ath79: switch some RedBoot based devices to OKLI loader

[openwrt/staging/wigyori.git] / target / linux / ath79 / image / generic.mk

diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index edf6b7ee5e4b9b6f360d4ff9bdc56d6c0081c533..96b073b1b5f8e65b9becdcc557d483626e03d89d 100644 (file)
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -3,6 +3,7 @@ include ./common-netgear.mk
 include ./common-senao.mk
 include ./common-tp-link.mk
 include ./common-yuncore.mk
+include ./common-ubnt.mk
 
 DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
 DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
@@ -896,7 +897,7 @@ define Device/dlink_dap-2680-a1
   DEVICE_VENDOR := D-Link
   DEVICE_MODEL := DAP-2680
   DEVICE_VARIANT := A1
-  DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ath10k-ct
+  DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ath10k-ct
   IMAGE_SIZE := 15232k
   DAP_SIGNATURE := wapac36_dkbs_dap2680
 endef
@@ -1464,16 +1465,25 @@ define Device/jjplus_ja76pf2
   SOC := ar7161
   DEVICE_VENDOR := jjPlus
   DEVICE_MODEL := JA76PF2
-  DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-basic-wolfssl -uboot-envtools fconfig
-  IMAGES += kernel.bin rootfs.bin
-  IMAGE/kernel.bin := append-kernel
-  IMAGE/rootfs.bin := append-rootfs | pad-rootfs
-  IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | \
-       check-size | append-metadata
-  KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
+  DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-basic-wolfssl -uboot-envtools fconfig kmod-hwmon-lm75
+  LOADER_TYPE := bin
+  LOADER_FLASH_OFFS := 0x60000
+  COMPILE := loader-$(1).bin
+  COMPILE/loader-$(1).bin := loader-okli-compile | lzma | pad-to 128k
+  ARTIFACTS := loader.bin
+  ARTIFACT/loader.bin := append-loader-okli $(1)
+  IMAGES += firmware.bin
+  IMAGE/firmware.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
+       append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | check-size
+  IMAGE/sysupgrade.bin := $$(IMAGE/firmware.bin) | \
+       sysupgrade-tar kernel=$$$$(KDIR)/loader-$(1).bin rootfs=$$$$@ | append-metadata
+  KERNEL := kernel-bin | append-dtb | lzma
   KERNEL_INITRAMFS := kernel-bin | append-dtb
-  IMAGE_SIZE := 16000k
-  SUPPORTED_DEVICES += ja76pf2
+  IMAGE_SIZE := 15872k
+  DEVICE_COMPAT_VERSION := 2.0
+  DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (19.07 and 21.02) \
+       due to kernel drivers restrictions. Upgrade via sysupgrade mechanism is one way operation. \
+       Downgrading OpenWrt version will involve usage of bootloader command line interface.
 endef
 TARGET_DEVICES += jjplus_ja76pf2
 
@@ -1654,6 +1664,21 @@ define Device/netgear_ex7300-v2
 endef
 TARGET_DEVICES += netgear_ex7300-v2
 
+define Device/netgear_wndap360
+  $(Device/netgear_generic)
+  SOC := ar7161
+  DEVICE_MODEL := WNDAP360
+  DEVICE_PACKAGES := kmod-leds-reset kmod-owl-loader
+  IMAGE_SIZE := 7744k
+  BLOCKSIZE := 256k
+  KERNEL := kernel-bin | append-dtb | gzip | uImage gzip
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | \
+       check-size | append-metadata
+endef
+TARGET_DEVICES += netgear_wndap360
+
 define Device/netgear_wndr3x00
   $(Device/netgear_generic)
   SOC := ar7161