bcm53xx: add testing support for kernel 6.1

[openwrt/staging/hauke.git] / target / linux / bcm53xx / patches-6.1 / 310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch

diff --git a/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
new file mode 100644 (file)
index 0000000..02340f4
--- /dev/null
+++ b/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
@@ -0,0 +1,64 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+       bcm4709-buffalo-wxr-1900dhp.dtb \
+       bcm4709-linksys-ea9200.dtb \
+       bcm4709-netgear-r7000.dtb \
++      bcm4709-netgear-r7900.dtb \
+       bcm4709-netgear-r8000.dtb \
+       bcm4709-tplink-archer-c9-v1.dtb \
+       bcm47094-asus-rt-ac88u.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
+@@ -0,0 +1,42 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Netgear R7900
++ *
++ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4709.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++      compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
++      model = "Netgear R7900";
++
++      chosen {
++              bootargs = "console=ttyS0,115200";
++      };
++
++      memory {
++              reg = <0x00000000 0x08000000
++                     0x88000000 0x08000000>;
++      };
++
++      axi@18000000 {
++              usb3@23000 {
++                      reg = <0x00023000 0x1000>;
++
++                      #address-cells = <1>;
++                      #size-cells = <1>;
++
++                      vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++              };
++      };
++};
++
++&uart0 {
++      status = "okay";
++};