v1)
        ucidef_set_led_netdev "4g" "4G" "white:4g" "usb0"
        ;;
 tplink,tl-wpa8630-v1|\
-tplink,tl-wpa8630p-v2-eu|\
 tplink,tl-wpa8630p-v2-int|\
+tplink,tl-wpa8630p-v2.0-eu|\
 tplink,tl-wpa8630p-v2.1-eu)
        ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c"
        ;;
@@ -356,6 +374,7 @@ ubnt,rocket-m)
        ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "76" "100"
        ;;
 ubnt,nanobeam-ac|\
+ubnt,nanobeam-ac-gen2|\
 ubnt,nanostation-ac|\
 ubnt,powerbeam-5ac-gen2)
        ucidef_set_rssimon "wlan0" "200000" "1"