include ./common-buffalo.mk
include ./common-netgear.mk
+include ./common-senao.mk
include ./common-tp-link.mk
include ./common-yuncore.mk
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
-DEVICE_VARS += KERNEL_INITRAMFS_PREFIX
-DEVICE_VARS += DAP_SIGNATURE ENGENIUS_IMGNAME
+DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
+DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
+DEVICE_VARS += OPENMESH_CE_TYPE
define Build/add-elecom-factory-initramfs
$(eval edimax_model=$(word 1,$(1)))
-f 0x70000 -S 0x01100000 \
-i $@ -o $@.factory
- ( \
- echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
- echo -n "0.00" | dd bs=16 count=1 conv=sync; \
- dd if=$@.factory; \
- ) > $@.factory.new
+ $(call Build/elecom-product-header,$(product) $@.factory)
- if [ "$$(stat -c%s $@.factory.new)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \
- mv $@.factory.new $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \
+ if [ "$$(stat -c%s $@.factory)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \
+ mv $@.factory $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \
else \
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
fi
endef
define Build/append-md5sum-bin
- $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
+ $(MKHASH) md5 $@ | sed 's/../\\\\x&/g' |\
xargs echo -ne >> $@
endef
rm -rf $@.uImage $@.rootfs
endef
-# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
-# sysupgrade, as otherwise it will implant the old configuration from
-# OEM firmware when writing rootfs from factory.bin
-define Build/engenius-tar-gz
- -[ -f "$@" ] && \
- mkdir -p $@.tmp && \
- echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
- echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
- $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
- $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
- $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
- $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- -C $@.tmp . | gzip -9n > $@ && \
- rm -rf $@.tmp
-endef
-
define Build/mkdapimg2
$(STAGING_DIR_HOST)/bin/mkdapimg2 \
-i $@ -o $@.new \
endef
TARGET_DEVICES += adtran_bsap1840
+define Device/airtight_c-75
+ SOC := qca9550
+ DEVICE_VENDOR := AirTight Networks
+ DEVICE_MODEL := C-75
+ DEVICE_ALT0_VENDOR := Mojo Networks
+ DEVICE_ALT0_MODEL := C-75
+ DEVICE_ALT1_VENDOR := WatchGuard
+ DEVICE_ALT1_MODEL := AP320
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
+ IMAGE_SIZE := 32320k
+ KERNEL_SIZE := 15936k
+endef
+TARGET_DEVICES += airtight_c-75
+
define Device/alfa-network_ap121f
SOC := ar9331
DEVICE_VENDOR := ALFA Network
TARGET_DEVICES += alfa-network_r36a
define Device/allnet_all-wap02860ac
+ $(Device/senao_loader_okli)
SOC := qca9558
DEVICE_VENDOR := ALLNET
DEVICE_MODEL := ALL-WAP02860AC
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
- IMAGE_SIZE := 13120k
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-allwap02860ac
endef
TARGET_DEVICES += allnet_all-wap02860ac
endef
TARGET_DEVICES += avm_fritzdvbc
-define Device/belkin_f9j1108-v2
+define Device/belkin_f9x-v2
SOC := qca9558
DEVICE_VENDOR := Belkin
- DEVICE_MODEL := F9J1108 v2 (AC1750 DB Wi-Fi)
IMAGE_SIZE := 14464k
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2 \
kmod-usb3 kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | \
- edimax-headers F9J1108v1 BR-6679BAC | pad-to $$$$(BLOCKSIZE)
+ edimax-headers $$$$(EDIMAX_HEADER_MAGIC) $$$$(EDIMAX_HEADER_MODEL) | \
+ pad-to $$$$(BLOCKSIZE)
+endef
+
+define Device/belkin_f9j1108-v2
+ $(Device/belkin_f9x-v2)
+ DEVICE_MODEL := F9J1108 v2 (AC1750 DB Wi-Fi)
+ EDIMAX_HEADER_MAGIC := F9J1108v1
+ EDIMAX_HEADER_MODEL := BR-6679BAC
endef
TARGET_DEVICES += belkin_f9j1108-v2
+define Device/belkin_f9k1115-v2
+ $(Device/belkin_f9x-v2)
+ DEVICE_MODEL := F9K1115 v2 (AC1750 DB Wi-Fi)
+ EDIMAX_HEADER_MAGIC := eDiMaX
+ EDIMAX_HEADER_MODEL := F9K1115V2
+endef
+TARGET_DEVICES += belkin_f9k1115-v2
+
define Device/buffalo_bhr-4grv
$(Device/buffalo_common)
SOC := ar7242
endef
TARGET_DEVICES += buffalo_wzr-hp-ag300h
+define Device/buffalo_wzr-hp-g300nh
+ $(Device/buffalo_common)
+ SOC := ar9132
+ BUFFALO_PRODUCT := WZR-HP-G300NH
+ BUFFALO_HWVER := 1
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-gpio-nxp-74hc153
+ BLOCKSIZE := 128k
+ IMAGE_SIZE := 32128k
+ SUPPORTED_DEVICES += wzr-hp-g300nh
+endef
+
+define Device/buffalo_wzr-hp-g300nh-rb
+ $(Device/buffalo_wzr-hp-g300nh)
+ DEVICE_MODEL := WZR-HP-G300NH (RTL8366RB switch)
+endef
+TARGET_DEVICES += buffalo_wzr-hp-g300nh-rb
+
+define Device/buffalo_wzr-hp-g300nh-s
+ $(Device/buffalo_wzr-hp-g300nh)
+ DEVICE_MODEL := WZR-HP-G300NH (RTL8366S switch)
+endef
+TARGET_DEVICES += buffalo_wzr-hp-g300nh-s
+
define Device/buffalo_wzr-hp-g302h-a1a0
$(Device/buffalo_common)
SOC := ar7242
endef
TARGET_DEVICES += dlink_dap-1365-a1
+define Device/dlink_dap-2xxx
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-offset 6144k 160 | \
+ append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size
+ IMAGE/sysupgrade.bin := append-kernel | mkwrggimg | \
+ pad-to $$$$(BLOCKSIZE) | append-rootfs | append-metadata | check-size
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
+ KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
+endef
+
+define Device/dlink_dap-2230-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9533
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-2230
+ DEVICE_VARIANT := A1
+ IMAGE_SIZE := 15232k
+ DAP_SIGNATURE := wapn31_dkbs_dap2230
+endef
+TARGET_DEVICES += dlink_dap-2230-a1
+
+define Device/dlink_dap-2660-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9557
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-2660
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15232k
+ DAP_SIGNATURE := wapac09_dkbs_dap2660
+endef
+TARGET_DEVICES += dlink_dap-2660-a1
+
+define Device/dlink_dap-2680-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9558
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-2680
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15232k
+ DAP_SIGNATURE := wapac36_dkbs_dap2680
+endef
+TARGET_DEVICES += dlink_dap-2680-a1
+
define Device/dlink_dap-2695-a1
SOC := qca9558
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
endef
TARGET_DEVICES += dlink_dap-2695-a1
+define Device/dlink_dap-3320-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9533
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-3320
+ DEVICE_VARIANT := A1
+ IMAGE_SIZE := 15296k
+ DAP_SIGNATURE := wapn29_dkbs_dap3320
+endef
+TARGET_DEVICES += dlink_dap-3320-a1
+
+define Device/dlink_dap-3662-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9558
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-3662
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15296k
+ DAP_SIGNATURE := wapac11_dkbs_dap3662
+endef
+TARGET_DEVICES += dlink_dap-3662-a1
+
define Device/dlink_dch-g020-a1
SOC := qca9531
DEVICE_VENDOR := D-Link
endef
TARGET_DEVICES += embeddedwireless_dorin
-define Device/engenius_loader_okli
+define Device/engenius_eap1200h
+ $(Device/senao_loader_okli)
+ SOC := qca9557
DEVICE_VENDOR := EnGenius
- KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
- LOADER_TYPE := bin
- COMPILE := loader-$(1).bin loader-$(1).uImage
- COMPILE/loader-$(1).bin := loader-okli-compile
- COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
- uImage lzma
- IMAGES += factory.bin
- IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
- append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
- check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
+ DEVICE_MODEL := EAP1200H
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := ar71xx-generic-eap1200h
endef
+TARGET_DEVICES += engenius_eap1200h
define Device/engenius_eap300-v2
- $(Device/engenius_loader_okli)
+ $(Device/senao_loader_okli)
SOC := ar9341
+ DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP300
DEVICE_VARIANT := v2
- IMAGE_SIZE := 12032k
- LOADER_FLASH_OFFS := 0x230000
- ENGENIUS_IMGNAME := senao-eap300v2
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-eap300v2
endef
TARGET_DEVICES += engenius_eap300-v2
+define Device/engenius_eap600
+ $(Device/senao_loader_okli)
+ SOC := ar9344
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := EAP600
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-eap600
+endef
+TARGET_DEVICES += engenius_eap600
+
+define Device/engenius_ecb1200
+ SOC := qca9557
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := ECB1200
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15680k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x101 -p 0x6e -t 2
+endef
+TARGET_DEVICES += engenius_ecb1200
+
define Device/engenius_ecb1750
SOC := qca9558
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ECB1750
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
IMAGE_SIZE := 15680k
+ IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | \
senao-header -r 0x101 -p 0x6d -t 2
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
- append-metadata | check-size
endef
TARGET_DEVICES += engenius_ecb1750
-define Device/engenius_enh202-v1
- $(Device/engenius_loader_okli)
- SOC := ar7240
- DEVICE_MODEL := ENH202
- DEVICE_VARIANT := v1
- DEVICE_PACKAGES := rssileds
- IMAGE_SIZE := 4864k
- LOADER_FLASH_OFFS := 0x1b0000
- ENGENIUS_IMGNAME := senao-enh202
+define Device/engenius_ecb600
+ $(Device/senao_loader_okli)
+ SOC := ar9344
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := ECB600
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-ecb600
endef
-TARGET_DEVICES += engenius_enh202-v1
+TARGET_DEVICES += engenius_ecb600
define Device/engenius_ens202ext-v1
- $(Device/engenius_loader_okli)
+ $(Device/senao_loader_okli)
SOC := ar9341
+ DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENS202EXT
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
- IMAGE_SIZE := 12032k
- LOADER_FLASH_OFFS := 0x230000
- ENGENIUS_IMGNAME := senao-ens202ext
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-ens202ext
endef
TARGET_DEVICES += engenius_ens202ext-v1
+define Device/engenius_enstationac-v1
+ $(Device/senao_loader_okli)
+ SOC := qca9557
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := EnStationAC
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct rssileds
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := ar71xx-generic-enstationac
+endef
+TARGET_DEVICES += engenius_enstationac-v1
+
define Device/engenius_epg5000
SOC := qca9558
DEVICE_VENDOR := EnGenius
DEVICE_VENDOR := eTactica
DEVICE_MODEL := EG200
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
- kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
+ kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += rme-eg200
endef
endef
TARGET_DEVICES += glinet_gl-mifi
+define Device/glinet_gl-usb150
+ SOC := ar9331
+ DEVICE_VENDOR := GL.iNET
+ DEVICE_MODEL := GL-USB150
+ IMAGE_SIZE := 16000k
+ SUPPORTED_DEVICES += gl-usb150
+endef
+TARGET_DEVICES += glinet_gl-usb150
+
define Device/glinet_gl-x750
SOC := qca9531
DEVICE_VENDOR := GL.iNet
endef
TARGET_DEVICES += librerouter_librerouter-v1
+define Device/meraki_mr12
+ SOC := ar7242
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := MR12
+ IMAGE_SIZE := 15616k
+ DEVICE_PACKAGES := kmod-owl-loader rssileds
+ SUPPORTED_DEVICES += mr12
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Partitions differ from ar71xx version of MR12. Image format is incompatible. \
+ To use sysupgrade, you must change /lib/update/common.sh::get_image to prepend 128K zeroes to this image, \
+ and change the bootcmd in u-boot to "bootm 0xbf0a0000". After that, you can use "sysupgrade -F -n". \
+ Make sure you do not keep your old config, as ethernet setup is not compatible either. \
+ For more details, see the OpenWrt Wiki: https://openwrt.org/toh/meraki/MR12, \
+ or the commit message of the MR12 ath79 port on git.openwrt.org.
+endef
+TARGET_DEVICES += meraki_mr12
+
define Device/meraki_mr16
SOC := ar7161
DEVICE_VENDOR := Meraki
endef
TARGET_DEVICES += ocedo_ursus
+define Device/openmesh_common_64k
+ DEVICE_VENDOR := OpenMesh
+ DEVICE_PACKAGES := uboot-envtools
+ IMAGE_SIZE := 7808k
+ BLOCKSIZE := 64k
+ OPENMESH_CE_TYPE :=
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
+ pad-to $$(BLOCKSIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
+ openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
+endef
+
+define Device/openmesh_common_256k
+ DEVICE_VENDOR := OpenMesh
+ DEVICE_PACKAGES := uboot-envtools
+ IMAGE_SIZE := 7168k
+ BLOCKSIZE := 256k
+ OPENMESH_CE_TYPE :=
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
+ pad-to $$(BLOCKSIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
+ openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
+endef
+
+define Device/openmesh_mr600-v1
+ $(Device/openmesh_common_64k)
+ SOC := ar9344
+ DEVICE_MODEL := MR600
+ DEVICE_VARIANT := v1
+ OPENMESH_CE_TYPE := MR600
+ SUPPORTED_DEVICES += mr600
+endef
+TARGET_DEVICES += openmesh_mr600-v1
+
+define Device/openmesh_mr600-v2
+ $(Device/openmesh_common_64k)
+ SOC := ar9344
+ DEVICE_MODEL := MR600
+ DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := MR600
+ SUPPORTED_DEVICES += mr600v2
+endef
+TARGET_DEVICES += openmesh_mr600-v2
+
+define Device/openmesh_mr900-v1
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR900
+ DEVICE_VARIANT := v1
+ OPENMESH_CE_TYPE := MR900
+ SUPPORTED_DEVICES += mr900
+endef
+TARGET_DEVICES += openmesh_mr900-v1
+
+define Device/openmesh_mr900-v2
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR900
+ DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := MR900
+ SUPPORTED_DEVICES += mr900v2
+endef
+TARGET_DEVICES += openmesh_mr900-v2
+
+define Device/openmesh_mr1750-v1
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR1750
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ OPENMESH_CE_TYPE := MR1750
+ SUPPORTED_DEVICES += mr1750
+endef
+TARGET_DEVICES += openmesh_mr1750-v1
+
+define Device/openmesh_mr1750-v2
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR1750
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ OPENMESH_CE_TYPE := MR1750
+ SUPPORTED_DEVICES += mr1750v2
+endef
+TARGET_DEVICES += openmesh_mr1750-v2
+
+define Device/openmesh_om2p-v2
+ $(Device/openmesh_common_256k)
+ SOC := ar9330
+ DEVICE_MODEL := OM2P
+ DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := OM2P
+ SUPPORTED_DEVICES += om2pv2
+endef
+TARGET_DEVICES += openmesh_om2p-v2
+
+define Device/openmesh_om2p-v4
+ $(Device/openmesh_common_256k)
+ SOC := qca9533
+ DEVICE_MODEL := OM2P
+ DEVICE_VARIANT := v4
+ OPENMESH_CE_TYPE := OM2P
+ SUPPORTED_DEVICES += om2pv4
+endef
+TARGET_DEVICES += openmesh_om2p-v4
+
+define Device/openmesh_om2p-hs-v1
+ $(Device/openmesh_common_256k)
+ SOC := ar9341
+ DEVICE_MODEL := OM2P-HS
+ DEVICE_VARIANT := v1
+ OPENMESH_CE_TYPE := OM2P
+ SUPPORTED_DEVICES += om2p-hs
+endef
+TARGET_DEVICES += openmesh_om2p-hs-v1
+
+define Device/openmesh_om2p-hs-v2
+ $(Device/openmesh_common_256k)
+ SOC := ar9341
+ DEVICE_MODEL := OM2P-HS
+ DEVICE_VARIANT := v2
+ OPENMESH_CE_TYPE := OM2P
+ SUPPORTED_DEVICES += om2p-hsv2
+endef
+TARGET_DEVICES += openmesh_om2p-hs-v2
+
+define Device/openmesh_om2p-hs-v3
+ $(Device/openmesh_common_256k)
+ SOC := ar9341
+ DEVICE_MODEL := OM2P-HS
+ DEVICE_VARIANT := v3
+ OPENMESH_CE_TYPE := OM2P
+ SUPPORTED_DEVICES += om2p-hsv3
+endef
+TARGET_DEVICES += openmesh_om2p-hs-v3
+
+define Device/openmesh_om2p-hs-v4
+ $(Device/openmesh_common_256k)
+ SOC := qca9533
+ DEVICE_MODEL := OM2P-HS
+ DEVICE_VARIANT := v4
+ OPENMESH_CE_TYPE := OM2P
+ SUPPORTED_DEVICES += om2p-hsv4
+endef
+TARGET_DEVICES += openmesh_om2p-hs-v4
+
+define Device/openmesh_om2p-lc
+ $(Device/openmesh_common_256k)
+ SOC := ar9330
+ DEVICE_MODEL := OM2P-LC
+ OPENMESH_CE_TYPE := OM2P
+ SUPPORTED_DEVICES += om2p-lc
+endef
+TARGET_DEVICES += openmesh_om2p-lc
+
+define Device/openmesh_om5p
+ $(Device/openmesh_common_64k)
+ SOC := ar9344
+ DEVICE_MODEL := OM5P
+ OPENMESH_CE_TYPE := OM5P
+ SUPPORTED_DEVICES += om5p
+endef
+TARGET_DEVICES += openmesh_om5p
+
define Device/openmesh_om5p-ac-v2
SOC := qca9558
DEVICE_VENDOR := OpenMesh
endef
TARGET_DEVICES += pisen_wmm003n
+define Device/plasmacloud_pa300-common
+ SOC := qca9533
+ DEVICE_VENDOR := Plasma Cloud
+ DEVICE_PACKAGES := uboot-envtools
+ IMAGE_SIZE := 7168k
+ BLOCKSIZE := 64k
+ IMAGES += factory.bin
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE)
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA300
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+endef
+
+define Device/plasmacloud_pa300
+ $(Device/plasmacloud_pa300-common)
+ DEVICE_MODEL := PA300
+endef
+TARGET_DEVICES += plasmacloud_pa300
+
+define Device/plasmacloud_pa300e
+ $(Device/plasmacloud_pa300-common)
+ DEVICE_MODEL := PA300E
+endef
+TARGET_DEVICES += plasmacloud_pa300e
+
define Device/qihoo_c301
$(Device/seama)
SOC := ar9344
DEVICE_MODEL := WD323
IMAGE_SIZE := 16000k
DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio kmod-rtc-pcf8563 \
- kmod-usb-serial kmod-usb-serial-cp210x uqmi
+ kmod-usb-serial-cp210x uqmi
endef
TARGET_DEVICES += zbtlink_zbt-wd323
projects / openwrt / staging / chunkeey.git / blobdiff