brcm2708: update to latest patches from RPi foundation

[openwrt/openwrt.git] / target / linux / brcm2708 / patches-4.19 / 950-0750-net-phy-bcm54xx-Encode-link-speed-and-activity-into-.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0750-net-phy-bcm54xx-Encode-link-speed-and-activity-into-.patch b/target/linux/brcm2708/patches-4.19/950-0750-net-phy-bcm54xx-Encode-link-speed-and-activity-into-.patch
deleted file mode 100644 (file)
index 9a5e29c..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0750-net-phy-bcm54xx-Encode-link-speed-and-activity-into-.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From b1e290ec968186530ec59479adfba89d2cfe21c8 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <olteanv@gmail.com>
-Date: Sun, 24 Mar 2019 00:18:46 +0200
-Subject: [PATCH] net: phy: bcm54xx: Encode link speed and activity
- into LEDs
-
-Previously the green and amber LEDs on this quad PHY were solid, to
-indicate an encoding of the link speed (10/100/1000).
-
-This keeps the LEDs always on just as before, but now they flash on
-Rx/Tx activity.
-
-Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/broadcom.c | 13 +++++++++++++
- include/linux/brcmphy.h    | 16 ++++++++++++++++
- 2 files changed, 29 insertions(+)
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -345,6 +345,19 @@ static int bcm54xx_config_init(struct ph
- 
-       bcm54xx_phydsp_config(phydev);
- 
-+      /* Encode link speed into LED1 and LED3 pair (green/amber).
-+       * Also flash these two LEDs on activity. This means configuring
-+       * them for MULTICOLOR and encoding link/activity into them.
-+       */
-+      val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
-+              BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
-+      bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
-+
-+      val = BCM_LED_MULTICOLOR_IN_PHASE |
-+              BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
-+              BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
-+      bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
-+
-       return 0;
- }
- 
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -148,6 +148,22 @@
- #define BCM_LED_SRC_OFF               0xe     /* Tied high */
- #define BCM_LED_SRC_ON                0xf     /* Tied low */
- 
-+/*
-+ * Broadcom Multicolor LED configurations (expansion register 4)
-+ */
-+#define BCM_EXP_MULTICOLOR            (MII_BCM54XX_EXP_SEL_ER + 0x04)
-+#define BCM_LED_MULTICOLOR_IN_PHASE   BIT(8)
-+#define BCM_LED_MULTICOLOR_LINK_ACT   0x0
-+#define BCM_LED_MULTICOLOR_SPEED      0x1
-+#define BCM_LED_MULTICOLOR_ACT_FLASH  0x2
-+#define BCM_LED_MULTICOLOR_FDX                0x3
-+#define BCM_LED_MULTICOLOR_OFF                0x4
-+#define BCM_LED_MULTICOLOR_ON         0x5
-+#define BCM_LED_MULTICOLOR_ALT                0x6
-+#define BCM_LED_MULTICOLOR_FLASH      0x7
-+#define BCM_LED_MULTICOLOR_LINK               0x8
-+#define BCM_LED_MULTICOLOR_ACT                0x9
-+#define BCM_LED_MULTICOLOR_PROGRAM    0xa
- 
- /*
-  * BCM5482: Shadow registers