+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
- [ -e /etc/config/network ] && {
- local batch
-
- config_cb() {
- case "$1" in
- switch)
- option_cb() {
- case "$1" in
- vlan[0-9]|vlan1[0-5])
- local id="${1#vlan}"
- local ports="${2%\*}"
- append batch "delete network.eth0.${1}${N}"
- append batch "set network.eth0_${id}=switch_vlan${N}"
- append batch "set network.eth0_${id}.device=eth0${N}"
- append batch "set network.eth0_${id}.vlan=${id}${N}"
- append batch "set network.eth0_${id}.ports='${ports}'${N}"
- ;;
- esac
- }
- ;;
- switch_vlan)
- option_cb() { :; }
- batch=""
- ;;
- esac
- }
-
- config_load network
-
- [ -n "$batch" ] && {
- logger -t netconfig "migrating switch config to new format ..."
- echo "$batch${N}commit network" | uci batch
- }
-
- exit 0
- }
-
- mkdir -p /etc/config
-
- local cpuport=5
- [ -e /sbin/swconfig ] && cpuport=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")
- local switchname=eth0
- [ -e /sbin/swconfig ] && switchname=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|switch0: \([^\\\\(]*\).*|\1|p")
- local model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
-
- local network_defs=`(
- if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
- # WGT634u
- echo boardtype=wgt634u
- else
- strings "$(find_mtd_part nvram)"
- fi
- ) | awk -v cpuport="$cpuport" -v model="$model" '
- function macinc(mac, maca, i, result) {
- split(mac, maca, ":")
- for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
- if (++maca[6] > 0xff) {
- maca[5]++
- maca[6] = 0
- }
- for (i = 1; i <= 6; i++) {
- if (i != 1) result = result ":"
- result = result sprintf("%02x", maca[i])
- }
- return result
- }
-
- BEGIN {
- FS="="
- c["lan_ifname"]="eth0.1"
- c["wan_ifname"]="eth0.2"
- c["vlan1ports"]="1 2 3 4 5t"
- c["vlan2ports"]="0 5t"
- for (i = 0; i < 6; i++) {
- if (mac_check != "") mac_check = mac_check ":"
- mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
- }
- if (cpuport == "8") {
- c["vlan1ports"]="1 2 3 4 8t"
- c["vlan2ports"]="0 8t"
- }
- }
-
- ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \
- ($1 ~ /^vlan[0-9]{1,2}ports$/) {
- nvram[$1] = $2
- }
-
- END {
- if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
- ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8"))) || \
- ((nvram["vlan2ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8")))) {
- c["vlan1ports"] = "0 1 2 3 8t"
- c["vlan2ports"] = "4 8t"
- }
- if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
- ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5"))) || \
- ((nvram["vlan2ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5")))) {
- c["vlan1ports"] = "0 1 2 3 5t"
- c["vlan2ports"] = "4 5t"
- }
- if ((model == "Asus WLHDD") || (model == "Asus WL300G")) {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth1"
- }
- if (model == "Asus WL330GE") {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth0.1"
- c["vlan1ports"] = "4 5t"
- c["vlan2ports"] = ""
- }
- if ((model == "Asus WL500G") || (model == "Microsoft MN-700")) {
- c["wan_ifname"] = "eth1"
- c["lan_ifname"] = "eth0"
- }
- if ((model == "Asus WL500GP V2") || (model == "Buffalo WHR-G125")) {
- c["vlan1ports"] = "0 1 2 3 5t"
- c["vlan2ports"] = "4 5t"
- }
- if (model == "Dell TrueMobile 2300") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- }
- if (nvram["boardtype"] == "bcm94710r4") {
- # Toshiba WRC-1000
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
- if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
- c["vlan1ports"] = "0 1 2 3 5t"
- c["vlan2ports"] = "4 5t"
- }
- if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
- if (nvram["boardnum"] == "45") {
- # WL-500gP
- c["vlan1ports"] = "1 2 3 4 5t"
- c["vlan2ports"] = "0 5t"
- } else {
- # Generic BCM94704
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
-
- # MAC addresses on 4704 tend to be screwed up. Add a workaround here
- if (nvram["et0macaddr"] ~ mac_check) {
- c["lan_macaddr"] = nvram["et0macaddr"]
- c["wan_macaddr"] = macinc(c["lan_macaddr"])
- }
- }
- }
- # Buffalo WBR-B11 and Buffalo WBR-G54
- if (nvram["boardtype"] == "bcm94710ap") {
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
-
- # WAP54G
- if ((nvram["boardnum"] == "2") || \
- (nvram["boardnum"] == "1024")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # Sitecom WL-105b
- if ((nvram["boardum"] == "2") && \
- (nvram["GemtekPmonVer"] == "1")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # ASUS WL-700gE
- # These are actually same as defaults above. For some reason this script applies
- # Generic BCM94704 settings instead so we revert to proper settings here.
- # Hopefully someone will fix this properly soon.
- if (model == "Asus WL700") {
- c["lan_ifname"]="eth0.1"
- c["wan_ifname"]="eth0.2"
- c["vlan1ports"]="1 2 3 4 5t"
- c["vlan2ports"]="0 5t"
- }
- if ((model == "Motorola WR850G") || (model == "Siemens SE505 V2")) {
- c["vlan1ports"]="0 1 2 3 5t"
- c["vlan2ports"]="4 5t"
- }
- if (model == "Asus WL500W") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- }
- print "local vlan1ports=\"" c["vlan1ports"] "\";"
- print "local vlan2ports=\"" c["vlan2ports"] "\";"
- print "local lan_ifname=\"" c["lan_ifname"] "\";"
- print "local lan_macaddr=\"" c["lan_macaddr"] "\";"
- print "local wan_ifname=\"" c["wan_ifname"] "\";"
- print "local wan_macaddr=\"" c["wan_macaddr"] "\";"
- }'`
-
- . /lib/functions/uci-defaults.sh
-
- touch /etc/config/network
-
- eval "$network_defs"
-
- [ -n "$vlan1ports" -o -n "$vlan2ports" ] && {
- local cfg=`ucidef_add_switch "$switchname" 1 1`
- [ -n "$cfg" ] && uci rename network.$cfg=eth0
- [ -n "$vlan1ports" ] && {
- cfg=`ucidef_add_switch_vlan "$switchname" 1 "$vlan1ports"`
- }
- [ -n "$vlan2ports" ] && {
- cfg=`ucidef_add_switch_vlan "$switchname" 2 "$vlan2ports"`
- }
- }
-
- ucidef_set_interface_loopback
-
- ucidef_set_interface_lan "$lan_ifname"
- [ -n "$lan_macaddr" ] && ucidef_set_interface_macaddr lan "$lan_macaddr"
-
- [ -n "$wan_ifname" ] && {
- ucidef_set_interface_wan "$wan_ifname"
- [ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr wan "$wan_macaddr"
- }
-
- uci commit network
-}
projects / openwrt / svn-archive / archive.git / blobdiff