ath79: move ubnt-xm 64M RAM boards back to generic

[openwrt/staging/wigyori.git] / target / linux / ath79 / tiny / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index 49fccc0..836d119
--- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 
 . /lib/functions/system.sh
 . /lib/functions/uci-defaults.sh
@@ -8,21 +7,64 @@ ath79_setup_interfaces()
        local board="$1"
 
        case "$board" in
+       buffalo,whr-g301n)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       dlink,dir-615-e4|\
+       netgear,wnr1000-v2|\
+       netgear,wnr2000-v3|\
+       netgear,wnr612-v2|\
+       on,n150r|\
+       tplink,tl-wr740n-v1|\
+       tplink,tl-wr740n-v3|\
+       tplink,tl-wr741-v1|\
+       tplink,tl-wr743nd-v1|\
+       tplink,tl-wr841-v5|\
+       tplink,tl-wr941-v4)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+               ;;
+       engenius,eap350-v1|\
+       engenius,ecb350-v1|\
        pqi,air-pen|\
        tplink,tl-mr10u|\
        tplink,tl-mr3020-v1|\
        tplink,tl-mr3040-v2|\
+       tplink,tl-wa701nd-v1|\
+       tplink,tl-wa730re-v1|\
+       tplink,tl-wa801nd-v1|\
+       tplink,tl-wa801nd-v3|\
+       tplink,tl-wa801nd-v4|\
+       tplink,tl-wa830re-v1|\
+       tplink,tl-wa850re-v1|\
+       tplink,tl-wa850re-v2|\
+       tplink,tl-wa860re-v1|\
+       tplink,tl-wa901nd-v1|\
        tplink,tl-wa901nd-v2|\
-       tplink,tl-wr703n)
+       tplink,tl-wa901nd-v3|\
+       tplink,tl-wa901nd-v4|\
+       tplink,tl-wa901nd-v5|\
+       tplink,tl-wr703n|\
+       tplink,tl-wr802n-v1|\
+       tplink,tl-wr802n-v2|\
+       ubnt,bullet-m-ar7240|\
+       ubnt,bullet-m-ar7241|\
+       ubnt,nanobridge-m|\
+       ubnt,picostation-m|\
+       ubnt,nanostation-loco-m)
                ucidef_set_interface_lan "eth0"
                ;;
-       buffalo,whr-g301n)
-               ucidef_set_interface_wan "eth0"
+       engenius,enh202-v1)
+               ucidef_set_interface_lan "eth0"
                ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+                       "0@eth1" "4:lan:1"
                ;;
        tplink,tl-mr3220-v1|\
        tplink,tl-mr3420-v1|\
+       tplink,tl-mr3420-v3|\
        tplink,tl-wr841-v7|\
        tplink,tl-wr841-v9|\
        tplink,tl-wr841-v10|\
@@ -30,40 +72,44 @@ ath79_setup_interfaces()
        tplink,tl-wr841-v12|\
        tplink,tl-wr940n-v3|\
        tplink,tl-wr940n-v4|\
+       tplink,tl-wr940n-v6|\
        tplink,tl-wr941nd-v6)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
-       netgear,wnr1000-v2|\
-       netgear,wnr2000-v3|\
-       netgear,wnr612-v2|\
-       on,n150r|\
-       tplink,tl-wr740n-v1|\
-       tplink,tl-wr740n-v3|\
-       tplink,tl-wr741-v1|\
-       tplink,tl-wr743nd-v1|\
-       tplink,tl-wr841-v5|\
-       tplink,tl-wr941-v4)
-               ucidef_set_interface_wan "eth0"
-               ucidef_add_switch "switch0" \
-               "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-               ;;
-       tplink,tl-wr941n-v7-cn)
-               ucidef_add_switch "switch0" \
-                       "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
-               ;;
        tplink,tl-mr3420-v2|\
        tplink,tl-wr740n-v4|\
+       tplink,tl-wr740n-v5|\
        tplink,tl-wr741nd-v4|\
-       tplink,tl-wr841-v8)
+       tplink,tl-wr841-v8|\
+       tplink,tl-wr941nd-v5)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
                ;;
+       tplink,tl-wpa8630p-v2-int|\
+       tplink,tl-wpa8630p-v2.0-eu|\
+       tplink,tl-wpa8630p-v2.1-eu)
+               # port 5 (internal) is the power-line port
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
+               ;;
        tplink,tl-wr941-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
+       tplink,tl-wr941n-v7-cn)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+               ;;
+       ubnt,airrouter)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       ubnt,nanostation-m)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ;;
        *)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ;;
@@ -75,6 +121,21 @@ ath79_setup_macs()
        local board="$1"
 
        case "$board" in
+       dlink,dir-615-e4)
+               lan_mac=$(mtd_get_mac_ascii "nvram" "lan_mac")
+               wan_mac=$(mtd_get_mac_ascii "nvram" "wan_mac")
+               label_mac=$wan_mac
+               ;;
+       engenius,enh202-v1|\
+       ubnt,airrouter|\
+       ubnt,bullet-m-ar7240|\
+       ubnt,bullet-m-ar7241|\
+       ubnt,nanobridge-m|\
+       ubnt,nanostation-loco-m|\
+       ubnt,nanostation-m|\
+       ubnt,picostation-m)
+               label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+               ;;
        tplink,tl-wr941-v2|\
        tplink,tl-wr941n-v7-cn)
                base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)