treewide: remove files for building 5.10 kernel

[openwrt/openwrt.git] / target / linux / bcm4908 / patches-5.10 / 701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch

diff --git a/target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
deleted file mode 100644 (file)
index 7659aa2..0000000
--- a/target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 16 Feb 2021 00:06:35 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: keep GPHY enabled on the BCM4908
-
-Trying to access disabled PHY results in MDIO_READ_FAIL and:
-[   11.962886] brcm-sf2 80080000.switch wan: configuring for phy/internal link mode
-[   11.972500] 8021q: adding VLAN 0 to HW filter on device wan
-[   11.980205] ------------[ cut here ]------------
-[   11.984885] WARNING: CPU: 0 PID: 7 at phy_error+0x10/0x58
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/dsa/bcm_sf2.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1554,6 +1554,12 @@ static int bcm_sf2_sw_probe(struct platf
-                priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
-                priv->irq0, priv->irq1);
- 
-+      /* BCM4908 has 5 GPHYs which means bcm_sf2_port_setup() will not enable
-+       * GPHY when needed. Leave it enabled here.
-+       */
-+      if (priv->type == BCM4908_DEVICE_ID)
-+              bcm_sf2_gphy_enable_set(priv->dev->ds, true);
-+
-       return 0;
- 
- out_mdio: