+++ /dev/null
-The image neede to flash onto a Broadcom 63xx-series board depends on the
-board, method you are using to flash, and, for web-based flash, on the version
-of the Broadcom code your router uses.
-
-There are two major revisions of the Broadcom code as far as imagetags are
-concerned, before 3.08 and after 3.08, however there are some variations
-within in that, either due to vendor differences or due to changes at
-Broadcom (it's not clear yet which is the case). In addtion Pirelli modified
-the Broadcom code, so Alice Gate models use a different imagetag than any
-other vendor.
-
-The imagetag format for flashing via CFE is the same for almost all the
-boards, and is the same for all images generated by the imagetag utility.
-Images flashable using cfe are labelled openwrt-<board>-<filesystem>-cfe.bin
-
-The imagetags for tftp/ftp flashing is based on Broadcom 3.00-3.04 imagetags
-and is known to be correct as the source code GPL and is available for reading.
-
-Broadcom code 2.21 is based on the BT Voyager firmware image I looked at. It
-may in fact be BT Voyager-specific. 2.21 is actually more difficult to deal
-with the imagetag from 3.00 as it has three different CRC calculations in
-addtition to the header CRC.
-
-Broadcom 3.00-3.02 flashing has been tested on Comtrend CT-5261, CT-536 and
-Tecom GW6000, and is the version of the flashing that was present before the
-imagetags were split by broadcom code version (early June 2009)
-
-3.04 is guessed to be the same as 3.00-3.02 based on available information
-
-Broadom 3.06 is thought to be the same as 3.00-3.02, however the only 3.06
-this author (Daniel Dickinson) has seen is the Alice Gate (Pirelli) firmware
-which is known to be different due to vendor (Pirelli) modifications to the
-Broadcom code.
-
-Broadcom 3.10 uses an imagetag that is believed to apply to all 3.10 and 3.12
-versions, and has been tested on the Tecom GW6200. This version introdec changes to
-the imagetag to deal with TR69 (a remote rouer management system developed by the
-DSL forum). There is a field for vendor-specific information, that at least in some
-cases is not optional. It is based on the hexedit of a neufbox4 firmware image, the
-information in https://dev.openwrt.org/ticket/4987, and the hexedit of a Tecom
-GW6200 image.
-
-Some boards share the same tag format, but require vendor-specific fields in
-the board. In that case the tagid is shared, but the filename of the generated
-image reflects the router for which the image was created.
-
-router |method | codever |filename
-+-------------+-------------+---------+---------------------------------------
-|any |cfe+most web | any |openwrt-<board>-<fs>-cfe.bin
-|AGVoIP2+WiFi |cfe |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
-|AGVoIP2+WiFi |web |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
-|CT536 |web |3.02 |openwrt-CT536_CT5621-<fs>-cfe.bin
-|CT5621 |web |3.02 |openwrt-CT536_CT5621-<fs>-cfe.bin
-|DG834GT |web |3.02 |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
-|DG834PN |web |3.02 |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
-|DSL-2640B |web |3.10 |openwrt-DSL2640B-<fs>-cfe.bin
-|DSL-2740B |web |3.10 |openwrt-DSL2670B-<fs>-cfe.bin
-|F5D7633 |web |3.10 |openwrt-F5D7633-<fs>-cfe.bin
-|F@ST2404 |web |3.0X? |openwrt-F@ST2404-cfe-<fs>-cfe.bin
-|F@ST2404 |web |3.1X? |openwrt-F@ST2404-<fs>-cfe.bin
-|GW6000 |web |3.00 |openwrt-GW6000-<fs>-cfe.bin
-|GW6200 |web |3.10 |openwrt-GW6200-<fs>-cfe.bin
-|Neufbox4 |web |3.12 |openwrt-NEUFBOX4-<fs>-cfe.bin
-|TD8810A |web |3.06 |openwrt-TD8810-<fs>-cfe.bin
-|TD8810B |web |3.06 |openwrt-TD8810-<fs>-cfe.bin
-|TD8811A |web |3.06 |openwrt-TD8811-<fs>-cfe.bin
-|TD8811B |web |3.06 |openwrt-TD881-<fs>-cfe.bin
-|TD8900GB |web |3.06 |openwrt-TD8900DB<fs>-cfe.bin
-|USR9108 |web |3.0X? |openwrt-USR9108-<fs>-cfe.bin
-|V2091_BTR |web |2.21 |openwrt-V2091_BTR-<fs>-cfe.bin
-|V2091_ROI |web |2.21 |openwrt-V2091-<fs>-cfe.bin
-|V2091_WB |web |2.21 |openwrt-V2091-<fs>-cfe.bin
-|V210_BTR |web |2.21 |openwrt-V210_BTR-<fs>-cfe.bin
-|V210_ROI |web |2.21 |openwrt-V210-ROI_WB<fs>-cfe.bin
-|V210_WB |web |2.21 |openwrt-V210-ROI_WB<fs>-cfe.bin
-|V2110 |web |2.21 |openwrt-V2110-<fs>-cfe.bin
-|V2110_AA |web |2.21 |openwrt-V2110-<fs>-cfe.bin
-|V2110_ROI |web |2.21 |openwrt-V2110-<fs>-cfe.bin
-|V2500V |web |2.21 |openwrt-V2500V<fs>-cfe.bin
-|V2500V_AA |web |2.21 |openwrt-V2500V-<fs>-cfe.bin
-|V2500V_SIP_CLUB |web |2.21 |openwrt-V2500V-<fs>-cfe.bin
-
-Old imagetag routers
---------------------
-Davolink DV201AMR
-
-Redboot routers
----------------
-Inventel Livebox
-
-Known router->code versions
----------------------------
-
-Vendor |Model |Code Ver
----------------------------+------------------------------------------+--------
-Belkin |F5D7633 |3.10
-British Telecom (BT) |Voyager V2091_BTR |2.21
-British Telecom (BT) |Voyager V2091_ROI |2.21
-British Telecom (BT) |Voyager V2091_WB |2.21
-British Telecom (BT) |Voyager V210_BTR |2.21
-British Telecom (BT) |Voyager V210_ROI |2.21
-British Telecom (BT) |Voyager V210_WB |2.21
-British Telecom (BT) |Voyager V2110 |2.21
-British Telecom (BT) |Voyager V2110_AA |2.21
-British Telecom (BT) |Voyager V2110_ROI |2.21
-British Telecom (BT) |Voyager V220V |2.21
-British Telecom (BT) |Voyager V2500V |2.21
-British Telecom (BT) |Voyager V2500V_AA |2.21
-British Telecom (BT) |Voyager V2500V_SIP_CLUB |2.21
-Comtrend |CT-5261 |3.02
-Comtrend |CT-536 |3.02
-D-Link |DSL-2640B |3.10
-D-Link |DSL-2670B |3.10
-NetGear |DG834GT |3.02
-NetGear |DG834PN |3.02
-Neuf Cegetel |Neufbox 4 |3.12
-Pirelli |Alice Gate Wi-Fi (+VoIP models?) |ag 3.06
-Sagem |F@ST2404 |?
-TP-Link |TD-8810A |3.06
-TP-Link |TD-8810B |3.06
-TP-Link |TD-8811A |3.06
-TP-Link |TD-8811B |3.06
-TP-Link |TD-W8900GB |3.06
-Tecom |GW6000 |3.00
-Tecom |GW6200 |3.10
-USR |9108 |?
-
projects / openwrt / openwrt.git / blobdiff