DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
-DEVICE_VARS += OPENMESH_CE_TYPE
-
-define Build/add-elecom-factory-initramfs
- $(eval edimax_model=$(word 1,$(1)))
- $(eval product=$(word 2,$(1)))
-
- $(STAGING_DIR_HOST)/bin/mkedimaximg \
- -b -s CSYS -m $(edimax_model) \
- -f 0x70000 -S 0x01100000 \
- -i $@ -o $@.factory
-
- $(call Build/elecom-product-header,$(product) $@.factory)
-
- if [ "$$(stat -c%s $@.factory)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \
- mv $@.factory $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \
- else \
- echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
- fi
-endef
+DEVICE_VARS += OPENMESH_CE_TYPE ZYXEL_MODEL_STRING
+DEVICE_VARS += SUPPORTED_TELTONIKA_DEVICES
define Build/addpattern
-$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \
@mv $@.new $@
endef
+metadata_json_teltonika = \
+ '{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
+ "metadata_version": "1.1", \
+ "compat_version": "$(call json_quote,$(compat_version))", \
+ "version":"$(call json_quote,$(VERSION_DIST))-$(call json_quote,$(VERSION_NUMBER))-$(call json_quote,$(REVISION))", \
+ "device_code": [".*"], \
+ "hwver": [".*"], \
+ "batch": [".*"], \
+ "serial": [".*"], \
+ $(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
+ $(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
+ [$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma) \
+ "supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
+ $(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma)) \
+ "version_wrt": { \
+ "dist": "$(call json_quote,$(VERSION_DIST))", \
+ "version": "$(call json_quote,$(VERSION_NUMBER))", \
+ "revision": "$(call json_quote,$(REVISION))", \
+ "target": "$(call json_quote,$(TARGETID))", \
+ "board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
+ }, \
+ "hw_support": {}, \
+ "hw_mods": {} \
+ }'
+
+define Build/append-metadata-teltonika
+ echo $(call metadata_json_teltonika) | fwtool -I - $@
+endef
+
define Build/wrgg-pad-rootfs
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
endef
+define Build/zyxel-tar-bz2
+ mkdir -p $@.tmp
+ mv $@ $@.tmp/$(word 2,$(1))
+ cp $(KDIR)/loader-$(DEVICE_NAME).uImage $@.tmp/$(word 1,$(1)).lzma.uImage
+ $(TAR) -cjf $@ -C $@.tmp .
+ rm -rf $@.tmp
+endef
define Device/seama
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
DEVICE_MODEL := RP-AC51
IMAGE_SIZE := 16000k
IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct \
-swconfig
endef
define Device/devolo_dlan-pro-1200plus-ac
SOC := ar9344
- DEVICE_VENDOR := Devolo
+ DEVICE_VENDOR := devolo
DEVICE_MODEL := dLAN pro 1200+ WiFi ac
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
IMAGE_SIZE := 15872k
define Device/devolo_magic-2-wifi
SOC := ar9344
- DEVICE_VENDOR := Devolo
+ DEVICE_VENDOR := devolo
DEVICE_MODEL := Magic 2 WiFi
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
IMAGE_SIZE := 15872k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-825
DEVICE_VARIANT := B1
- IMAGE_SIZE := 6208k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
- check-size | append-metadata
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-leds-reset kmod-owl-loader kmod-switch-rtl8366s
- SUPPORTED_DEVICES += dir-825-b1
+ IMAGE_SIZE := 7808k
+ FACTORY_SIZE := 6144k
+ IMAGES += factory.bin
+ IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs | check-size $$$$(FACTORY_SIZE) | pad-to $$$$(FACTORY_SIZE) | \
+ append-string 01AP94-AR7161-RT-080619-00
endef
TARGET_DEVICES += dlink_dir-825-b1
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-1750GHBK2-I/C
IMAGE_SIZE := 15808k
- KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \
- add-elecom-factory-initramfs RN68 WRC-1750GHBK2
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.bin
+ ARTIFACT/initramfs-factory.bin := append-image initramfs-kernel.bin | \
+ pad-to 2 | edimax-header -b -s CSYS -m RN68 -f 0x70000 -S 0x01100000 | \
+ elecom-product-header WRC-1750GHBK2 | check-size
+endif
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += elecom_wrc-1750ghbk2-i
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-300GHBK2-I
IMAGE_SIZE := 7616k
- KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \
- add-elecom-factory-initramfs RN51 WRC-300GHBK2-I
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.bin
+ ARTIFACT/initramfs-factory.bin := append-image initramfs-kernel.bin | \
+ pad-to 2 | edimax-header -b -s CSYS -m RN51 -f 0x70000 -S 0x01100000 | \
+ elecom-product-header WRC-300GHBK2-I | check-size
+endif
endef
TARGET_DEVICES += elecom_wrc-300ghbk2-i
endef
TARGET_DEVICES += engenius_eap1200h
+define Device/engenius_eap1750h
+ $(Device/senao_loader_okli)
+ SOC := qca9558
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := EAP1750H
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := ar71xx-generic-eap1750h
+endef
+TARGET_DEVICES += engenius_eap1750h
+
define Device/engenius_eap300-v2
$(Device/senao_loader_okli)
SOC := ar9341
endef
TARGET_DEVICES += etactica_eg200
+define Device/extreme-networks_ws-ap3805i
+ SOC := qca9557
+ BLOCKSIZE := 256k
+ DEVICE_VENDOR := Extreme Networks
+ DEVICE_MODEL := WS-AP3805i
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 29440k
+endef
+TARGET_DEVICES += extreme-networks_ws-ap3805i
+
+define Device/fortinet_fap-221-b
+ $(Device/senao_loader_okli)
+ SOC := ar9344
+ DEVICE_VENDOR := Fortinet
+ DEVICE_MODEL := FAP-221-B
+ FACTORY_IMG_NAME := FP221B-9.99-AP-build999-999999-patch99
+ IMAGE_SIZE := 9216k
+ LOADER_FLASH_OFFS := 0x040000
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | \
+ check-size | pad-to $$$$(IMAGE_SIZE) | \
+ append-loader-okli-uimage $(1) | pad-to 10944k | \
+ gzip-filename $$$$(FACTORY_IMG_NAME)
+endef
+TARGET_DEVICES += fortinet_fap-221-b
+
define Device/glinet_6408
$(Device/tplink-8mlzma)
SOC := ar9331
endef
TARGET_DEVICES += joyit_jt-or750i
+define Device/kuwfi_c910
+ $(Device/loader-okli-uimage)
+ SOC := qca9533
+ DEVICE_VENDOR := KuWFi
+ DEVICE_MODEL := C910
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-net-cdc-ether comgt-ncm
+ LOADER_FLASH_OFFS := 0x50000
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+ IMAGE_SIZE := 15936k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
+ append-loader-okli-uimage $(1) | pad-to 64k
+endef
+TARGET_DEVICES += kuwfi_c910
+
define Device/letv_lba-047-ch
$(Device/loader-okli-uimage)
SOC := qca9531
endef
TARGET_DEVICES += nec_wg800hp
-define Device/netgear_ex6400_ex7300
- $(Device/netgear_generic)
+define Device/netgear_ex7300
SOC := qca9558
- UIMAGE_MAGIC := 0x27051956
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := EX7300
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := EX6400
NETGEAR_BOARD_ID := EX7300series
NETGEAR_HW_ID := 29765104+16+0+128
IMAGE_SIZE := 15552k
+ IMAGES += factory.img
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
netgear-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca99x0-ct
-endef
-
-define Device/netgear_ex6400
- $(Device/netgear_ex6400_ex7300)
- DEVICE_MODEL := EX6400
-endef
-TARGET_DEVICES += netgear_ex6400
-
-define Device/netgear_ex7300
- $(Device/netgear_ex6400_ex7300)
- DEVICE_MODEL := EX7300
+ SUPPORTED_DEVICES += netgear,ex6400
endef
TARGET_DEVICES += netgear_ex7300
define Device/netgear_ex7300-v2
- $(Device/netgear_generic)
SOC := qcn5502
+ DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EX7300
DEVICE_VARIANT := v2
- UIMAGE_MAGIC := 0x27051956
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := EX6250
+ DEVICE_ALT1_VENDOR := NETGEAR
+ DEVICE_ALT1_MODEL := EX6400
+ DEVICE_ALT1_VARIANT := v2
+ DEVICE_ALT2_VENDOR := NETGEAR
+ DEVICE_ALT2_MODEL := EX6410
+ DEVICE_ALT3_VENDOR := NETGEAR
+ DEVICE_ALT3_MODEL := EX6420
+ DEVICE_ALT4_VENDOR := NETGEAR
+ DEVICE_ALT4_MODEL := EX7320
NETGEAR_BOARD_ID := EX7300v2series
NETGEAR_HW_ID := 29765907+16+0+128
IMAGE_SIZE := 14528k
+ IMAGES += factory.img
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
netgear-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
$(Device/netgear_generic)
SOC := ar7161
DEVICE_MODEL := WNDAP360
- DEVICE_PACKAGES := kmod-leds-reset kmod-owl-loader
+ DEVICE_PACKAGES := kmod-leds-reset
IMAGE_SIZE := 7744k
BLOCKSIZE := 256k
KERNEL := kernel-bin | append-dtb | gzip | uImage gzip
DEVICE_MODEL := Koala
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
SUPPORTED_DEVICES += koala
- IMAGE_SIZE := 7424k
+ IMAGE_SIZE := 14848k
endef
TARGET_DEVICES += ocedo_koala
SOC := ar9344
DEVICE_VENDOR := Ocedo
DEVICE_MODEL := Raccoon
- IMAGE_SIZE := 7424k
+ IMAGE_SIZE := 14848k
endef
TARGET_DEVICES += ocedo_raccoon
DEVICE_VENDOR := Ocedo
DEVICE_MODEL := Ursus
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- IMAGE_SIZE := 7424k
+ IMAGE_SIZE := 14848k
endef
TARGET_DEVICES += ocedo_ursus
endef
TARGET_DEVICES += rosinson_wr818
+define Device/ruckus_common
+ DEVICE_VENDOR := Ruckus
+ LOADER_TYPE := bin
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | uImage none
+endef
+
+define Device/ruckus_zf7025
+ $(Device/ruckus_common)
+ SOC := ar7240
+ DEVICE_MODEL := ZoneFlex 7025
+ IMAGE_SIZE := 15616k
+ BLOCKSIZE := 256k
+endef
+TARGET_DEVICES += ruckus_zf7025
+
+define Device/ruckus_zf73xx_common
+ $(Device/ruckus_common)
+ DEVICE_PACKAGES := -swconfig kmod-usb2 kmod-usb-chipidea2
+ IMAGE_SIZE := 31744k
+endef
+
+define Device/ruckus_zf7321
+ $(Device/ruckus_zf73xx_common)
+ SOC := ar9342
+ DEVICE_MODEL := ZoneFlex 7321[-U]
+endef
+TARGET_DEVICES += ruckus_zf7321
+
+define Device/ruckus_zf7372
+ $(Device/ruckus_zf73xx_common)
+ SOC := ar9344
+ DEVICE_MODEL := ZoneFlex 7352/7372[-E/-U]
+endef
+TARGET_DEVICES += ruckus_zf7372
+
define Device/samsung_wam250
SOC := ar9344
DEVICE_VENDOR := Samsung
endef
TARGET_DEVICES += sitecom_wlr-8100
+define Device/sophos_ap15
+ SOC := qca9558
+ DEVICE_VENDOR := Sophos
+ DEVICE_MODEL := AP15
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 15936k
+endef
+TARGET_DEVICES += sophos_ap15
+
define Device/sophos_ap55
SOC := qca9558
DEVICE_VENDOR := Sophos
endef
TARGET_DEVICES += teltonika_rut230-v1
+define Device/teltonika_rut300
+ SOC := qca9531
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUT300
+ SUPPORTED_TELTONIKA_DEVICES := teltonika,rut30x
+ DEVICE_PACKAGES := -kmod-ath9k -uboot-envtools -wpad-basic-wolfssl kmod-usb2
+ IMAGE_SIZE := 15552k
+ IMAGES += factory.bin
+ IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata-teltonika | \
+ check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | \
+ check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += teltonika_rut300
+
define Device/teltonika_rut955
SOC := ar9344
DEVICE_VENDOR := Teltonika
endef
TARGET_DEVICES += teltonika_rut955-h7v3c0
+define Device/trendnet_tew-673gru
+ SOC := ar7161
+ DEVICE_VENDOR := Trendnet
+ DEVICE_MODEL := TEW-673GRU
+ DEVICE_VARIANT := v1.0R
+ DEVICE_PACKAGES := -uboot-envtools kmod-usb-ohci kmod-usb2 \
+ kmod-owl-loader kmod-switch-rtl8366s
+ IMAGE_SIZE := 7808k
+ FACTORY_SIZE := 6144k
+ IMAGES += factory.bin
+ IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs | check-size $$$$(FACTORY_SIZE) | pad-to $$$$(FACTORY_SIZE) | \
+ append-string AP94-AR7161-RT-080619-01
+endef
+TARGET_DEVICES += trendnet_tew-673gru
+
define Device/trendnet_tew-823dru
SOC := qca9558
DEVICE_VENDOR := Trendnet
endef
TARGET_DEVICES += wallys_dr531
+define Device/watchguard_ap100
+ $(Device/senao_loader_okli)
+ SOC := ar9344
+ DEVICE_VENDOR := WatchGuard
+ DEVICE_MODEL := AP100
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-ap100
+ WATCHGUARD_MAGIC := 82kdlzk2
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ check-size | senao-tar-gz $$$$(SENAO_IMGNAME) | watchguard-cksum $$$$(WATCHGUARD_MAGIC)
+endef
+TARGET_DEVICES += watchguard_ap100
+
+define Device/watchguard_ap200
+ $(Device/senao_loader_okli)
+ SOC := ar9344
+ DEVICE_VENDOR := WatchGuard
+ DEVICE_MODEL := AP200
+ IMAGE_SIZE := 12096k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-ap200
+ WATCHGUARD_MAGIC := 82kdlzk2
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ check-size | senao-tar-gz $$$$(SENAO_IMGNAME) | watchguard-cksum $$$$(WATCHGUARD_MAGIC)
+endef
+TARGET_DEVICES += watchguard_ap200
+
+define Device/watchguard_ap300
+ $(Device/senao_loader_okli)
+ SOC := qca9558
+ DEVICE_VENDOR := WatchGuard
+ DEVICE_MODEL := AP300
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 11584k
+ LOADER_FLASH_OFFS := 0x220000
+ SENAO_IMGNAME := senao-ap300
+ WATCHGUARD_MAGIC := 82kdlzk2
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ check-size | senao-tar-gz $$$$(SENAO_IMGNAME) | watchguard-cksum $$$$(WATCHGUARD_MAGIC)
+endef
+TARGET_DEVICES += watchguard_ap300
+
define Device/wd_mynet-n600
$(Device/seama)
SOC := ar9344
endef
TARGET_DEVICES += zbtlink_zbt-wd323
+define Device/zyxel_nwa11xx
+ $(Device/loader-okli-uimage)
+ SOC := ar9342
+ DEVICE_VENDOR := ZyXEL
+ LOADER_FLASH_OFFS := 0x050000
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+ IMAGE_SIZE := 8192k
+ IMAGES += factory-$$$$(ZYXEL_MODEL_STRING).bin
+ IMAGE/factory-$$$$(ZYXEL_MODEL_STRING).bin := \
+ append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs | pad-to 8192k | check-size | zyxel-tar-bz2 \
+ vmlinux_mi124_f1e mi124_f1e-jffs2 | append-md5sum-bin
+endef
+
+define Device/zyxel_nwa1100-nh
+ $(Device/zyxel_nwa11xx)
+ DEVICE_MODEL := NWA1100
+ DEVICE_VARIANT := NH
+ ZYXEL_MODEL_STRING := AASI
+endef
+TARGET_DEVICES += zyxel_nwa1100-nh
+
+define Device/zyxel_nwa1121-ni
+ $(Device/zyxel_nwa11xx)
+ DEVICE_MODEL := NWA1121
+ DEVICE_VARIANT := NI
+ ZYXEL_MODEL_STRING := AABJ
+endef
+TARGET_DEVICES += zyxel_nwa1121-ni
+
+define Device/zyxel_nwa1123-ac
+ $(Device/zyxel_nwa11xx)
+ DEVICE_MODEL := NWA1123
+ DEVICE_VARIANT := AC
+ ZYXEL_MODEL_STRING := AAOX
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers \
+ ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += zyxel_nwa1123-ac
+
+define Device/zyxel_nwa1123-ni
+ $(Device/zyxel_nwa11xx)
+ DEVICE_MODEL := NWA1123
+ DEVICE_VARIANT := NI
+ ZYXEL_MODEL_STRING := AAEO
+endef
+TARGET_DEVICES += zyxel_nwa1123-ni
+
define Device/zyxel_nbg6616
SOC := qca9557
DEVICE_VENDOR := ZyXEL
projects / openwrt / staging / wigyori.git / blobdiff