brcm2708: rename target to bcm27xx

[openwrt/staging/chunkeey.git] / target / linux / brcm2708 / patches-4.19 / 950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch b/target/linux/brcm2708/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch
deleted file mode 100644 (file)
index 7ad61b6..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From a1905aed89ee45f6662f03b77dc604ff1a169671 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <wahrenst@gmx.net>
-Date: Tue, 17 Sep 2019 19:16:17 +0200
-Subject: [PATCH] ARM: dts: bcm283x: Define MMC interfaces at board
- level
-
-commit e7774049ff255c8ba72bcee9c7ab307a95e8d7bc upstream.
-
-Starting with RPi 4 this is the first board, which doesn't use sdhost
-as default SD interface. So the MMC interfaces should be defined finally at
-board level. Since all boards using sdhci already does this, we can drop the
-pinctrl part from bcm2835-rpi.dtsi.
-
-Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
-Acked-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts  |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi-a.dts       |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts  |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts  |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi-b.dts       |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts  |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi-zero.dts    |  7 +++++++
- arch/arm/boot/dts/bcm2835-rpi.dtsi        | 13 -------------
- arch/arm/boot/dts/bcm2836-rpi-2-b.dts     |  7 +++++++
- 10 files changed, 63 insertions(+), 13 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-@@ -108,6 +108,13 @@
-       status = "okay";
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
---- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
-@@ -103,6 +103,13 @@
-       status = "okay";
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-@@ -110,6 +110,13 @@
-       status = "okay";
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-@@ -103,6 +103,13 @@
-       status = "okay";
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
-@@ -98,6 +98,13 @@
-       status = "okay";
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
---- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
-@@ -81,6 +81,13 @@
-       hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
---- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
-@@ -129,6 +129,13 @@
-       };
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
---- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
-@@ -105,6 +105,13 @@
-       hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-@@ -84,19 +84,6 @@
-       status = "okay";
- };
- 
--&sdhci {
--      pinctrl-names = "default";
--      pinctrl-0 = <&emmc_gpio48>;
--      bus-width = <4>;
--};
--
--&sdhost {
--      pinctrl-names = "default";
--      pinctrl-0 = <&sdhost_gpio48>;
--      status = "okay";
--      bus-width = <4>;
--};
--
- &usb {
-       power-domains = <&power RPI_POWER_DOMAIN_USB>;
- };
---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-@@ -48,6 +48,13 @@
-       status = "okay";
- };
- 
-+&sdhost {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&sdhost_gpio48>;
-+      bus-width = <4>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;