-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
-
-# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
-# VERSION_DIST being on the place of major(?) version number, so we need to
-# use some number.
-UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
-
-# mkubntimage is using the kernel image direct
-# routerboard creates partitions out of the ubnt header
-define Build/mkubntimage
- -$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $(IMAGE_KERNEL) -r $@ -o $@
-endef
-
-# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
-# booting the image, the size doesn't matter.
-define Build/mkubntimage-split
- -[ -f $@ ] && ( \
- dd if=$@ of=$@.old1 bs=1024k count=1; \
- dd if=$@ of=$@.old2 bs=1024k skip=1; \
- $(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
- -k $@.old1 -r $@.old2 -o $@; \
- rm $@.old1 $@.old2 )
-endef
-
-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-# UBNT_VERSION e.g. one of (6.0.0, 8.5.0)
-define Device/ubnt
- DEVICE_VENDOR := Ubiquiti
- DEVICE_PACKAGES := kmod-usb2
- IMAGES += factory.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split
-endef
-
-define Device/ubnt-bz
- $(Device/ubnt)
- ATH_SOC := ar7241
- IMAGE_SIZE := 7448k
- UBNT_BOARD := XM
- UBNT_CHIP := ar7240
- UBNT_TYPE := BZ
- UBNT_VERSION := 6.0.0
-endef
+include ./common-ubnt.mk
-define Device/ubnt-wa
- $(Device/ubnt)
- ATH_SOC := ar9342
- IMAGE_SIZE := 15744k
- UBNT_BOARD := WA
- UBNT_CHIP := ar934x
- UBNT_TYPE := WA
- UBNT_VERSION := 8.5.0
-endef
-
-define Device/ubnt-xm
- $(Device/ubnt)
- ATH_SOC := ar7241
- DEVICE_VARIANT := XM
- DEVICE_PACKAGES += kmod-usb-ohci
- IMAGE_SIZE := 7448k
- UBNT_BOARD := XM
- UBNT_CHIP := ar7240
- UBNT_TYPE := XM
- UBNT_VERSION := 6.0.0
- KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
-endef
-
-define Device/ubnt-xw
- $(Device/ubnt)
- ATH_SOC := ar9342
- DEVICE_VARIANT := XW
- IMAGE_SIZE := 7552k
- UBNT_BOARD := XM
- UBNT_CHIP := ar934x
- UBNT_REVISION := 42.$(UBNT_REVISION)
- UBNT_TYPE := XW
- UBNT_VERSION := 6.0.4
+define Device/ubnt_aircube-ac
+ $(Device/ubnt-acb)
+ SOC := ar9342
+ DEVICE_MODEL := airCube AC
+ UBNT_CHIP := ar9342
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
+TARGET_DEVICES += ubnt_aircube-ac
-define Device/ubnt_acb-isp
- $(Device/ubnt)
- ATH_SOC := qca9533
+define Device/ubnt_aircube-isp
+ $(Device/ubnt-acb)
+ SOC := qca9533
DEVICE_MODEL := airCube ISP
- IMAGE_SIZE := 15744k
- UBNT_BOARD := ACB-ISP
UBNT_CHIP := qca9533
- UBNT_TYPE := ACB
- UBNT_VERSION := 6.0.0
- IMAGES := sysupgrade.bin
-endef
-TARGET_DEVICES += ubnt_acb-isp
-
-define Device/ubnt_airrouter
- $(Device/ubnt-xm)
- DEVICE_MODEL := AirRouter
- SUPPORTED_DEVICES += airrouter
+ SUPPORTED_DEVICES += ubnt,acb-isp
endef
-TARGET_DEVICES += ubnt_airrouter
+TARGET_DEVICES += ubnt_aircube-isp
-define Device/ubnt_bullet-m
- $(Device/ubnt-xm)
- DEVICE_MODEL := Bullet-M
- DEVICE_PACKAGES += rssileds
- SUPPORTED_DEVICES += bullet-m
+define Device/ubnt_bullet-ac
+ $(Device/ubnt-2wa)
+ DEVICE_MODEL := Bullet AC
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
-TARGET_DEVICES += ubnt_bullet-m
+TARGET_DEVICES += ubnt_bullet-ac
define Device/ubnt_bullet-m-xw
$(Device/ubnt-xw)
- DEVICE_MODEL := Bullet-M
+ DEVICE_MODEL := Bullet M
DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += bullet-m-xw
endef
TARGET_DEVICES += ubnt_bullet-m-xw
+define Device/ubnt_edgeswitch-5xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 5XP
+endef
+TARGET_DEVICES += ubnt_edgeswitch-5xp
+
+define Device/ubnt_edgeswitch-8xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 8XP
+ DEVICE_PACKAGES += kmod-switch-bcm53xx-mdio
+ DEFAULT := n
+endef
+TARGET_DEVICES += ubnt_edgeswitch-8xp
+
define Device/ubnt_lap-120
$(Device/ubnt-wa)
- DEVICE_MODEL := LiteAP ac
- DEVICE_VARIANT := LAP-120
- DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ DEVICE_MODEL := LiteAP ac (LAP-120)
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += ubnt_lap-120
$(Device/ubnt-wa)
DEVICE_MODEL := LiteBeam AC
DEVICE_VARIANT := Gen2
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += ubnt_litebeam-ac-gen2
define Device/ubnt_nanobeam-ac
$(Device/ubnt-wa)
DEVICE_MODEL := NanoBeam AC
- DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
+ DEVICE_VARIANT := Gen1
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
TARGET_DEVICES += ubnt_nanobeam-ac
+define Device/ubnt_nanobeam-ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanobeam-ac-gen2
+
+define Device/ubnt_nanobeam-ac-xc
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen1 (XC)
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanobeam-ac-xc
+
+define Device/ubnt_nanobeam-m5-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := NanoBeam M5
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_nanobeam-m5-xw
+
define Device/ubnt_nanostation-ac
$(Device/ubnt-wa)
DEVICE_MODEL := Nanostation AC
- DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
TARGET_DEVICES += ubnt_nanostation-ac
define Device/ubnt_nanostation-ac-loco
$(Device/ubnt-wa)
DEVICE_MODEL := Nanostation AC loco
- DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += ubnt_nanostation-ac-loco
-define Device/ubnt_nanostation-m
- $(Device/ubnt-xm)
- DEVICE_MODEL := Nanostation M
+define Device/ubnt_nanostation-loco-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Nanostation Loco M
DEVICE_PACKAGES += rssileds
- SUPPORTED_DEVICES += nanostation-m
+ SUPPORTED_DEVICES += loco-m-xw
endef
-TARGET_DEVICES += ubnt_nanostation-m
+TARGET_DEVICES += ubnt_nanostation-loco-m-xw
define Device/ubnt_nanostation-m-xw
$(Device/ubnt-xw)
endef
TARGET_DEVICES += ubnt_nanostation-m-xw
-define Device/ubnt_rocket-m
- $(Device/ubnt-xm)
- DEVICE_MODEL := Rocket-M
+define Device/ubnt_powerbeam-5ac-500
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := 500
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_powerbeam-5ac-500
+
+define Device/ubnt_powerbeam-5ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
+
+define Device/ubnt_powerbeam-m2-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := PowerBeam M2
DEVICE_PACKAGES += rssileds
- SUPPORTED_DEVICES += rocket-m
+ SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_powerbeam-m2-xw
+
+define Device/ubnt_powerbeam-m5-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := PowerBeam M5
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_powerbeam-m5-xw
+
+define Device/ubnt_rocket-5ac-lite
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := Rocket 5AC
+ DEVICE_VARIANT := Lite
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
-TARGET_DEVICES += ubnt_rocket-m
+TARGET_DEVICES += ubnt_rocket-5ac-lite
define Device/ubnt_routerstation_common
- DEVICE_PACKAGES := -kmod-ath9k -wpad-mini -uboot-envtools kmod-usb-ohci \
+ DEVICE_PACKAGES := -kmod-ath9k -wpad-basic-mbedtls -uboot-envtools kmod-usb-ohci \
kmod-usb2 fconfig
DEVICE_VENDOR := Ubiquiti
- ATH_SOC := ar7161
- IMAGE_SIZE := 16128k
- IMAGES := factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | \
- check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
+ SOC := ar7161
+ LOADER_TYPE := bin
+ LOADER_FLASH_OFFS := 0x50000
+ COMPILE := loader-$(1).bin
+ COMPILE/loader-$(1).bin := loader-okli-compile | lzma | pad-to 128k
+ IMAGE_SIZE := 16000k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | \
+ mkubntimage $$$$(KDIR)/loader-$(1).bin | check-size
+ IMAGE/sysupgrade.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | check-size | \
+ sysupgrade-tar kernel=$$$$(KDIR)/loader-$(1).bin rootfs=$$$$@ | append-metadata
+ KERNEL := kernel-bin | append-dtb | lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (19.07 and 21.02) \
+ due to kernel drivers restrictions. Upgrade via sysupgrade mechanism is one way operation. \
+ Downgrading OpenWrt version will involve usage of TFTP recovery or bootloader command line interface.
endef
define Device/ubnt_routerstation
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
DEVICE_PACKAGES += -swconfig
- SUPPORTED_DEVICES += routerstation
endef
TARGET_DEVICES += ubnt_routerstation
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
- SUPPORTED_DEVICES += routerstation-pro
endef
TARGET_DEVICES += ubnt_routerstation-pro
-define Device/ubnt_unifi
+define Device/ubnt_unifi-ap
+ $(Device/ubnt-bz)
+ DEVICE_MODEL := UniFi AP
+ SUPPORTED_DEVICES += unifi ubnt,unifi
+endef
+TARGET_DEVICES += ubnt_unifi-ap
+
+define Device/ubnt_unifi-ap-lr
$(Device/ubnt-bz)
- DEVICE_MODEL := UniFi
- SUPPORTED_DEVICES += unifi
+ DEVICE_MODEL := UniFi AP
+ DEVICE_VARIANT := LR
+ SUPPORTED_DEVICES += unifi ubnt,unifi ubnt,unifi-ap
endef
-TARGET_DEVICES += ubnt_unifi
+TARGET_DEVICES += ubnt_unifi-ap-lr
define Device/ubnt_unifiac
DEVICE_VENDOR := Ubiquiti
- ATH_SOC := qca9563
- IMAGE_SIZE := 7744k
+ SOC := qca9563
+ IMAGE_SIZE := 15488k
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
define Device/ubnt_unifiac-lite
$(Device/ubnt_unifiac)
- DEVICE_MODEL := UniFi AC-Lite
+ DEVICE_MODEL := UniFi AC Lite
+ DEVICE_PACKAGES += -swconfig
SUPPORTED_DEVICES += unifiac-lite
endef
TARGET_DEVICES += ubnt_unifiac-lite
define Device/ubnt_unifiac-lr
$(Device/ubnt_unifiac)
- DEVICE_MODEL := UniFi AC-LR
+ DEVICE_MODEL := UniFi AC LR
+ DEVICE_PACKAGES += -swconfig
SUPPORTED_DEVICES += unifiac-lite ubnt,unifiac-lite
endef
TARGET_DEVICES += ubnt_unifiac-lr
define Device/ubnt_unifiac-mesh
$(Device/ubnt_unifiac)
- DEVICE_MODEL := UniFi AC-Mesh
- SUPPORTED_DEVICES += ubnt-unifiac-mesh
+ DEVICE_MODEL := UniFi AC Mesh
+ DEVICE_PACKAGES += -swconfig
+ SUPPORTED_DEVICES += unifiac-lite
endef
TARGET_DEVICES += ubnt_unifiac-mesh
define Device/ubnt_unifiac-mesh-pro
$(Device/ubnt_unifiac)
- DEVICE_MODEL := UniFi AC-Mesh Pro
- SUPPORTED_DEVICES += ubnt-unifiac-mesh-pro
+ DEVICE_MODEL := UniFi AC Mesh Pro
+ SUPPORTED_DEVICES += unifiac-pro
endef
TARGET_DEVICES += ubnt_unifiac-mesh-pro
define Device/ubnt_unifiac-pro
$(Device/ubnt_unifiac)
- DEVICE_MODEL := UniFi AC-Pro
+ DEVICE_MODEL := UniFi AC Pro
DEVICE_PACKAGES += kmod-usb2
- SUPPORTED_DEVICES += ubnt-unifiac-pro
+ SUPPORTED_DEVICES += unifiac-pro
endef
TARGET_DEVICES += ubnt_unifiac-pro
+
+define Device/ubnt_unifi-ap-outdoor-plus
+ $(Device/ubnt-bz)
+ $(Device/ubnt-unifi-jffs2)
+ DEVICE_MODEL := UniFi AP Outdoor+
+ SUPPORTED_DEVICES += unifi-outdoor-plus
+endef
+TARGET_DEVICES += ubnt_unifi-ap-outdoor-plus
+
+define Device/ubnt_unifi-ap-pro
+ $(Device/ubnt-unifi-jffs2)
+ SOC := ar9344
+ DEVICE_MODEL := UniFi AP Pro
+ UBNT_CHIP := ar934x
+ SUPPORTED_DEVICES += uap-pro
+endef
+TARGET_DEVICES += ubnt_unifi-ap-pro