ath79: rename patches directory and kernel config from 6.1 to 6.6

[openwrt/openwrt.git] / target / linux / ath79 / patches-6.1 / 911-mikrotik-rb91x.patch

diff --git a/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch b/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch
deleted file mode 100644 (file)
index 677428f..0000000
--- a/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Denis Kalashnikov <denis281089@gmail.com>
-Subject: [PATCH] ath79: add support for reset key on MikroTik RB912UAG-2HPnD
-
-On MikroTik RB91x board series a reset key shares SoC gpio
-line #15 with NAND ALE and NAND IO7. So we need a custom
-gpio driver to manage this non-trivial connection schema.
-Also rb91x-nand needs to have an ability to disable a polling
-of the key while it works with NAND.
-
-While we've been integrating rb91x-key into a firmware, we've
-figured out that:
-* In the gpio-latch driver we need to add a "cansleep" suffix to
-several gpiolib calls,
-* When gpio-latch and rb91x-nand fail to get a gpio and an error
-is -EPROBE_DEFER, they shouldn't report about this, since this
-actually is not an error and occurs when the gpio-latch probe
-function is called before the rb91x-key probe.
-We fix these related things here too.
-
-Submitted-by: Denis Kalashnikov <denis281089@gmail.com>
-Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
----
- drivers/gpio/Kconfig                          | 11 +++++++++++
- drivers/gpio/Makefile                         |  2 ++
- drivers/mtd/nand/raw/Kconfig                  |  6 ++++++
- drivers/mtd/nand/raw/Makefile                 |  1 +
- 7 files changed, 20 insertions(+)
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -368,6 +368,12 @@ config GPIO_IXP4XX
- 
-         If unsure, say N.
- 
-+config GPIO_LATCH_MIKROTIK
-+      tristate "MikroTik RouterBOARD GPIO latch support"
-+      depends on ATH79
-+      help
-+        GPIO driver for latch on some MikroTik RouterBOARDs.
-+
- config GPIO_LOGICVC
-       tristate "Xylon LogiCVC GPIO support"
-       depends on MFD_SYSCON && OF
-@@ -544,6 +550,10 @@ config GPIO_ROCKCHIP
-       help
-         Say yes here to support GPIO on Rockchip SoCs.
- 
-+config GPIO_RB91X_KEY
-+      tristate "MikroTik RB91x board series reset key support"
-+      depends on ATH79
-+
- config GPIO_SAMA5D2_PIOBU
-       tristate "SAMA5D2 PIOBU GPIO support"
-       depends on MFD_SYSCON
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -76,6 +76,7 @@ obj-$(CONFIG_GPIO_IT87)                      += gpio-it87.o
- obj-$(CONFIG_GPIO_IXP4XX)             += gpio-ixp4xx.o
- obj-$(CONFIG_GPIO_JANZ_TTL)           += gpio-janz-ttl.o
- obj-$(CONFIG_GPIO_KEMPLD)             += gpio-kempld.o
-+obj-$(CONFIG_GPIO_LATCH_MIKROTIK)     += gpio-latch-mikrotik.o
- obj-$(CONFIG_GPIO_LOGICVC)            += gpio-logicvc.o
- obj-$(CONFIG_GPIO_LOONGSON1)          += gpio-loongson1.o
- obj-$(CONFIG_GPIO_LOONGSON)           += gpio-loongson.o
-@@ -124,6 +125,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)   += gpio
- obj-$(CONFIG_GPIO_PXA)                        += gpio-pxa.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)    += gpio-raspberrypi-exp.o
- obj-$(CONFIG_GPIO_RB4XX)              += gpio-rb4xx.o
-+obj-$(CONFIG_GPIO_RB91X_KEY)          += gpio-rb91x-key.o
- obj-$(CONFIG_GPIO_RC5T583)            += gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RCAR)                       += gpio-rcar.o
- obj-$(CONFIG_GPIO_RDA)                        += gpio-rda.o
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -572,4 +572,10 @@ config MTD_NAND_RB4XX
-         Enables support for the NAND flash chip on Mikrotik Routerboard
-         RB4xx series.
- 
-+config MTD_NAND_RB91X
-+      tristate "MikroTik RB91x NAND driver support"
-+      depends on ATH79 && MTD_RAW_NAND
-+      help
-+        Enables support for the NAND flash chip on MikroTik RB91x series.
-+
- endif # MTD_RAW_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_MTD_NAND_PL35X)         += pl35x-n
- obj-$(CONFIG_MTD_NAND_RENESAS)                += renesas-nand-controller.o
- obj-$(CONFIG_MTD_NAND_AR934X)         += ar934x_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX)          += nand_rb4xx.o
-+obj-$(CONFIG_MTD_NAND_RB91X)          += rb91x_nand.o
- 
- nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_onfi.o