ath79: Remove kernel 4.14 support

[openwrt/staging/wigyori.git] / target / linux / ath79 / patches-4.14 / 0038-at803x-disable-delays.patch

diff --git a/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch b/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch
deleted file mode 100644 (file)
index cf05d0f..0000000
--- a/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Until upstream commit 6d4cd041f0af("net: phy: at803x: disable delay
-only for RGMII mode"), delays were not disabled on driver probe
-for the Atheros AR803x PHYs, although the RX delay is enabled on
-soft and hard reset.
-
-In addition, the TX delay setting is retained on soft-reset.
-
-This patch disables both delays on config init to align the behavior
-with kernel 5.1 and higher. It can be safely dropped with kernel 5.1.
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -320,6 +320,14 @@ static int at803x_config_init(struct phy
-       if (ret < 0)
-               return ret;
- 
-+      /* Disable RX delay */
-+      at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+                              AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+
-+      /* Disable TX delay */
-+      at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+                              AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+
-       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
-                       phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
-               ret = at803x_enable_rx_delay(phydev);