include ./common-buffalo.mk
-include ./common-engenius.mk
include ./common-netgear.mk
+include ./common-senao.mk
include ./common-tp-link.mk
include ./common-yuncore.mk
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
+DEVICE_VARS += OPENMESH_CE_TYPE
define Build/add-elecom-factory-initramfs
$(eval edimax_model=$(word 1,$(1)))
-f 0x70000 -S 0x01100000 \
-i $@ -o $@.factory
- ( \
- echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
- echo -n "0.00" | dd bs=16 count=1 conv=sync; \
- dd if=$@.factory; \
- ) > $@.factory.new
+ $(call Build/elecom-product-header,$(product) $@.factory)
- if [ "$$(stat -c%s $@.factory.new)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \
- mv $@.factory.new $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \
+ if [ "$$(stat -c%s $@.factory)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \
+ mv $@.factory $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \
else \
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
fi
endef
define Build/append-md5sum-bin
- $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
+ $(MKHASH) md5 $@ | sed 's/../\\\\x&/g' |\
xargs echo -ne >> $@
endef
TARGET_DEVICES += alfa-network_r36a
define Device/allnet_all-wap02860ac
+ $(Device/senao_loader_okli)
SOC := qca9558
DEVICE_VENDOR := ALLNET
DEVICE_MODEL := ALL-WAP02860AC
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
- IMAGE_SIZE := 13120k
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-allwap02860ac
endef
TARGET_DEVICES += allnet_all-wap02860ac
endef
TARGET_DEVICES += buffalo_wzr-hp-ag300h
+define Device/buffalo_wzr-hp-g300nh
+ $(Device/buffalo_common)
+ SOC := ar9132
+ BUFFALO_PRODUCT := WZR-HP-G300NH
+ BUFFALO_HWVER := 1
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-gpio-nxp-74hc153
+ BLOCKSIZE := 128k
+ IMAGE_SIZE := 32128k
+ SUPPORTED_DEVICES += wzr-hp-g300nh
+endef
+
+define Device/buffalo_wzr-hp-g300nh-rb
+ $(Device/buffalo_wzr-hp-g300nh)
+ DEVICE_MODEL := WZR-HP-G300NH (RTL8366RB switch)
+endef
+TARGET_DEVICES += buffalo_wzr-hp-g300nh-rb
+
+define Device/buffalo_wzr-hp-g300nh-s
+ $(Device/buffalo_wzr-hp-g300nh)
+ DEVICE_MODEL := WZR-HP-G300NH (RTL8366S switch)
+endef
+TARGET_DEVICES += buffalo_wzr-hp-g300nh-s
+
define Device/buffalo_wzr-hp-g302h-a1a0
$(Device/buffalo_common)
SOC := ar7242
endef
TARGET_DEVICES += dlink_dap-3320-a1
+define Device/dlink_dap-3662-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9558
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-3662
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15296k
+ DAP_SIGNATURE := wapac11_dkbs_dap3662
+endef
+TARGET_DEVICES += dlink_dap-3662-a1
+
define Device/dlink_dch-g020-a1
SOC := qca9531
DEVICE_VENDOR := D-Link
endef
TARGET_DEVICES += embeddedwireless_dorin
+define Device/engenius_eap1200h
+ $(Device/senao_loader_okli)
+ SOC := qca9557
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := EAP1200H
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := ar71xx-generic-eap1200h
+endef
+TARGET_DEVICES += engenius_eap1200h
+
define Device/engenius_eap300-v2
- $(Device/engenius_loader_okli)
+ $(Device/senao_loader_okli)
SOC := ar9341
+ DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP300
DEVICE_VARIANT := v2
- IMAGE_SIZE := 12032k
- LOADER_FLASH_OFFS := 0x230000
- ENGENIUS_IMGNAME := senao-eap300v2
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-eap300v2
endef
TARGET_DEVICES += engenius_eap300-v2
define Device/engenius_eap600
- $(Device/engenius_loader_okli)
+ $(Device/senao_loader_okli)
SOC := ar9344
+ DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP600
- IMAGE_SIZE := 12032k
- LOADER_FLASH_OFFS := 0x230000
- ENGENIUS_IMGNAME := senao-eap600
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-eap600
endef
TARGET_DEVICES += engenius_eap600
TARGET_DEVICES += engenius_ecb1750
define Device/engenius_ecb600
- $(Device/engenius_loader_okli)
+ $(Device/senao_loader_okli)
SOC := ar9344
+ DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ECB600
- IMAGE_SIZE := 12032k
- LOADER_FLASH_OFFS := 0x230000
- ENGENIUS_IMGNAME := senao-ecb600
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-ecb600
endef
TARGET_DEVICES += engenius_ecb600
define Device/engenius_ens202ext-v1
- $(Device/engenius_loader_okli)
+ $(Device/senao_loader_okli)
SOC := ar9341
+ DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENS202EXT
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
- IMAGE_SIZE := 12032k
- LOADER_FLASH_OFFS := 0x230000
- ENGENIUS_IMGNAME := senao-ens202ext
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-ens202ext
endef
TARGET_DEVICES += engenius_ens202ext-v1
define Device/engenius_enstationac-v1
- $(Device/engenius_loader_okli)
+ $(Device/senao_loader_okli)
SOC := qca9557
+ DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EnStationAC
DEVICE_VARIANT := v1
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct rssileds
- IMAGE_SIZE := 11520k
- LOADER_FLASH_OFFS := 0x230000
- ENGENIUS_IMGNAME := ar71xx-generic-enstationac
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := ar71xx-generic-enstationac
endef
TARGET_DEVICES += engenius_enstationac-v1
DEVICE_VENDOR := eTactica
DEVICE_MODEL := EG200
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
- kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
+ kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += rme-eg200
endef
endef
TARGET_DEVICES += librerouter_librerouter-v1
+define Device/meraki_mr12
+ SOC := ar7242
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := MR12
+ IMAGE_SIZE := 15616k
+ DEVICE_PACKAGES := kmod-owl-loader rssileds
+ SUPPORTED_DEVICES += mr12
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Partitions differ from ar71xx version of MR12. Image format is incompatible. \
+ To use sysupgrade, you must change /lib/update/common.sh::get_image to prepend 128K zeroes to this image, \
+ and change the bootcmd in u-boot to "bootm 0xbf0a0000". After that, you can use "sysupgrade -F -n". \
+ Make sure you do not keep your old config, as ethernet setup is not compatible either. \
+ For more details, see the OpenWrt Wiki: https://openwrt.org/toh/meraki/MR12, \
+ or the commit message of the MR12 ath79 port on git.openwrt.org.
+endef
+TARGET_DEVICES += meraki_mr12
+
define Device/meraki_mr16
SOC := ar7161
DEVICE_VENDOR := Meraki
endef
TARGET_DEVICES += ocedo_ursus
-define Device/openmesh_om2p-common
+define Device/openmesh_common_64k
+ DEVICE_VENDOR := OpenMesh
+ DEVICE_PACKAGES := uboot-envtools
+ IMAGE_SIZE := 7808k
+ BLOCKSIZE := 64k
+ OPENMESH_CE_TYPE :=
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
+ pad-to $$(BLOCKSIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
+ openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
+endef
+
+define Device/openmesh_common_256k
DEVICE_VENDOR := OpenMesh
DEVICE_PACKAGES := uboot-envtools
IMAGE_SIZE := 7168k
BLOCKSIZE := 256k
+ OPENMESH_CE_TYPE :=
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
pad-to $$(BLOCKSIZE)
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
- openmesh-image ce_type=OM2P | append-metadata
+ openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
+endef
+
+define Device/openmesh_mr600-v1
+ $(Device/openmesh_common_64k)
+ SOC := ar9344
+ DEVICE_MODEL := MR600
+ DEVICE_VARIANT := v1
+ OPENMESH_CE_TYPE := MR600
+ SUPPORTED_DEVICES += mr600
+endef
+TARGET_DEVICES += openmesh_mr600-v1
+
+define Device/openmesh_mr600-v2
+ $(Device/openmesh_common_64k)
+ SOC := ar9344
+ DEVICE_MODEL := MR600
+ DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := MR600
+ SUPPORTED_DEVICES += mr600v2
+endef
+TARGET_DEVICES += openmesh_mr600-v2
+
+define Device/openmesh_mr900-v1
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR900
+ DEVICE_VARIANT := v1
+ OPENMESH_CE_TYPE := MR900
+ SUPPORTED_DEVICES += mr900
+endef
+TARGET_DEVICES += openmesh_mr900-v1
+
+define Device/openmesh_mr900-v2
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR900
+ DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := MR900
+ SUPPORTED_DEVICES += mr900v2
endef
+TARGET_DEVICES += openmesh_mr900-v2
+
+define Device/openmesh_mr1750-v1
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR1750
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ OPENMESH_CE_TYPE := MR1750
+ SUPPORTED_DEVICES += mr1750
+endef
+TARGET_DEVICES += openmesh_mr1750-v1
+
+define Device/openmesh_mr1750-v2
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR1750
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ OPENMESH_CE_TYPE := MR1750
+ SUPPORTED_DEVICES += mr1750v2
+endef
+TARGET_DEVICES += openmesh_mr1750-v2
define Device/openmesh_om2p-v2
- $(Device/openmesh_om2p-common)
+ $(Device/openmesh_common_256k)
SOC := ar9330
DEVICE_MODEL := OM2P
DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := OM2P
SUPPORTED_DEVICES += om2pv2
endef
TARGET_DEVICES += openmesh_om2p-v2
define Device/openmesh_om2p-v4
- $(Device/openmesh_om2p-common)
+ $(Device/openmesh_common_256k)
SOC := qca9533
DEVICE_MODEL := OM2P
DEVICE_VARIANT := v4
+ OPENMESH_CE_TYPE := OM2P
SUPPORTED_DEVICES += om2pv4
endef
TARGET_DEVICES += openmesh_om2p-v4
define Device/openmesh_om2p-hs-v1
- $(Device/openmesh_om2p-common)
+ $(Device/openmesh_common_256k)
SOC := ar9341
DEVICE_MODEL := OM2P-HS
DEVICE_VARIANT := v1
+ OPENMESH_CE_TYPE := OM2P
SUPPORTED_DEVICES += om2p-hs
endef
TARGET_DEVICES += openmesh_om2p-hs-v1
define Device/openmesh_om2p-hs-v2
- $(Device/openmesh_om2p-common)
+ $(Device/openmesh_common_256k)
SOC := ar9341
DEVICE_MODEL := OM2P-HS
DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := OM2P
SUPPORTED_DEVICES += om2p-hsv2
endef
TARGET_DEVICES += openmesh_om2p-hs-v2
define Device/openmesh_om2p-hs-v3
- $(Device/openmesh_om2p-common)
+ $(Device/openmesh_common_256k)
SOC := ar9341
DEVICE_MODEL := OM2P-HS
DEVICE_VARIANT := v3
+ OPENMESH_CE_TYPE := OM2P
SUPPORTED_DEVICES += om2p-hsv3
endef
TARGET_DEVICES += openmesh_om2p-hs-v3
define Device/openmesh_om2p-hs-v4
- $(Device/openmesh_om2p-common)
+ $(Device/openmesh_common_256k)
SOC := qca9533
DEVICE_MODEL := OM2P-HS
DEVICE_VARIANT := v4
+ OPENMESH_CE_TYPE := OM2P
SUPPORTED_DEVICES += om2p-hsv4
endef
TARGET_DEVICES += openmesh_om2p-hs-v4
define Device/openmesh_om2p-lc
- $(Device/openmesh_om2p-common)
+ $(Device/openmesh_common_256k)
SOC := ar9330
DEVICE_MODEL := OM2P-LC
+ OPENMESH_CE_TYPE := OM2P
SUPPORTED_DEVICES += om2p-lc
endef
TARGET_DEVICES += openmesh_om2p-lc
-define Device/openmesh_om5p-common
- SOC := ar9344
- DEVICE_VENDOR := OpenMesh
- DEVICE_PACKAGES := uboot-envtools
- IMAGE_SIZE := 7808k
- BLOCKSIZE := 64k
- KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
- pad-to $$(BLOCKSIZE)
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
- openmesh-image ce_type=OM5P | append-metadata
-endef
-
define Device/openmesh_om5p
- $(Device/openmesh_om5p-common)
+ $(Device/openmesh_common_64k)
+ SOC := ar9344
DEVICE_MODEL := OM5P
+ OPENMESH_CE_TYPE := OM5P
SUPPORTED_DEVICES += om5p
endef
TARGET_DEVICES += openmesh_om5p
DEVICE_MODEL := WD323
IMAGE_SIZE := 16000k
DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio kmod-rtc-pcf8563 \
- kmod-usb-serial kmod-usb-serial-cp210x uqmi
+ kmod-usb-serial-cp210x uqmi
endef
TARGET_DEVICES += zbtlink_zbt-wd323
projects / openwrt / staging / chunkeey.git / blobdiff