bcm63xx: Add support for Linux 3.0-rc3
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.0 / 011-add_bcm63xx_ehci_controller.patch
diff --git a/target/linux/brcm63xx/patches-3.0/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-3.0/011-add_bcm63xx_ehci_controller.patch
new file mode 100644 (file)
index 0000000..d287c52
--- /dev/null
@@ -0,0 +1,178 @@
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ drivers/usb/host/ehci-bcm63xx.c |  154 +++++++++++++++++++++++++++++++++++++++
+ drivers/usb/host/ehci-hcd.c     |    5 +
+ 2 files changed, 159 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-bcm63xx.c
+
+--- /dev/null
++++ b/drivers/usb/host/ehci-bcm63xx.c
+@@ -0,0 +1,154 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
++{
++      struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++      int retval;
++
++      retval = ehci_halt(ehci);
++      if (retval)
++              return retval;
++
++      retval = ehci_init(hcd);
++      if (retval)
++              return retval;
++
++      ehci_reset(ehci);
++      ehci_port_power(ehci, 0);
++
++      return retval;
++}
++
++
++static const struct hc_driver ehci_bcm63xx_hc_driver = {
++      .description =          hcd_name,
++      .product_desc =         "BCM63XX integrated EHCI controller",
++      .hcd_priv_size =        sizeof(struct ehci_hcd),
++
++      .irq =                  ehci_irq,
++      .flags =                HCD_MEMORY | HCD_USB2,
++
++      .reset =                ehci_bcm63xx_setup,
++      .start =                ehci_run,
++      .stop =                 ehci_stop,
++      .shutdown =             ehci_shutdown,
++
++      .urb_enqueue =          ehci_urb_enqueue,
++      .urb_dequeue =          ehci_urb_dequeue,
++      .endpoint_disable =     ehci_endpoint_disable,
++
++      .get_frame_number =     ehci_get_frame,
++
++      .hub_status_data =      ehci_hub_status_data,
++      .hub_control =          ehci_hub_control,
++      .bus_suspend =          ehci_bus_suspend,
++      .bus_resume =           ehci_bus_resume,
++      .relinquish_port =      ehci_relinquish_port,
++      .port_handed_over =     ehci_port_handed_over,
++};
++
++static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
++{
++      struct resource *res_mem;
++      struct usb_hcd *hcd;
++      struct ehci_hcd *ehci;
++      u32 reg;
++      int ret, irq;
++
++      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      irq = platform_get_irq(pdev, 0);;
++      if (!res_mem || irq < 0)
++              return -ENODEV;
++
++      reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
++      reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
++      reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++      bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
++
++      /*
++       * The magic value comes for the original vendor BSP and is
++       * needed for USB to work. Datasheet does not help, so the
++       * magic value is used as-is.
++       */
++      bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
++
++      hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
++      if (!hcd)
++              return -ENOMEM;
++      hcd->rsrc_start = res_mem->start;
++      hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++      if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++              pr_debug("request_mem_region failed\n");
++              ret = -EBUSY;
++              goto out;
++      }
++
++      hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++      if (!hcd->regs) {
++              pr_debug("ioremap failed\n");
++              ret = -EIO;
++              goto out1;
++      }
++
++      ehci = hcd_to_ehci(hcd);
++      ehci->big_endian_mmio = 1;
++      ehci->big_endian_desc = 0;
++      ehci->caps = hcd->regs;
++      ehci->regs = hcd->regs +
++              HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
++      ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++      ehci->sbrn = 0x20;
++
++      ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
++      if (ret)
++              goto out2;
++
++      platform_set_drvdata(pdev, hcd);
++      return 0;
++
++out2:
++      iounmap(hcd->regs);
++out1:
++      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++out:
++      usb_put_hcd(hcd);
++      return ret;
++}
++
++static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
++{
++      struct usb_hcd *hcd;
++
++      hcd = platform_get_drvdata(pdev);
++      usb_remove_hcd(hcd);
++      iounmap(hcd->regs);
++      usb_put_hcd(hcd);
++      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++      platform_set_drvdata(pdev, NULL);
++      return 0;
++}
++
++static struct platform_driver ehci_hcd_bcm63xx_driver = {
++      .probe          = ehci_hcd_bcm63xx_drv_probe,
++      .remove         = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
++      .shutdown       = usb_hcd_platform_shutdown,
++      .driver         = {
++              .name   = "bcm63xx_ehci",
++              .owner  = THIS_MODULE,
++      },
++};
++
++MODULE_ALIAS("platform:bcm63xx_ehci");
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1282,6 +1282,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER               ehci_grlib_driver
+ #endif
++#ifdef CONFIG_BCM63XX
++#include "ehci-bcm63xx.c"
++#define PLATFORM_DRIVER               ehci_hcd_bcm63xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+     !defined(XILINX_OF_PLATFORM_DRIVER)