ath79: add support for ASUS PL-AC56

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 9e4b4496e52c99126d4c5f3ea9cdb82a7386e038..f522268e59c07725ce7e6e601f4ca3830243eb0b 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -11,23 +11,29 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
        allnet,all-wap02860ac|\
+       araknis,an-500-ap-i-ac|\
+       araknis,an-700-ap-i-ac|\
        engenius,eap1200h|\
        engenius,enstationac-v1|\
        glinet,gl-x750)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
-               ;;
-       avm,fritz1750e|\
-       avm,fritzdvbc)
-               caldata_extract "urlader" 0x198a 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
                ;;
+       asus,pl-ac56|\
+       asus,rp-ac66|\
        comfast,cf-wr650ac-v1|\
        comfast,cf-wr650ac-v2|\
+       devolo,dlan-pro-1200plus-ac|\
        devolo,magic-2-wifi|\
+       joyit,jt-or750i|\
        qxwlan,e1700ac-v2-8m|\
        qxwlan,e1700ac-v2-16m|\
        qxwlan,e600gac-v2-8m|\
        qxwlan,e600gac-v2-16m|\
+       sophos,ap55|\
+       sophos,ap55c|\
+       sophos,ap100|\
+       sophos,ap100c|\
        ubnt,aircube-ac|\
        ubnt,bullet-ac|\
        ubnt,unifiac-lite|\
@@ -38,14 +44,21 @@ case "$FIRMWARE" in
        ubnt,litebeam-ac-gen2|\
        ubnt,nanobeam-ac|\
        ubnt,nanobeam-ac-gen2|\
+       ubnt,nanobeam-ac-xc|\
        ubnt,nanostation-ac|\
        ubnt,nanostation-ac-loco|\
        ubnt,powerbeam-5ac-500|\
        ubnt,powerbeam-5ac-gen2|\
+       ubnt,rocket-5ac-lite|\
        ubnt,unifiac-pro|\
-       yuncore,a770)
+       yuncore,a770|\
+       yuncore,xd3200)
                caldata_extract "art" 0x5000 0x844
                ;;
+       avm,fritz1750e|\
+       avm,fritzdvbc)
+               caldata_extract "urlader" 0x198a 0x844
+               ;;
        devolo,dvl1200e|\
        devolo,dvl1200i|\
        devolo,dvl1750c|\
@@ -55,12 +68,6 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
                ;;
-       dlink,dap-2660-a1|\
-       dlink,dap-2695-a1|\
-       dlink,dap-3662-a1)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-               ;;
        dlink,dir-859-a1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
@@ -79,15 +86,15 @@ case "$FIRMWARE" in
        sitecom,wlr-7100|\
        zyxel,nbg6616)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
                ;;
        engenius,ews511ap)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+               ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 1)
                ;;
        glinet,gl-ar750)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
                ;;
        nec,wg800hp)
                caldata_extract "art" 0x5000 0x844
@@ -98,14 +105,13 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
                ;;
+       openmesh,a40|\
+       openmesh,a60|\
        openmesh,mr1750-v1|\
-       openmesh,mr1750-v2)
-               caldata_extract "ART" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
-               ;;
+       openmesh,mr1750-v2|\
        openmesh,om5p-ac-v2)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+               caldata_extract "ART" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
                ;;
        qihoo,c301)
                caldata_extract "radiocfg" 0x5000 0x844
@@ -121,46 +127,49 @@ case "$FIRMWARE" in
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
                ;;
        tplink,archer-c5-v1|\
-       tplink,archer-c7-v2|\
        tplink,tl-wdr7500-v3)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
                ;;
        tplink,archer-d50-v1)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) 2)
                ;;
        tplink,archer-d7-v1|\
        tplink,archer-d7b-v1)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) +2)
-               ;;
-       tplink,eap245-v1|\
-       tplink,re450-v2|\
-       tplink,re450-v3)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
                ;;
        tplink,re350k-v1)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +2)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
                ;;
        tplink,re355-v1|\
        tplink,re450-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
                ;;
+       tplink,re450-v2|\
+       tplink,re450-v3|\
+       tplink,re455-v1)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+               ;;
        tplink,tl-wpa8630-v1)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)
                ;;
        esac
        ;;
 "ath10k/cal-pci-0000:01:00.0.bin")
        case $board in
+       openmesh,om5p-ac-v1)
+               caldata_extract "ART" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+               ;;
        sitecom,wlr-8100)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
                ;;
        esac
        ;;
@@ -178,17 +187,11 @@ case "$FIRMWARE" in
        comfast,cf-ew72|\
        comfast,cf-wr752ac-v1)
                caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
                ;;
-       dlink,dap-2680-a1)
-               caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-               ;;
        dlink,dir-842-c1|\
        dlink,dir-842-c2|\
        dlink,dir-842-c3)
@@ -198,6 +201,7 @@ case "$FIRMWARE" in
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
+       nec,wf1200cr|\
        nec,wg1200cr)
                caldata_extract "art" 0x5000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
@@ -222,26 +226,29 @@ case "$FIRMWARE" in
        tplink,archer-c60-v2|\
        tplink,archer-c60-v3|\
        tplink,archer-c6-v2|\
-       tplink,archer-c6-v2-us)
+       tplink,archer-c6-v2-us|\
+       tplink,tl-wa1201-v2)
                caldata_extract "art" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
-       tplink,eap225-outdoor-v1|\
-       tplink,eap225-v3|\
-       tplink,eap225-wall-v2|\
-       tplink,tl-wpa8630p-v2-int|\
-       tplink,tl-wpa8630p-v2.0-eu|\
-       tplink,tl-wpa8630p-v2.1-eu)
+       tplink,cpe710-v1)
                caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ath10k_patch_mac $(mtd_get_mac_binary info 0x8)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
-       tplink,eap245-v3)
+       xiaomi,aiot-ac2350)
+               caldata_extract "art" 0x5000 0x2f20
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9984/hw1.0/board.bin
+               ;;
+       tplink,deco-m4r-v1)
                caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x8) -1)
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
        yuncore,a782|\
        yuncore,xd4200)