ath79: calibrate all ar9344 tl-WDRxxxx with nvmem

[openwrt/staging/stintel.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 10-ath9k-eeprom

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index da78e74dcb5c97b42915194b528b68a647b5913b..bddaf0bdf8f35179c273095d2b26e99fb6c20378 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,6 +12,11 @@ case "$FIRMWARE" in
        8dev,lima)
                caldata_extract "art" 0x1000 0x800
                ;;
+       asus,pl-ac56|\
+       asus,rp-ac51|\
+       asus,rp-ac66)
+               caldata_extract "art" 0x1000 0x440
+               ;;
        avm,fritz1750e|\
        avm,fritz4020|\
        avm,fritz450e|\
@@ -30,6 +35,7 @@ case "$FIRMWARE" in
        dlink,dir-859-a1|\
        nec,wf1200cr|\
        nec,wg1200cr|\
+       wd,mynet-n600|\
        wd,mynet-n750)
                caldata_extract "art" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
@@ -53,6 +59,10 @@ case "$FIRMWARE" in
                caldata_extract "calibrate" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1)
                ;;
+       extreme-networks,ws-ap3805i)
+               caldata_extract "art" 0x1000 0x440
+               ath9k_patch_mac $(mtd_get_mac_ascii cfg1 RADIOADDR1)
+               ;;
        nec,wg800hp)
                caldata_extract "art" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
@@ -61,6 +71,11 @@ case "$FIRMWARE" in
                caldata_extract "radiocfg" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
                ;;
+       tplink,deco-s4-v2)
+               caldata_extract "art" 0x1000 0x440
+               base_mac=$(mtd_get_mac_encrypted_deco $(find_mtd_part config))
+               ath9k_patch_mac $(macaddr_add $base_mac 1)
+               ;;
        *)
                caldata_die "board $board is not supported yet"
                ;;
@@ -68,18 +83,15 @@ case "$FIRMWARE" in
        ;;
 "ath9k-eeprom-pci-0000:00:00.0.bin")
        case $board in
+       araknis,an-300-ap-i-n|\
        atheros,db120|\
        engenius,eap600|\
        engenius,ecb600|\
        mercury,mw4530r-v1|\
        ocedo,raccoon|\
-       tplink,tl-wdr3500-v1|\
-       tplink,tl-wdr3600-v1|\
-       tplink,tl-wdr4300-v1|\
-       tplink,tl-wdr4300-v1-il|\
-       tplink,tl-wdr4310-v1|\
-       tplink,tl-wdr4900-v2|\
        ubnt,unifi-ap-pro|\
+       watchguard,ap100|\
+       watchguard,ap200|\
        winchannel,wb2000)
                caldata_extract "art" 0x5000 0x440
                ;;
@@ -110,22 +122,18 @@ case "$FIRMWARE" in
        netgear,wnr2200-16m|\
        pcs,cap324|\
        tplink,tl-wr2543-v1|\
-       tplink,tl-wr842n-v1|\
-       ubnt,airrouter|\
-       ubnt,bullet-m-ar7240|\
-       ubnt,bullet-m-ar7241|\
-       ubnt,nanobridge-m|\
-       ubnt,nanostation-loco-m|\
-       ubnt,nanostation-m|\
-       ubnt,picostation-m|\
-       ubnt,powerbridge-m|\
-       ubnt,rocket-m)
+       tplink,tl-wr842n-v1)
                caldata_extract "art" 0x1000 0x1000
                ;;
        openmesh,mr600-v1|\
-       openmesh,mr600-v2)
+       openmesh,mr600-v2|\
+       openmesh,om5p-an)
                caldata_extract "ART" 0x5000 0x440
                ;;
+       openmesh,om2p-v1)
+               caldata_extract "ART" 0x1000 0x440
+               ;;
+       wd,mynet-n600|\
        wd,mynet-n750)
                caldata_extract "art" 0x5000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
@@ -142,10 +150,12 @@ case "$FIRMWARE" in
 "ath9k-eeprom-pci-0000:00:11.0.bin")
        case $board in
        buffalo,wzr-600dhp|\
-       buffalo,wzr-hp-ag300h)
+       buffalo,wzr-hp-ag300h|\
+       netgear,wndap360)
                caldata_extract "art" 0x1000 0xeb8
                ;;
-       dlink,dir-825-b1)
+       dlink,dir-825-b1|\
+       trendnet,tew-673gru)
                caldata_extract "caldata" 0x1000 0xeb8
                ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
                ;;
@@ -160,10 +170,12 @@ case "$FIRMWARE" in
 "ath9k-eeprom-pci-0000:00:12.0.bin")
        case $board in
        buffalo,wzr-600dhp|\
-       buffalo,wzr-hp-ag300h)
+       buffalo,wzr-hp-ag300h|\
+       netgear,wndap360)
                caldata_extract "art" 0x5000 0xeb8
                ;;
-       dlink,dir-825-b1)
+       dlink,dir-825-b1|\
+       trendnet,tew-673gru)
                caldata_extract "caldata" 0x5000 0xeb8
                ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
                ;;