#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/reset/bcm6362-reset.h>
#include <dt-bindings/soc/bcm6362-pm.h>
interrupt-controller;
#interrupt-cells = <2>;
+ interrupt-parent = <&periph_intc>;
interrupts = <BCM6362_IRQ_EXT0>,
<BCM6362_IRQ_EXT1>,
<BCM6362_IRQ_EXT2>,
timeout-sec = <30>;
};
- gpio: syscon@10000080 {
- compatible = "syscon", "simple-mfd";
+ gpio_cntl: syscon@10000080 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6362-gpio-sysctl",
+ "syscon", "simple-mfd";
reg = <0x10000080 0x80>;
+ ranges = <0 0x10000080 0x80>;
native-endian;
- pinctrl: pin-controller {
- compatible = "brcm,bcm6362-pinctrl";
+ gpio: gpio@0 {
+ compatible = "brcm,bcm6362-gpio";
+ reg-names = "dirout", "dat";
+ reg = <0x0 0x8>, <0x8 0x8>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 48>;
#gpio-cells = <2>;
+ };
- interrupts-extended = <&ext_intc 0 0>,
- <&ext_intc 1 0>,
- <&ext_intc 2 0>,
- <&ext_intc 3 0>;
- interrupt-names = "gpio24",
- "gpio25",
- "gpio26",
- "gpio27";
+ pinctrl: pinctrl@18 {
+ compatible = "brcm,bcm6362-pinctrl";
+ reg = <0x18 0x10>, <0x38 0x4>;
- pinctrl_usb_device_led: usb_device_led {
+ pinctrl_usb_device_led: usb_device_led-pins {
function = "usb_device_led";
pins = "gpio0";
};
- pinctrl_sys_irq: sys_irq {
+ pinctrl_sys_irq: sys_irq-pins {
function = "sys_irq";
pins = "gpio1";
};
- pinctrl_serial_led: serial_led {
- pinctrl_serial_led_clk: serial_led_clk {
+ pinctrl_serial_led: serial_led-pins {
+ pinctrl_serial_led_clk: serial_led_clk-pins {
function = "serial_led_clk";
pins = "gpio2";
};
- pinctrl_serial_led_data: serial_led_data {
+ pinctrl_serial_led_data: serial_led_data-pins {
function = "serial_led_data";
pins = "gpio3";
};
};
- pinctrl_robosw_led_data: robosw_led_data {
+ pinctrl_robosw_led_data: robosw_led_data-pins {
function = "robosw_led_data";
pins = "gpio4";
};
- pinctrl_robosw_led_clk: robosw_led_clk {
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
function = "robosw_led_clk";
pins = "gpio5";
};
- pinctrl_robosw_led0: robosw_led0 {
+ pinctrl_robosw_led0: robosw_led0-pins {
function = "robosw_led0";
pins = "gpio6";
};
- pinctrl_robosw_led1: robosw_led1 {
+ pinctrl_robosw_led1: robosw_led1-pins {
function = "robosw_led1";
pins = "gpio7";
};
- pinctrl_inet_led: inet_led {
+ pinctrl_inet_led: inet_led-pins {
function = "inet_led";
pins = "gpio8";
};
- pinctrl_spi_cs2: spi_cs2 {
+ pinctrl_spi_cs2: spi_cs2-pins {
function = "spi_cs2";
pins = "gpio9";
};
- pinctrl_spi_cs3: spi_cs3 {
+ pinctrl_spi_cs3: spi_cs3-pins {
function = "spi_cs3";
pins = "gpio10";
};
- pinctrl_ntr_pulse: ntr_pulse {
+ pinctrl_ntr_pulse: ntr_pulse-pins {
function = "ntr_pulse";
pins = "gpio11";
};
- pinctrl_uart1_scts: uart1_scts {
+ pinctrl_uart1_scts: uart1_scts-pins {
function = "uart1_scts";
pins = "gpio12";
};
- pinctrl_uart1_srts: uart1_srts {
+ pinctrl_uart1_srts: uart1_srts-pins {
function = "uart1_srts";
pins = "gpio13";
};
- pinctrl_uart1: uart1 {
- pinctrl_uart1_sdin: uart1_sdin {
+ pinctrl_uart1: uart1-pins {
+ pinctrl_uart1_sdin: uart1_sdin-pins {
function = "uart1_sdin";
pins = "gpio14";
};
- pinctrl_uart1_sdout: uart1_sdout {
+ pinctrl_uart1_sdout: uart1_sdout-pins {
function = "uart1_sdout";
pins = "gpio15";
};
};
- pinctrl_adsl_spi: adsl_spi {
- pinctrl_adsl_spi_miso: adsl_spi_miso {
+ pinctrl_adsl_spi: adsl_spi-pins {
+ pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
function = "adsl_spi_miso";
pins = "gpio16";
};
- pinctrl_adsl_spi_mosi: adsl_spi_mosi {
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
function = "adsl_spi_mosi";
pins = "gpio17";
};
- pinctrl_adsl_spi_clk: adsl_spi_clk {
+ pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
function = "adsl_spi_clk";
pins = "gpio18";
};
- pinctrl_adsl_spi_cs: adsl_spi_cs {
+ pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
function = "adsl_spi_cs";
pins = "gpio19";
};
};
- pinctrl_ephy0_led: ephy0_led {
+ pinctrl_ephy0_led: ephy0_led-pins {
function = "ephy0_led";
pins = "gpio20";
};
- pinctrl_ephy1_led: ephy1_led {
+ pinctrl_ephy1_led: ephy1_led-pins {
function = "ephy1_led";
pins = "gpio21";
};
- pinctrl_ephy2_led: ephy2_led {
+ pinctrl_ephy2_led: ephy2_led-pins {
function = "ephy2_led";
pins = "gpio22";
};
- pinctrl_ephy3_led: ephy3_led {
+ pinctrl_ephy3_led: ephy3_led-pins {
function = "ephy3_led";
pins = "gpio23";
};
- pinctrl_ext_irq0: ext_irq0 {
+ pinctrl_ext_irq0: ext_irq0-pins {
function = "ext_irq0";
pins = "gpio24";
};
- pinctrl_ext_irq1: ext_irq1 {
+ pinctrl_ext_irq1: ext_irq1-pins {
function = "ext_irq1";
pins = "gpio25";
};
- pinctrl_ext_irq2: ext_irq2 {
+ pinctrl_ext_irq2: ext_irq2-pins {
function = "ext_irq2";
pins = "gpio26";
};
- pinctrl_ext_irq3: ext_irq3 {
+ pinctrl_ext_irq3: ext_irq3-pins {
function = "ext_irq3";
pins = "gpio27";
};
- pinctrl_nand: nand {
+ pinctrl_nand: nand-pins {
function = "nand";
group = "nand_grp";
};
};
lsspi: spi@10000800 {
- compatible = "brcm,bcm6358-spi";
- reg = <0x10000800 0x70c>;
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "brcm,bcm6358-spi";
+ reg = <0x10000800 0x70c>;
interrupt-parent = <&periph_intc>;
interrupts = <BCM6362_IRQ_LSSPI>;
};
hsspi: spi@10001000 {
- compatible = "brcm,bcm6328-hsspi";
- reg = <0x10001000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "brcm,bcm6328-hsspi";
+ reg = <0x10001000 0x600>;
interrupt-parent = <&periph_intc>;
interrupts = <BCM6362_IRQ_HSSPI>;
status = "disabled";
};
+ serdes_cntl: syscon@10001804 {
+ compatible = "syscon";
+ reg = <0x10001804 0x4>;
+ native-endian;
+ };
+
periph_pwr: power-controller@10001848 {
compatible = "brcm,bcm6362-power-controller";
reg = <0x10001848 0x4>;
compatible = "brcm,bcm6362-ehci", "generic-ehci";
reg = <0x10002500 0x100>;
big-endian;
- ignore-oc;
+ spurious-oc;
interrupt-parent = <&periph_intc>;
interrupts = <BCM6362_IRQ_EHCI>;
status = "disabled";
};
+
+ random: rng@10002880 {
+ compatible = "brcm,bcm6368-rng";
+ reg = <0x10002880 0x14>;
+
+ clocks = <&periph_clk BCM6362_CLK_IPSEC>;
+ clock-names = "ipsec";
+
+ resets = <&periph_rst BCM6362_RST_IPSEC>;
+
+ power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_IPSEC>;
+ };
+
+ ethernet: ethernet@1000d800 {
+ compatible = "brcm,bcm6362-enetsw";
+ reg = <0x1000d800 0x80>,
+ <0x1000da00 0x80>,
+ <0x1000dc00 0x80>;
+ reg-names = "dma",
+ "dma-channels",
+ "dma-sram";
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <BCM6362_IRQ_ENETSW_RX_DMA0>;
+ interrupt-names = "rx";
+
+ clocks = <&periph_clk BCM6362_CLK_SWPKT_USB>,
+ <&periph_clk BCM6362_CLK_SWPKT_SAR>,
+ <&periph_clk BCM6362_CLK_ROBOSW>;
+
+ resets = <&periph_rst BCM6362_RST_ENETSW>,
+ <&periph_rst BCM6362_RST_EPHY>;
+
+ power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_ROBOSW>,
+ <&periph_pwr BCM6362_POWER_DOMAIN_GMII_PADS>;
+
+ dma-rx = <0>;
+ dma-tx = <1>;
+
+ status = "disabled";
+ };
+
+ switch0: switch@10e00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6362-switch";
+ reg = <0x10e00000 0x8000>;
+ big-endian;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+
+ phy-mode = "internal";
+ ethernet = <ðernet>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@10e000b0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6368-mdio-mux";
+ reg = <0x10e000b0 0x8>;
+
+ mdio_int: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ phy4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ mdio_ext: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+
+ pcie: pcie@10e40000 {
+ compatible = "brcm,bcm6328-pcie";
+ reg = <0x10e40000 0x10000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ device_type = "pci";
+ bus-range = <0x00 0x01>;
+ ranges = <0x2000000 0 0x10f00000 0x10f00000 0 0x100000>;
+ linux,pci-probe-only = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <BCM6362_IRQ_PCIE_RC>;
+
+ clocks = <&periph_clk BCM6362_CLK_PCIE>;
+ clock-names = "pcie";
+
+ resets = <&periph_rst BCM6362_RST_PCIE>,
+ <&periph_rst BCM6362_RST_PCIE_EXT>,
+ <&periph_rst BCM6362_RST_PCIE_CORE>;
+ reset-names = "pcie",
+ "pcie-ext",
+ "pcie-core";
+
+ power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_PCIE>;
+
+ brcm,serdes = <&serdes_cntl>;
+
+ status = "disabled";
+ };
};
};
projects / openwrt / openwrt.git / blobdiff