kernel: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / bcm53xx / patches-4.19 / 031-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch

diff --git a/target/linux/bcm53xx/patches-4.19/031-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch b/target/linux/bcm53xx/patches-4.19/031-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch
deleted file mode 100644 (file)
index 5f6dd17..0000000
--- a/target/linux/bcm53xx/patches-4.19/031-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 9994241ac97cb84d1df98fdc172d3cc6b04b11bf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 9 Nov 2018 09:56:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe Northstar pins mux controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This describes hardware & will allow referencing pin functions. The
-first usage is UART1 which allows supporting devices using it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 44 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -37,6 +37,8 @@
-                       reg = <0x0400 0x100>;
-                       interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&iprocslow>;
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&pinmux_uart1>;
-                       status = "disabled";
-               };
-       };
-@@ -391,6 +393,48 @@
-               status = "disabled";
-       };
- 
-+      dmu@1800c000 {
-+              compatible = "simple-bus";
-+              ranges = <0 0x1800c000 0x1000>;
-+              #address-cells = <1>;
-+              #size-cells = <1>;
-+
-+              cru@100 {
-+                      compatible = "simple-bus";
-+                      reg = <0x100 0x1a4>;
-+                      ranges;
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
-+
-+                      pin-controller@1c0 {
-+                              compatible = "brcm,bcm4708-pinmux";
-+                              reg = <0x1c0 0x24>;
-+                              reg-names = "cru_gpio_control";
-+
-+                              spi-pins {
-+                                      groups = "spi_grp";
-+                                      function = "spi";
-+                              };
-+
-+                              i2c {
-+                                      groups = "i2c_grp";
-+                                      function = "i2c";
-+                              };
-+
-+                              pwm {
-+                                      groups = "pwm0_grp", "pwm1_grp",
-+                                               "pwm2_grp", "pwm3_grp";
-+                                      function = "pwm";
-+                              };
-+
-+                              pinmux_uart1: uart1 {
-+                                      groups = "uart1_grp";
-+                                      function = "uart1";
-+                              };
-+                      };
-+              };
-+      };
-+
-       lcpll0: lcpll0@1800c100 {
-               #clock-cells = <1>;
-               compatible = "brcm,nsp-lcpll0";