brcm2708: remove linux 4.1 support

[openwrt/svn-archive/archive.git] / target / linux / brcm2708 / patches-4.1 / 0217-dts-Added-overlay-for-gpio_ir_recv-driver.patch

diff --git a/target/linux/brcm2708/patches-4.1/0217-dts-Added-overlay-for-gpio_ir_recv-driver.patch b/target/linux/brcm2708/patches-4.1/0217-dts-Added-overlay-for-gpio_ir_recv-driver.patch
deleted file mode 100644 (file)
index e8701ac..0000000
--- a/target/linux/brcm2708/patches-4.1/0217-dts-Added-overlay-for-gpio_ir_recv-driver.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From a325b7215cef646853a7a2b6d338fb2e9da78def Mon Sep 17 00:00:00 2001
-From: Holger Steinhaus <hsteinhaus@gmx.de>
-Date: Sat, 14 Nov 2015 18:37:43 +0100
-Subject: [PATCH 217/222] dts: Added overlay for gpio_ir_recv driver
-
----
- arch/arm/boot/dts/overlays/Makefile            |  1 +
- arch/arm/boot/dts/overlays/README              | 16 +++++++++
- arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 45 ++++++++++++++++++++++++++
- 3 files changed, 62 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -17,6 +17,7 @@ dtb-$(RPI_DT_OVERLAYS) += at86rf233-over
- dtb-$(RPI_DT_OVERLAYS) += bmp085_i2c-sensor-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += dht11-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += enc28j60-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += gpio-ir-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += gpio-poweroff-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += hifiberry-amp-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += hifiberry-dac-overlay.dtb
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -209,6 +209,22 @@ Params: int_pin                  GPIO us
-         speed                    SPI bus speed (default 12000000)
- 
- 
-+Name:   gpio-ir
-+Info:   Use GPIO pin as rc-core style infrared receiver input. The rc-core-
-+        based gpio_ir_recv driver maps received keys directly to a
-+        /dev/input/event* device, all decoding is done by the kernel - LIRC is
-+        not required! The key mapping and other decoding parameters can be
-+        configured by "ir-keytable" tool.
-+Load:   dtoverlay=gpio-ir,<param>=<val>
-+Params: gpio_pin                 Input pin number. Default is 18.
-+
-+        gpio_pull                Desired pull-up/down state (off, down, up)
-+                                 Default is "down".
-+
-+        rc-map-name              Default rc keymap (can also be changed by
-+                                 ir-keytable), defaults to "rc-rc6-mce"
-+
-+
- Name:   gpio-poweroff
- Info:   Drives a GPIO high or low on reboot
- Load:   gpio-poweroff,<param>=<val>
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts
-@@ -0,0 +1,45 @@
-+// Definitions for ir-gpio module
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+        compatible = "brcm,bcm2708";
-+
-+        fragment@0 {
-+                target-path = "/";
-+                __overlay__ {
-+                        gpio_ir: ir-receiver {
-+                                compatible = "gpio-ir-receiver";
-+
-+                                // pin number, high or low
-+                                gpios = <&gpio 18 1>;
-+
-+                                // parameter for keymap name
-+                                linux,rc-map-name = "rc-rc6-mce";
-+
-+                                status = "okay";
-+                        };
-+                };
-+        };
-+
-+        fragment@1 {
-+                target = <&gpio>;
-+                __overlay__ {
-+                        gpio_ir_pins: gpio_ir_pins {
-+                                brcm,pins = <18>;                       // pin 18
-+                                brcm,function = <0>;                    // in
-+                                brcm,pull = <1>;                        // down
-+                        };
-+                };
-+        };
-+
-+        __overrides__ {
-+                // parameters
-+                gpio_pin =      <&gpio_ir>,"gpios:4",
-+                                        <&gpio_ir_pins>,"brcm,pins:0",
-+                                        <&gpio_ir_pins>,"brcm,pull:0";  // pin number
-+                gpio_pull = <&gpio_ir_pins>,"brcm,pull:0";              // pull-up/down state
-+
-+                rc-map-name = <&gpio_ir>,"linux,rc-map-name";           // default rc map
-+        };
-+};