ath79: add support for WD My Net N600

[openwrt/staging/wigyori.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 10-ath9k-eeprom

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 2573f66f4acaed81187fa3d6b1158a208d4d7d2a..219e618cb9ce57241a5203ff38fda60674ad8065 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -9,8 +9,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
        case $board in
-       8dev,lima|\
-       ubnt,unifi)
+       8dev,lima)
                caldata_extract "art" 0x1000 0x800
                ;;
        avm,fritz1750e|\
@@ -19,10 +18,6 @@ case "$FIRMWARE" in
        avm,fritzdvbc)
                caldata_extract_reverse "urlader" 0x1541 0x440
                ;;
-       dlink,dap-2695-a1)
-               caldata_extract "art" 0x1000 0x440
-               ath9k_patch_mac $(mtd_get_mac_ascii bdcfg "wlanmac")
-               ;;
        dlink,dir-505|\
        dlink,dir-825-c1|\
        dlink,dir-835-a1)
@@ -33,14 +28,17 @@ case "$FIRMWARE" in
        dlink,dir-842-c2|\
        dlink,dir-842-c3|\
        dlink,dir-859-a1|\
+       nec,wf1200cr|\
        nec,wg1200cr|\
+       wd,mynet-n600|\
        wd,mynet-n750)
                caldata_extract "art" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
                ;;
+       engenius,ecb1200|\
        engenius,ecb1750)
                caldata_extract "art" 0x1000 0x440
-               ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1)
+               ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env athaddr) 1)
                ;;
        engenius,epg5000|\
        iodata,wn-ac1167dgr|\
@@ -71,13 +69,30 @@ case "$FIRMWARE" in
        ;;
 "ath9k-eeprom-pci-0000:00:00.0.bin")
        case $board in
+       atheros,db120|\
+       engenius,eap600|\
+       engenius,ecb600|\
+       mercury,mw4530r-v1|\
+       ocedo,raccoon|\
+       tplink,tl-wdr3500-v1|\
+       tplink,tl-wdr3600-v1|\
+       tplink,tl-wdr4300-v1|\
+       tplink,tl-wdr4300-v1-il|\
+       tplink,tl-wdr4310-v1|\
+       tplink,tl-wdr4900-v2|\
+       ubnt,unifi-ap-pro|\
+       winchannel,wb2000)
+               caldata_extract "art" 0x5000 0x440
+               ;;
        avm,fritz300e)
                caldata_extract_reverse "urloader" 0x1541 0x440
                ;;
-       buffalo,wzr-hp-g302h-a1a0)
+       buffalo,wzr-hp-g302h-a1a0|\
+       ubnt,unifi-ap-outdoor-plus)
                caldata_extract "art" 0x1000 0xeb8
                ;;
-       buffalo,wzr-hp-g450h)
+       buffalo,wzr-hp-g450h|\
+       ubnt,unifi)
                caldata_extract "art" 0x1000 0x440
                ;;
        dlink,dir-825-c1|\
@@ -89,15 +104,8 @@ case "$FIRMWARE" in
                caldata_extract "calibrate" 0x5000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0)
                ;;
-       ocedo,raccoon|\
-       tplink,tl-wdr3500-v1|\
-       tplink,tl-wdr3600-v1|\
-       tplink,tl-wdr4300-v1|\
-       tplink,tl-wdr4300-v1-il|\
-       tplink,tl-wdr4310-v1|\
-       tplink,tl-wdr4900-v2|\
-       winchannel,wb2000)
-               caldata_extract "art" 0x5000 0x440
+       meraki,mr12)
+               caldata_extract "art" 0x11000 0xeb8
                ;;
        netgear,wnr2200-8m|\
        netgear,wnr2200-16m|\
@@ -111,9 +119,15 @@ case "$FIRMWARE" in
        ubnt,nanostation-loco-m|\
        ubnt,nanostation-m|\
        ubnt,picostation-m|\
+       ubnt,powerbridge-m|\
        ubnt,rocket-m)
                caldata_extract "art" 0x1000 0x1000
                ;;
+       openmesh,mr600-v1|\
+       openmesh,mr600-v2)
+               caldata_extract "ART" 0x5000 0x440
+               ;;
+       wd,mynet-n600|\
        wd,mynet-n750)
                caldata_extract "art" 0x5000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
@@ -129,19 +143,17 @@ case "$FIRMWARE" in
        ;;
 "ath9k-eeprom-pci-0000:00:11.0.bin")
        case $board in
-       buffalo,wzr-hp-ag300h|\
-       netgear,wndr3700|\
-       netgear,wndr3700-v2|\
-       netgear,wndr3800|\
-       netgear,wndr3800ch|\
-       netgear,wndrmac-v1|\
-       netgear,wndrmac-v2)
+       buffalo,wzr-600dhp|\
+       buffalo,wzr-hp-ag300h)
                caldata_extract "art" 0x1000 0xeb8
                ;;
        dlink,dir-825-b1)
                caldata_extract "caldata" 0x1000 0xeb8
                ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
                ;;
+       meraki,mr16)
+               caldata_extract "art" 0x11000 0xeb8
+               ;;
        *)
                caldata_die "board $board is not supported yet"
                ;;
@@ -149,19 +161,17 @@ case "$FIRMWARE" in
        ;;
 "ath9k-eeprom-pci-0000:00:12.0.bin")
        case $board in
-       buffalo,wzr-hp-ag300h|\
-       netgear,wndr3700|\
-       netgear,wndr3700-v2|\
-       netgear,wndr3800|\
-       netgear,wndr3800ch|\
-       netgear,wndrmac-v1|\
-       netgear,wndrmac-v2)
+       buffalo,wzr-600dhp|\
+       buffalo,wzr-hp-ag300h)
                caldata_extract "art" 0x5000 0xeb8
                ;;
        dlink,dir-825-b1)
                caldata_extract "caldata" 0x5000 0xeb8
                ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
                ;;
+       meraki,mr16)
+               caldata_extract "art" 0x15000 0xeb8
+               ;;
        *)
                caldata_die "board $board is not supported yet"
                ;;