bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices

[openwrt/staging/yousong.git] / target / linux / bcm53xx / patches-4.4 / 130-0001-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch

diff --git a/target/linux/bcm53xx/patches-4.4/130-0001-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch b/target/linux/bcm53xx/patches-4.4/130-0001-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
deleted file mode 100644 (file)
index 7eb586f..0000000
--- a/target/linux/bcm53xx/patches-4.4/130-0001-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear
- R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
-two of them for 5 GHz band. Both seem the same and their firmwares
-report the same set of channels. The problem is due to hardware / board
-design there are extra limitations that should be respected.
-
-First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
-used for U-NII-1. Using them in a different way may result in wireless
-not working or in noticeably reduced performance. Basic version of this
-info was provided by Broadcom employee, then it has been verified by me
-using original vendor firmware (which has limitations hardcoded in UI).
-
-This patch uses recently introduced ieee80211-freq-limit property to
-describe these limitations at DT level.
-
-Referencing PCIe devices in DT required specifying all related bridges.
-Below you can see (a bit complex) PCI tree from R8000 that explains all
-entries that I needed to put in DT.
-
-0000:00:00.0           14e4:8012       Bridge Device
-└─ 0000:01:00.0            14e4:aa52       Network Controller
-
-0001:00:00.0           14e4:8012       Bridge Device
-└─ 0001:01:00.0            10b5:8603       Bridge Device
-   ├─ 0001:02:01.0 10b5:8603       Bridge Device
-   │  └─ 0001:03:00.0    14e4:aa52       Network Controller
-   ├─ 0001:02:02.0 10b5:8603       Bridge Device
-   │  └─ 0001:04:00.0    14e4:aa52       Network Controller
-   ├─ 0001:02:03.0 000d:0000       0x000000
-   ├─ 0001:02:04.0 000d:0000       0x000000
-   ├─ 0001:02:05.0 000d:0000       0x000000
-   ├─ 0001:02:06.0 000d:0000       0x000000
-   ├─ (...)
-   ├─ 0001:02:1d.0 000d:0000       0x000000
-   ├─ 0001:02:1e.0 000d:0000       0x000000
-   └─ 0001:02:1f.0 000d:0000       0x000000
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi             |  8 +++++
- 2 files changed, 56 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -108,6 +108,54 @@
-       };
- };
- 
-+&pcie0 {
-+      #address-cells = <3>;
-+      #size-cells = <2>;
-+
-+      bridge@0,0,0 {
-+              reg = <0x0000 0 0 0 0>;
-+
-+              #address-cells = <3>;
-+              #size-cells = <2>;
-+
-+              wifi@0,1,0 {
-+                      reg = <0x0000 0 0 0 0>;
-+                      ieee80211-freq-limit = <5735000 5835000>;
-+              };
-+      };
-+};
-+
-+&pcie1 {
-+      #address-cells = <3>;
-+      #size-cells = <2>;
-+
-+      bridge@1,0,0 {
-+              reg = <0x0000 0 0 0 0>;
-+
-+              #address-cells = <3>;
-+              #size-cells = <2>;
-+
-+              bridge@1,1,0 {
-+                      reg = <0x0000 0 0 0 0>;
-+
-+                      #address-cells = <3>;
-+                      #size-cells = <2>;
-+
-+                      bridge@1,2,2 {
-+                              reg = <0x1000 0 0 0 0>;
-+
-+                              #address-cells = <3>;
-+                              #size-cells = <2>;
-+
-+                              wifi@1,4,0 {
-+                                      reg = <0x0000 0 0 0 0>;
-+                                      ieee80211-freq-limit = <5170000 5730000>;
-+                              };
-+                      };
-+              };
-+      };
-+};
-+
- &usb2 {
-       vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -243,6 +243,14 @@
-                       #gpio-cells = <2>;
-               };
- 
-+              pcie0: pcie@12000 {
-+                      reg = <0x00012000 0x1000>;
-+              };
-+
-+              pcie1: pcie@13000 {
-+                      reg = <0x00013000 0x1000>;
-+              };
-+
-               usb2: usb2@21000 {
-                       reg = <0x00021000 0x1000>;
-