ath79: add support for Yuncore XD3200

[openwrt/staging/chunkeey.git] / target / linux / ath79 / generic / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index e2c6f9feac1950f611ceb2dd9c50ba50d8c4a412..03e6434422b09bb37a4e4d7aae4ec210cc456948 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -13,8 +13,13 @@ ath79_setup_interfaces()
        allnet,all-wap02860ac|\
        alfa-network,ap121f|\
        alfa-network,pi-wifi4|\
+       alfa-network,tube-2hq|\
+       araknis,an-300-ap-i-n|\
+       araknis,an-500-ap-i-ac|\
+       araknis,an-700-ap-i-ac|\
        arduino,yun|\
        aruba,ap-105|\
+       asus,rp-ac66|\
        avm,fritz1750e|\
        avm,fritz300e|\
        avm,fritzdvbc|\
@@ -43,6 +48,7 @@ ath79_setup_interfaces()
        meraki,mr16|\
        netgear,ex6400|\
        netgear,ex7300|\
+       netgear,ex7300-v2|\
        ocedo,koala|\
        ocedo,raccoon|\
        onion,omega|\
@@ -63,7 +69,9 @@ ath79_setup_interfaces()
        tplink,cpe510-v3|\
        tplink,cpe610-v1|\
        tplink,cpe610-v2|\
+       tplink,cpe710-v1|\
        tplink,eap225-outdoor-v1|\
+       tplink,eap225-v1|\
        tplink,eap225-v3|\
        tplink,eap245-v1|\
        tplink,re350k-v1|\
@@ -81,6 +89,7 @@ ath79_setup_interfaces()
        ubnt,lap-120|\
        ubnt,litebeam-ac-gen2|\
        ubnt,nanobeam-ac|\
+       ubnt,nanobeam-ac-xc|\
        ubnt,nanobridge-m|\
        ubnt,nanostation-ac-loco|\
        ubnt,nanostation-loco-m|\
@@ -128,7 +137,8 @@ ath79_setup_interfaces()
        pcs,cr3000|\
        tplink,archer-c58-v1|\
        tplink,archer-c59-v1|\
-       tplink,archer-c59-v2)
+       tplink,archer-c59-v2|\
+       wd,mynet-n600)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
@@ -184,6 +194,7 @@ ath79_setup_interfaces()
        compex,wpj531-16m|\
        openmesh,a40|\
        openmesh,a60|\
+       openmesh,om2p-v1|\
        openmesh,om2p-v4|\
        openmesh,om2p-hs-v4|\
        plasmacloud,pa300|\
@@ -264,6 +275,10 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
                ;;
+       embeddedwireless,balin)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "5:lan:1" "4:lan:2" "3:wan"
+               ;;
        embeddedwireless,dorin)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
@@ -300,11 +315,20 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
                ;;
+       jjplus,jwap230)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "5:wan:1" "1:lan:2" "6@eth1"
+               ;;
        joyit,jt-or750i)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
+       letv,lba-047-ch)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "3:lan:2" "4:lan:1"
+               ;;
        librerouter,librerouter-v1)
                ucidef_add_switch "switch0" \
                        "0@eth0" "5:wan" "6@eth1" "4:lan"
@@ -316,6 +340,7 @@ ath79_setup_interfaces()
                ;;
        mercury,mw4530r-v1|\
        tplink,archer-a7-v5|\
+       tplink,archer-a9-v6|\
        tplink,archer-c6-v2|\
        tplink,archer-c6-v2-us|\
        tplink,archer-c7-v4|\
@@ -340,6 +365,7 @@ ath79_setup_interfaces()
        ubnt,nanobeam-ac-gen2|\
        ubnt,nanostation-ac|\
        yuncore,a782|\
+       yuncore,xd3200|\
        yuncore,xd4200)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:wan"
@@ -415,14 +441,12 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
                ;;
-       tplink,tl-wpa8630-v1|\
-       tplink,tl-wpa8630p-v2-int|\
-       tplink,tl-wpa8630p-v2.0-eu|\
-       tplink,tl-wpa8630p-v2.1-eu)
+       tplink,tl-wpa8630-v1)
                # port 5 (internal) is the power-line port
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
                ;;
+       tplink,tl-wr841hp-v2|\
        tplink,tl-wr842n-v2|\
        tplink,tl-wr941hp-v1)
                ucidef_set_interface_wan "eth1"
@@ -508,6 +532,7 @@ ath79_setup_macs()
        alfa-network,n5q|\
        alfa-network,pi-wifi4|\
        alfa-network,r36a|\
+       alfa-network,tube-2hq|\
        engenius,eap300-v2|\
        engenius,ens202ext-v1)
                label_mac=$(mtd_get_mac_binary art 0x1002)
@@ -580,6 +605,7 @@ ath79_setup_macs()
                ;;
        dlink,dir-859-a1|\
        qihoo,c301|\
+       wd,mynet-n600|\
        wd,mynet-n750)
                lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
                wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
@@ -667,6 +693,7 @@ ath79_setup_macs()
                label_mac=$lan_mac
                ;;
        tplink,archer-a7-v5|\
+       tplink,archer-a9-v6|\
        tplink,archer-c7-v4|\
        tplink,archer-c7-v5|\
        tplink,tl-wr1043nd-v4|\
@@ -693,6 +720,7 @@ ath79_setup_macs()
                ;;
        ubnt,litebeam-ac-gen2|\
        ubnt,nanobeam-ac-gen2|\
+       ubnt,nanobeam-ac-xc|\
        ubnt,powerbeam-5ac-500|\
        ubnt,powerbeam-5ac-gen2)
                label_mac=$(mtd_get_mac_binary art 0x5006)