brcm2708: remove linux 4.4 support

[openwrt/staging/yousong.git] / target / linux / brcm2708 / patches-4.4 / 0337-drm-panel-simple-Add-the-7-DPI-panel-from-Adafruit.patch

diff --git a/target/linux/brcm2708/patches-4.4/0337-drm-panel-simple-Add-the-7-DPI-panel-from-Adafruit.patch b/target/linux/brcm2708/patches-4.4/0337-drm-panel-simple-Add-the-7-DPI-panel-from-Adafruit.patch
deleted file mode 100644 (file)
index 3aac13b..0000000
--- a/target/linux/brcm2708/patches-4.4/0337-drm-panel-simple-Add-the-7-DPI-panel-from-Adafruit.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From e2bcafd4dbc3f179adbd6dd60c700994bd641799 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Thu, 24 Mar 2016 17:23:48 -0700
-Subject: [PATCH] drm/panel: simple: Add the 7" DPI panel from Adafruit
-
-This is a basic TFT panel with a 40-pin FPC connector on it.  The
-specification doesn't define timings, but the Adafruit instructions
-were setting up 800x480 CVT.
-
-v2: Add .bus_format and vsync/hsync flags.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
-Acked-by: Rob Herring <robh@kernel.org>
-[treding@nvidia.com: keep entries properly sorted]
-Signed-off-by: Thierry Reding <treding@nvidia.com>
-
-(cherry picked from commit 8070fdbd024727c752f815b18e5339c681a01bbe)
----
- .../bindings/display/panel/ontat,yx700wv03.txt     |  7 ++++
- drivers/gpu/drm/panel/panel-simple.c               | 37 ++++++++++++++++++++++
- 2 files changed, 44 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
-@@ -0,0 +1,7 @@
-+On Tat Industrial Company 7" DPI TFT panel.
-+
-+Required properties:
-+- compatible: should be "ontat,yx700wv03"
-+
-+This binding is compatible with the simple-panel binding, which is specified
-+in simple-panel.txt in this directory.
---- a/drivers/gpu/drm/panel/panel-simple.c
-+++ b/drivers/gpu/drm/panel/panel-simple.c
-@@ -1003,6 +1003,40 @@ static const struct panel_desc okaya_rs8
-       .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
- };
- 
-+/*
-+ * 800x480 CVT. The panel appears to be quite accepting, at least as far as
-+ * pixel clocks, but this is the timing that was being used in the Adafruit
-+ * installation instructions.
-+ */
-+static const struct drm_display_mode ontat_yx700wv03_mode = {
-+      .clock = 29500,
-+      .hdisplay = 800,
-+      .hsync_start = 824,
-+      .hsync_end = 896,
-+      .htotal = 992,
-+      .vdisplay = 480,
-+      .vsync_start = 483,
-+      .vsync_end = 493,
-+      .vtotal = 500,
-+      .vrefresh = 60,
-+      .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-+};
-+
-+/*
-+ * Specification at:
-+ * https://www.adafruit.com/images/product-files/2406/c3163.pdf
-+ */
-+static const struct panel_desc ontat_yx700wv03 = {
-+      .modes = &ontat_yx700wv03_mode,
-+      .num_modes = 1,
-+      .bpc = 8,
-+      .size = {
-+              .width = 154,
-+              .height = 83,
-+      },
-+      .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-+};
-+
- static const struct drm_display_mode ortustech_com43h4m85ulc_mode  = {
-       .clock = 25000,
-       .hdisplay = 480,
-@@ -1179,6 +1213,9 @@ static const struct of_device_id platfor
-               .compatible = "okaya,rs800480t-7x0gp",
-               .data = &okaya_rs800480t_7x0gp,
-       }, {
-+              .compatible = "ontat,yx700wv03",
-+              .data = &ontat_yx700wv03,
-+      }, {
-               .compatible = "ortustech,com43h4m85ulc",
-               .data = &ortustech_com43h4m85ulc,
-       }, {