--- /dev/null
+From dea6a3f3a5c9b1fa6a5dc60eaeaeca487e07769b Mon Sep 17 00:00:00 2001
+From: Lee Jackson <info@arducam.com>
+Date: Fri, 27 Aug 2021 14:36:55 +0800
+Subject: [PATCH] dt-bindings: media: i2c: Add IMX519 CMOS sensor
+ binding
+
+Add YAML device tree binding for IMX519 CMOS image sensor, and
+the relevant MAINTAINERS entries.
+
+Signed-off-by: Lee Jackson <info@arducam.com>
+---
+ .../devicetree/bindings/media/i2c/imx519.yaml | 113 ++++++++++++++++++
+ MAINTAINERS | 8 ++
+ 2 files changed, 121 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/media/i2c/imx519.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/media/i2c/imx519.yaml
+@@ -0,0 +1,113 @@
++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/media/i2c/imx519.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Sony 1/2.5-Inch 16Mpixel CMOS Digital Image Sensor
++
++maintainers:
++ - Lee Jackson <info@arducam.com>
++
++description: |-
++ The Sony IMX519 is a 1/2.5-inch CMOS active pixel digital image sensor
++ with an active array size of 4656H x 3496V. It is programmable through
++ I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
++ Image data is sent through MIPI CSI-2, which is configured as either 2 or
++ 4 data lanes.
++
++properties:
++ compatible:
++ const: sony,imx519
++
++ reg:
++ description: I2C device address
++ maxItems: 1
++
++ clocks:
++ maxItems: 1
++
++ VDIG-supply:
++ description:
++ Digital I/O voltage supply, 1.05 volts
++
++ VANA-supply:
++ description:
++ Analog voltage supply, 2.8 volts
++
++ VDDL-supply:
++ description:
++ Digital core voltage supply, 1.8 volts
++
++ reset-gpios:
++ description: |-
++ Reference to the GPIO connected to the xclr pin, if any.
++ Must be released (set high) after all supplies and INCK are applied.
++
++ # See ../video-interfaces.txt for more details
++ port:
++ type: object
++ properties:
++ endpoint:
++ type: object
++ properties:
++ data-lanes:
++ description: |-
++ The sensor supports either two-lane, or four-lane operation.
++ For two-lane operation the property must be set to <1 2>.
++ items:
++ - const: 1
++ - const: 2
++
++ clock-noncontinuous:
++ type: boolean
++ description: |-
++ MIPI CSI-2 clock is non-continuous if this property is present,
++ otherwise it's continuous.
++
++ link-frequencies:
++ allOf:
++ - $ref: /schemas/types.yaml#/definitions/uint64-array
++ description:
++ Allowed data bus frequencies.
++
++ required:
++ - link-frequencies
++
++required:
++ - compatible
++ - reg
++ - clocks
++ - VANA-supply
++ - VDIG-supply
++ - VDDL-supply
++ - port
++
++additionalProperties: false
++
++examples:
++ - |
++ i2c0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ imx519: sensor@1a {
++ compatible = "sony,imx519";
++ reg = <0x1a>;
++ clocks = <&imx519_clk>;
++ VANA-supply = <&imx519_vana>; /* 2.8v */
++ VDIG-supply = <&imx519_vdig>; /* 1.05v */
++ VDDL-supply = <&imx519_vddl>; /* 1.8v */
++
++ port {
++ imx519_0: endpoint {
++ remote-endpoint = <&csi1_ep>;
++ data-lanes = <1 2>;
++ clock-noncontinuous;
++ link-frequencies = /bits/ 64 <493500000>;
++ };
++ };
++ };
++ };
++
++...
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -17532,6 +17532,14 @@ F: Documentation/devicetree/bindings/med
+ F: Documentation/devicetree/bindings/media/i2c/imx477.yaml
+ F: drivers/media/i2c/imx477.c
+
++SONY IMX519 SENSOR DRIVER
++M: Arducam Kernel Maintenance <info@arducam.com>
++L: linux-media@vger.kernel.org
++S: Maintained
++T: git git://linuxtv.org/media_tree.git
++F: Documentation/devicetree/bindings/media/i2c/imx519.yaml
++F: drivers/media/i2c/imx519.c
++
+ SONY MEMORYSTICK SUBSYSTEM
+ M: Maxim Levitsky <maximlevitsky@gmail.com>
+ M: Alex Dubov <oakad@yahoo.com>
projects / openwrt / openwrt.git / blobdiff