remove the brcm-2.4 target, it will no longer be supported in future releases. please...

[openwrt/svn-archive/archive.git] / target / linux / brcm-2.4 / patches / 009-wrt54g3g_pcmcia.patch

diff --git a/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch b/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch
deleted file mode 100644 (file)
index 81b5ee8..0000000
--- a/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/pcmcia/yenta.c
-+++ b/drivers/pcmcia/yenta.c
-@@ -543,6 +543,9 @@ static unsigned int yenta_probe_irq(pci_
-        * Probe for usable interrupts using the force
-        * register to generate bogus card status events.
-        */
-+
-+#ifndef CONFIG_BCM947XX
-+      /* WRT54G3G does not like this */
-       cb_writel(socket, CB_SOCKET_EVENT, -1);
-       cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
-       exca_writeb(socket, I365_CSCINT, 0);
-@@ -557,7 +560,8 @@ static unsigned int yenta_probe_irq(pci_
-       }
-       cb_writel(socket, CB_SOCKET_MASK, 0);
-       exca_writeb(socket, I365_CSCINT, 0);
--      
-+#endif
-+
-       mask = probe_irq_mask(val) & 0xffff;
- 
-       bridge_ctrl &= ~CB_BRIDGE_INTR;
-@@ -578,6 +582,12 @@ static void yenta_get_socket_capabilitie
-       socket->cap.cb_dev = socket->dev;
-       socket->cap.bus = NULL;
- 
-+#ifdef CONFIG_BCM947XX
-+      /* irq mask probing is broken for the WRT54G3G */
-+      if (socket->cap.irq_mask == 0)
-+              socket->cap.irq_mask = 0x6f8;
-+#endif
-+
-       printk(KERN_INFO "Yenta ISA IRQ mask 0x%04x, PCI irq %d\n",
-              socket->cap.irq_mask, socket->cb_irq);
- }
-@@ -609,6 +619,15 @@ static void yenta_open_bh(void * data)
-       printk(KERN_INFO "Socket status: %08x\n",
-              cb_readl(socket, CB_SOCKET_STATE));
- 
-+      /* Generate an interrupt on card insert/remove */
-+      config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+      /* Set up Multifunction Routing Status Register */
-+      config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+      
-+      /* Switch interrupts to parallelized */
-+      config_writeb(socket, 0x92, 0x64);
-+      
-       /* Register it with the pcmcia layer.. */
-       cardbus_register(socket);
- 
-@@ -731,7 +750,7 @@ static void yenta_allocate_res(pci_socke
- {
-       struct pci_bus *bus;
-       struct resource *root, *res;
--      u32 start, end;
-+      u32 start = 0, end = 0;
-       u32 align, size, min, max;
-       unsigned offset;
-       unsigned mask;
-@@ -750,6 +769,15 @@ static void yenta_allocate_res(pci_socke
-       res->end = 0;
-       root = pci_find_parent_resource(socket->dev, res);
- 
-+#ifdef CONFIG_BCM947XX
-+      /* default mem resources are completely fscked up on the wrt54g3g */
-+      /* bypass the entire resource allocation stuff below and just set it statically */
-+      if (type & IORESOURCE_MEM) {
-+              res->start = 0x40004000;
-+              res->end = res->start + 0x3fff;
-+      }
-+
-+#else
-       if (!root)
-               return;
- 
-@@ -794,6 +822,7 @@ static void yenta_allocate_res(pci_socke
-               res->start = res->end = 0;
-               return;
-       }
-+#endif
- 
-       config_writel(socket, offset, res->start);
-       config_writel(socket, offset+4, res->end);