ath79: add support for Senao Engenius ENH202 v1

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 1dff5acc38f53c2749124159263f7a0e8f695a85..decbb350963d54020983197a9c2ff0d2121c15e5 100755 (executable)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -106,7 +106,8 @@ comfast,cf-e560ac)
        ucidef_set_led_switch "lan3" "LAN3" "$boardname:blue:lan3" "switch0" "0x08"
        ucidef_set_led_switch "lan4" "LAN4" "$boardname:blue:lan4" "switch0" "0x10"
        ;;
-comfast,cf-ew72)
+comfast,cf-ew72|\
+telco,t1)
        ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
        ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
        ;;
@@ -143,6 +144,20 @@ dlink,dap-1365-a1)
 dlink,dir-859-a1)
        ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
        ;;
+engenius,enh202-v1)
+       ucidef_set_led_switch "lan" "LAN" "$boardname:amber:lan" "switch0" "0x10"
+       ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+       ucidef_set_rssimon "wlan0" "200000" "1"
+       ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1"  "100"
+       ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:amber:rssimedium" "wlan0" "33" "100"
+       ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "67" "100"
+       ;;
+engenius,ens202ext-v1)
+       ucidef_set_rssimon "wlan0" "200000" "1"
+       ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1"  "100"
+       ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:amber:rssimedium" "wlan0" "33" "100"
+       ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "67" "100"
+       ;;
 engenius,ews511ap)
        ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth1"
        ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth0"
@@ -168,6 +183,9 @@ glinet,gl-mifi)
 glinet,gl-x750)
        ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
        ;;
+meraki,mr16)
+       ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+       ;;
 netgear,wnr2200-8m|\
 netgear,wnr2200-16m)
        ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
@@ -296,6 +314,7 @@ tplink,tl-mr6400-v1)
        ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
        ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
        ;;
+tplink,tl-wpa8630-v1|\
 tplink,tl-wpa8630p-v2-eu|\
 tplink,tl-wpa8630p-v2-int)
        ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3c"