brcm2708: organize kernel patches

[openwrt/staging/chunkeey.git] / target / linux / brcm2708 / patches-4.19 / 950-0204-lirc-rpi-Remove-in-favour-of-gpio-ir.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0204-lirc-rpi-Remove-in-favour-of-gpio-ir.patch b/target/linux/brcm2708/patches-4.19/950-0204-lirc-rpi-Remove-in-favour-of-gpio-ir.patch
new file mode 100644 (file)
index 0000000..0c6e627
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0204-lirc-rpi-Remove-in-favour-of-gpio-ir.patch
@@ -0,0 +1,81 @@
+From 28b591dadb504861cdc535d5705aa4c8c3d3420f Mon Sep 17 00:00:00 2001
+From: popcornmix <popcornmix@gmail.com>
+Date: Fri, 30 Nov 2018 18:55:23 +0000
+Subject: [PATCH] lirc-rpi: Remove in favour of gpio-ir
+
+---
+ arch/arm/boot/dts/overlays/Makefile           |  1 -
+ .../boot/dts/overlays/lirc-rpi-overlay.dts    | 57 -------------------
+ 2 files changed, 58 deletions(-)
+ delete mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -68,7 +68,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+       jedec-spi-nor.dtbo \
+       justboom-dac.dtbo \
+       justboom-digi.dtbo \
+-      lirc-rpi.dtbo \
+       ltc294x.dtbo \
+       mbed-dac.dtbo \
+       mcp23017.dtbo \
+--- a/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
++++ /dev/null
+@@ -1,57 +0,0 @@
+-// Definitions for lirc-rpi module
+-/dts-v1/;
+-/plugin/;
+-
+-/ {
+-      compatible = "brcm,bcm2708";
+-
+-      fragment@0 {
+-              target-path = "/";
+-              __overlay__ {
+-                      lirc_rpi: lirc_rpi {
+-                              compatible = "rpi,lirc-rpi";
+-                              pinctrl-names = "default";
+-                              pinctrl-0 = <&lirc_pins>;
+-                              status = "okay";
+-
+-                              // Override autodetection of IR receiver circuit
+-                              // (0 = active high, 1 = active low, -1 = no override )
+-                              rpi,sense = <0xffffffff>;
+-
+-                              // Software carrier
+-                              // (0 = off, 1 = on)
+-                              rpi,softcarrier = <1>;
+-
+-                              // Invert output
+-                              // (0 = off, 1 = on)
+-                              rpi,invert = <0>;
+-
+-                              // Enable debugging messages
+-                              // (0 = off, 1 = on)
+-                              rpi,debug = <0>;
+-                      };
+-              };
+-      };
+-
+-      fragment@1 {
+-              target = <&gpio>;
+-              __overlay__ {
+-                      lirc_pins: lirc_pins {
+-                              brcm,pins = <17 18>;
+-                              brcm,function = <1 0>; // out in
+-                              brcm,pull = <0 1>; // off down
+-                      };
+-              };
+-      };
+-
+-      __overrides__ {
+-              gpio_out_pin =  <&lirc_pins>,"brcm,pins:0";
+-              gpio_in_pin =   <&lirc_pins>,"brcm,pins:4";
+-              gpio_in_pull =  <&lirc_pins>,"brcm,pull:4";
+-
+-              sense =         <&lirc_rpi>,"rpi,sense:0";
+-              softcarrier =   <&lirc_rpi>,"rpi,softcarrier:0";
+-              invert =        <&lirc_rpi>,"rpi,invert:0";
+-              debug =         <&lirc_rpi>,"rpi,debug:0";
+-      };
+-};