bcm53xx: start working on Netgear R8500

[openwrt/openwrt.git] / target / linux / bcm53xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network
index 644d3d9bb9e3548b64ccd3644ce2d9cf22ede8e0..f879e01bf245c67fd075bfffb99478d86911150d 100755 (executable)
--- a/target/linux/bcm53xx/base-files/etc/board.d/02_network
+++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network
@@ -3,14 +3,42 @@
 # Copyright (C) 2011 OpenWrt.org
 #
 
-. /lib/functions/uci-defaults-new.sh
+. /lib/functions/uci-defaults.sh
 
 board_config_update
 
-ucidef_set_interface_loopback
+board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
+case "$board" in
+asus,rt-ac87u)
+       ifname=eth1
+       ;;
+netgear,r8000)
+       ifname=eth2
+       ;;
+netgear,r8500)
+       ifname=eth2
+       ;;
+*)
+       ifname=eth0
+       ;;
+esac
 
-ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-ucidef_add_switch "switch0" "1" "1"
+# Workaround for devices using eth2
+case "$board" in
+netgear,r8000)
+       ifname=eth0
+       ;;
+esac
+
+# Workaround for devices using CPU port 8 (connected to eth2)
+case "$board" in
+netgear,r8000)
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
+       board_config_flush
+       exit 0
+       ;;
+esac
 
 # NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses
 # vlan1ports=3 2 1 0 5*
@@ -21,15 +49,19 @@ vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))"
 vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))"
 if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
    echo "$vlan2ports" | egrep -q "^0 5"; then
-       ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
-       ucidef_add_switch_vlan "switch0" "2" "0 5t"
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5t@$ifname"
+elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \
+     echo "$vlan2ports" | egrep -q "^0 7"; then
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "7t@$ifname"
 elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
      echo "$vlan2ports" | egrep -q "^4 8"; then
-       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5 7 8t"
-       ucidef_add_switch_vlan "switch0" "2" "4 8t"
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3:lan" "5:lan" "7:lan" "4:wan" "8t@$ifname"
 else
-       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
-       ucidef_add_switch_vlan "switch0" "2" "4 5t"
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
 fi
 
 board_config_flush