treewide: remove files for building 5.10 kernel

[openwrt/staging/ldir.git] / target / linux / ath79 / patches-5.10 / 425-at803x-allow-sgmii-aneg-override.patch

diff --git a/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch b/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch
deleted file mode 100644 (file)
index ef1e5a6..0000000
--- a/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Subject: [PATCH] ath79: allow to override AR8033 SGMII aneg status
-
-In order to make the QCA955x SGMII workaround work, the unsuccessful
-SGMII autonegotiation on the AR8033 should not block the PHY
-state-machine.
-
-Otherwise, the ag71xx driver never becomes aware of the copper-side
-link-establishment and the workaround is never executed.
-
-Submitted-by: David Bauer <mail@david-bauer.net>
-Submitted-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
----
- drivers/net/phy/at803x.c-override.patch          | 7 +++++++
- 1 files changed, 7 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -959,6 +959,13 @@ static int at803x_aneg_done(struct phy_d
-       if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
-               phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
-               aneg_done = 0;
-+#ifdef CONFIG_OF_MDIO
-+              if (phydev->mdio.dev.of_node &&
-+                              of_property_read_bool(phydev->mdio.dev.of_node,
-+                              "at803x-override-sgmii-link-check")) {
-+                      aneg_done = 1;
-+              }
-+#endif
-       }
-       /* switch back to copper page */
-       phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);